COP-USA CHLP65IR-HSL User Manual

Page 1
Professional Camera
Clock F
NTSC:28.636Mh
PAL:28.375Mh
*
· 1/3" SONY CCD High Resolution
· 560TVL (Enhanced 620 TVL)
· 0.001 Lux, Slowshutter (Sense up to 32X)
· Slelectable Speed Shutter 1/60 sec. to 1/12000sec.
· Super Digital Noise Reduction (SDNR)
· ALC Automatic Light Compensation
· Heater Blower Weatherproof Housing
· ASP IR Cut Filter Removable
· 114 High Intensity LEDs
· Non Polarity Power input
· Dual Power DC12V / AC24V 3.5A
Specification Detail
Type: Color Day / Night IR Cut Camera Image sensor: High Res. 1/3" Color CCD Picture Elements: NTSC: 811(H)x508(V) PAL: 795(H)x596(V) Resolution: 560TVL Mini Illumination: 0.001 Lux (Adjustable) 114 PCs High Power IR LEDs ON Vertical Frequency: NTSC: 59.94Hz PAL:50Hz Horizontal Frequency: NTSC: 15.734 KHz PAL:15.625 KHz
requency: Scanning System: 2:1 Interlace S/N Ratio: More than 60dB Electronic Shutter : NTSC 1/60-1/12.000sec.; PAL1/50-1/12.000sec Lens: 20X Optical Zoom 5-100mm ASP IR Lens (Auto Iris) White Balance: OSD Backlight Compensation: OSD Auto Gain Control: OSD Gamma: 0.45 Video Output: 1.0Vp-p (75Ω BNC) Power Supply: DC12V or AC24V (±10%) Current Consumption: DC12V/AC24V 3.5A Recognition Distance: 15-30m Dimensions: 20x23x60 cm Weight: 4KG / 8Lbs Storage Temperature: Operating Temperature: -10°C ~ +45°C
-30°C ~ +60°C
z
z

CHLP65IR-HSL

Pictures and specifications are subject to change without prior notice
Page 2
High Resolution CCD Waterproof IR Camera
Futures
IP66 aluminum housing
ITEM : CHLP65IR-HSL
Remark: Non-regulative adaptor may cause
camera damage.
AI: AES: BLC:
AGC: ATW: AWB:
SENSEUP: H-MIRROR V- MIRROR
ZOOM:
ENHANCE:
GAMMA:
COLOR BAR:
FLC:
AUTO IRIS
CDS CONTROL
LED LIGHT
Auto IRIS Auto Electric shutter Back Light Control Auto Gain Control Auto Trace White Balance Auto White Balance Slow-Shutter Horizontal Mirror Vertical Mirror Digital zoom Definition enhance
Monitor Calibration Flicker less Lighting adjustment LED open adjustment LED power adjustment
High efficiency heat evaporating housing
IR anti-reflective glass
Special design IR LED and circuit prolongs
life spa n of I R LER
Build-in IR lens Max, the aperture range,
Caution for Installation
1. In order to prevent electric shock and/or water damage, don’t loosen any screws and/or covers.
2. Adjust the sunshield to avoid direct sunlight on to the lens.
3. Do not touch the front glass. If necessary, use a soft cloth moistened with alcohol to wipe off the dust.
4. Avoid places where are frequent vibrations or shocks.
5. Don’t operate the camera in an environment where the temperature reached beyond is specified.
6. When any abnormalities happen, make sure to unplug the camera and contact your local dealer.
Packing
1. Camera X1
Page 3
Attention: After you chose the default setting, please reset:
1. choose DC driver for LENS option.
2. set the shutter speed to 1/250 second.
Notes for installation:
1Power up with DV12V or AC24V . Note, if you want to use DC12V power supply, the power should exceed 3.5A.
2Adjust the lens in case of blurry picture
3The knob which close to the led board on the lens is Zoom, the other knob is Focus, adjust these 2 knobs so that you can get clear image.
4Shutter speed: according to the label posted on the control board, gives you a list of different shutter speeds, we recommend not to change it since the default shutter speed is 1/500 sec,
below this, you will be capturing plate’s number when the car’s reaches 150km/h.
5AUTO IRIS: to set up picture brightness for correct exposure, for better results, adjust under a daylight condition.
6CDS
to control it, please do not let CDS sensor be illuminated by road lamps or other light sources when installs.
7LED light : a djust LED output power, according to the real working environment; adjust this to let you see number plate clearly at night time.
8Installation way: (1) Camera height: 2.5m to 6m
(2) Distance from the cars: 5-30m
control: adjust the IR LED operating time; control how dark the LEDs are going to work. The CDS sensor is in the back of the camera, you can adjust
Page 4
(3) Lens adjustment: let the car on the image be as 70% width on the monitor so that you can clearly see the license plate number.
9. Shutter speed and car speed Chart:
Shutter speed MILE KM Shutter speed MILE KM Shutter speed MILE KM Shutter speed MILE KM
1/100 20 30 1/100 40 60 1/250 50 80 1/100 75 100 1/250 80 120 1/500 100 150 1/1000 120 180 1/1000 135 220
10. RS485 Camera control address instruction
DIP switch Address
code
DIP switch Address
0
5
11:485 pro tocol and keyboard control
DIP switch Address
code
1 2
6 7
code
DIP switch Address
code
3 4
8
DIP switch Address
code
9……
Page 5
Keyboard and correspondent bottoms on camera board
IRIS OPEN ENTER
ZOOM TELE UP
ZOOM WIDE DOWN
FOCUS FAR LEFT
FOCUS NEAR RIGHT
485 protocol:Pelco-D.2400bps
Page 6
ECITON
nwohs sa thgilkcaBronoitcelfeR etalpesnecilaecneirepxeuoyfI
ehtnignittessnelehtrednuwolot gnittessirIotuAeht teS,woleb
.yalpsiDneercSnO
snoitcurtsnI eht wolloF dna UNEMot og,yalpsiDneercSnOeht nI(
.*)woleB
4 PETS3 PETS2 PETS1 PETS
weiV thgiN
Click Here for Video Demo
UNEM SIRI CD
)04( SSENTHGIRB
otoG
tceleS
tceleS
UNEM
SNEL.)2(
SSENTHGIRB
egnahC
ot
04
)YAD(
otoG
tceleS
UNEM
egnahC
ot
YAD
UNEM THGIN/YAD
THGIN/YAD.)4(
ehtotoG UNEM
tceleS tceleS
egnahC
tceleS
egnahC
CGA.)3(
ot
/1
UNEM ERUSOPXE
)FFO(CGA
)052/1(RETTUHS
ERUSOPXE
otgnitteS
FFO
RETTUHS
0
)FFO(
otoG
tceleS
UNEM
egnahC
ot
UNEM RND D3
RND D3.)7(
FFO
.deeps hpm05 fo egareva na ta teeF 06 dna 03 neewteb secnatsid rof era stnemtsujda esehT*
,teeF06 ro 03 rof stnemtsujdA ytisnetnI sDEL RI roF*
.gnisuoh eht edisni draob eht no detacol laid eht esu
teef03
THGIL DEL
teef06
Loading...