COP-USA CHLP120IR-SDI Specsheet

SDI 1080P Shuttle & License Plate Camera

Shutter Speed Select

License Plate

Serial Digital Interface

CHLP120IR-SDI

• 1/2.8” COLOR SDI High Definition

• 1080P Full HD, 0 Lux, ICR, IR cut Filter.

• Slow Shutter (Sense Speed 32X)

• 224 High Power Intensity LED, 300 Feet.

• 10-120mm Auto Iris 2.0 Megapixels IR Lens

• Dual CDS, front CDS is High Resolution camera,
back CDS is License Plate Camera

• 10 dipswitch control, Bracket included

• Dual Power DC12V 4A /AC24V 60VA

1/60(50) sec 20 Miles 30 KM
1/10

0/120sec. 30 Miles 45 KM

1/25

0 sec. 40 Miles 60 KM
0 sec. 50 Miles 80 KM

1/50
1/10

00 sec. 75 Miles 120 KM

sec. 90 Miles 150 KM

1/20

00

1/40

00 sec. 110 Miles 180 KM

1/10000 sec. 135 Miles 220 KM

MENU LENS AUTO

EXP AIS

ense Plate Camera

Lic

ON

OFF

SDI High Definition Camera

SHUTTER

Switch NO.10

IR On

ON

The DIP

OFF

1 2 3 4 5 6 7 8 9 10

“IR On” Effective Distance“IR On” Effective Distance

Normal Camera

100Feet300Feet

100Feet

0Feet50Feet200Feet300Feet

* Specifications are subject to change without notice ** Designed in U.S.A.

RS485 Housing Control

(Box camera)

User's Manual

Notice

To reduce the risk of electric shock, please do not disassemble by yourself, it

should be repaired by a qualified technician.

The lightning arrow symbol reminds users that there is
dangerous voltage nearby, enough for a body to produce an
electric shock and cause bodily harm.

The caution symbol, reminds users to pay close attention to the
relevant instructions during the operation and maintenance of
the product.

Please fill in the product model and manufacturing number. This information will
assist you in the future should you need to refer to it for service or repair.

Model:
Number:

Important Safety Precautions

1、Before installation, please read the manual, and keep this

guide for future reference.

2、Please comply with all warnings on the device and follow the

instructions carefully.

3、 Please wipe or clean the device before connecting the device

to power, and please do not use liquid/spray cleaning agents.

4、Please used our recommended factory parts when in need of

repair, otherwise, failure may occur.

5、The device should use the recommended power and voltage from

the manual. If the power and voltage of the installation site

is unclear, please contact us for further assistance.

6、 Protect the power cord, especially along the plug and camera

data lines. Do not submerge in water or any liquids.

7、 To prevent lightning surge damage, please install surge

protectors.

8、 To prevent fire and electric shock, please do not over-extend

the data lines or allow foreign substances into

the machine which

may cause dangerous corrosion.

9、Do not

install in areas that have unstable brackets, walls,

roofs, etc. Otherwise, it may result in bodily harm.

10、Please contact your dealer should you have the following

issues:

10.1 Wrong power supply or voltage.

10.2 Damaged housing unit.

10.3 Abnormal behavior with device performance.

10.4 After consulting the user manual and it still does not

operate.

11、When part replacement is needed, please contact your dealer

so we can provide approved parts to maintain the same

performance.

I Summary .............................................. 6

II Features ............................................ 6

III Product Size Chart ................................. 8

IV Socket Function .................................... 9

1.Camera control board layout ...................... 9

2.Power board socket diagram ....................... 10

V Connecting different camera models ................. 12

1、Color box camera with DC12V .................... 12

2、Color box camera with AC24V ..................... 12

VI Auxiliary Preset Function ......................... 13

I. Summary

The integrated shell uses an all-metal construction, the

compatible color camera is protected and is for outdoor and

indoor equipped with light compensation at night。The unit has

a waterproof grade of IP66, uses EIA/RS-485 connections for

remote control, has internal and external infrared compensation

light for both near and far distances. The unit also is set

automatically to have infrared light at night.

II. Features

1、AC24V or DC12V compatible

2. When using DC12V, use FPC flexible connect lines;

3、When connecting integrated devices, a wire control function

is available for convenience.

4、The unit is set at default with a range address of:0-255, baud

rate is 2400, Pelco-D protocol;

5、 Dual power supply input, input voltage DC12V±10%/AC24V±

10%;

6、Photo Sensor can be adjusted on four levels,

front or back settings may be chosen;

7、Double-sided infrared is 15°distance more than 120M/394ft, power

is 15W, internal infrared is 45 ° ,5W, both near and far

infrared radiation;

8、All-metal construction is strong and durable, with IP66

Grade.

、Unit can use RS485 control, 120Ω Resistor;

9

10 、

11、Preset positions up to 32;

12、Has automatic on/off

13、Manual Settings to open or close;

IR Lights are optically triggered by camera

Infrared Control;

III. Product Size Chart

IV. Socket Function

1、Camera control board layout

1.1 BK1：DIP switch

1.1.1 1—8 address code，binary representation，ON is 1，OFF

is 0, from 8 to 1 reading:

If 1 is set ON, all other set off, is 00000001,that is decimal 1.

f 2 is set ON, all other set off, is 00000010,that is decimal 2.

And so on, the largest that is decimal 11111111，that is decimal 255.

th

1.1.2 The 9

is RS485 120Ω resistance select

switch,

1.1.3 The 10th is Photo Sensor switch,

set ON for the Photo Sensor in the Front, set OFF for the Photo Sensor i

in the Back

1.1 S1:Photo Sensor sensitivity has four Settings:
(00):1lux,(01):2lux,(02):4lux,(03):10lux

1.2 S3：D/N signal voltage

output select, low level, 3.3V option

1.3 J1：DC12V output，suitable DV12V box camera power supply.

1.4 J2：System program interface

1.5 J3： Photo Sensor input interface

1.6 J4：Box camera menu control output

D:down;U：up;E：MENU/confirm;R：right;L：left

1.7 J5：Output signal day and night,for day

with external

input control interface. this interface is

and night camera

available when infrared light and the camera's synchronizes.

CTL:According to the choice of S2 to output high level, low level

1.8 J6：DC12V power supply input，The interface board access DC12v

voltage from the power supply as the control panel input voltage。

（connect power supply J3）

1.9 J9：Board connector socket, make video signal and relay control

signal output to the power board(connect power board J8).1.10

J10：Board connect socket, RS485 control signal(connect power

board J7).

1.11 J12 ： Front Photo sensor Signal input

interface

2、Power Board Socket Diagram

2.1 P1：

2.2 J1，J2：AC24V/DC12V power input

2.3 J3：Board connected socket，DC12V output。（connect with Board J6）

2.4 J7：
Board connected socket，RS485 control signal。（connect with Board J10）

2.5 J8：Board connected socket，Video Signal and Relay control signal input。（connect with
Board J 9）

2.6 J9：RS485 control signal input。

2.7 J6，J10：both sides of the external infrared lamp supply power socket

BNC Video Output Signal



V. Connecting different camera models

1、DC12V Color Zoom Camera

Connect the J1 control panel output voltage mouth DC12V power to the input part of the
camera, video signal ouput by the camera BNC directly.

2、AC24V Color Zoom Camera

The power of zoom camera input directly by the external AC24V power input, video signal

output by camera BNC directly .

VI. Auxiliary Preset Function

Press button open" of keyboard to open camera menu or enter the

sub menu,Rocker lever up and down the menu, joystick left and

right selection options

Preset Faction Setting Transfer
51 IR electric mode / on
52 IR auto mode / on
53 Infrared Lamp on / on
54 Infrared Lamp off / on

Warning

SDI High Definition Camera

ON

License Plate Camera

OFF

ON

OFF

1 2 3 4 5 6 7 8 9 10

MENU LENS AUTO
EXP AIS SHUTTER

The DIP Switch

NO.10

Shu tter speed select

Lice n se Plate

0 OFF 20 Mi l e s 30 KM

1 A.FLK 40 Mi l e s

2 1/160sec. 50 Mil e s 80 KM

3 1/250sec. 65 Mi l e s

4 1/500sec. 80 Mil e s 130KM

5 1/700sec. 90 Mi l e s

6 1/1000sec. 110 M i l e s 180 KM

7 1/1600sec. 120 M i l e s

8 1/2500sec. 140 M i l e s 230 KM

60 KM

100 KM

160 KM

200 KM