COP-USA CG32WD User Manual

OSD Manual

For CG32WD Camera

CG32WD OSD Manual for function control

‘

Use the function setup switch (OSD switch) for function setup. OSD switch is different from model to model. Please refer to hardware installation guide of each model.

1. On Screen Display (OSD) Menu Configuration

MAIN MENU CAM NAME ON OFF LENS MANUAL DC EXPOSURE AGC SHUTTER SENSE-UP INITIAL SET PREVIOUS DAY/NIGHT AUTO DAY NIGHT EXT WDR/BLC/ECLPS WDR BLC ECLPS OFF WHITE BAL ATW COL-ROLL PUSH MANUAL 3D-DNR ON OFF

EFFECTS

SPECIAL

DZOOM MODE IMAGE FREEZE D-E COLOR ADJUST INITIAL SET PREVIOUS ITS MODE MOTION DET PRI L/L SYNC MONITOR T

YPE FACTORY RESET COMM SET PREVIOUS

EXIT

2. Setting up the menu

1. Press the Tact SW to enter <MAIN MENU>.

2. Move the arrow to a specific menu by pushing the Tact SW up or down.

3. Adjust the selected feature by pushing the Tact SW left or right

4. When completed, move the arrow indicator to ‘EXIT’ and press the Tact SW to finish all settings.

FFECT CONTRAST SHARPNESS

VACY MASK LANGUAGE STABILIZER

MAIN MENU

1. CAM NAME

2. LENS

3. EXPOSURE

4. DAY/NIGHT

5. WDR/BLC/ECLPS

6.WHITE BAL

7. 3D-DNR

8.EFFECTS

9.SPECIAL

10.EXIT

SUB MENU

OFF MANUAL

AUTO WDR ATW ON

RET

☞ Note

• If ‘ ‘ indication appears on a selected sub-menu, press the Tact SW to get into a following menu.

• If ‘ --- ‘ indication appears on any sub-menu, it means the function with this mark is deactivated. (Ex : When SENS-UP is OFF, 3-DNR becomes deactivated ‘---‘ )

3. CAM NAME

- Please position the arrow to point to ’CAM NAME’ by using the UP or DOWN selection.

- Please select ‘ON’ by using the LEFT and RIGHT selection. Please press the button to complete ‘ON’. ☞ Note If ‘OFF’ is selected, the CAM NAME does not appear on the

1. CAM NAME

2. LENS

3. EXPOSURE

4. DAY/NIGHT

5. WDR/BLC/ECLPS

6.WHITE BAL

7. 3D-DNR

8.EFFECTS

9.SPECIAL

10.EXIT

OFF MANUAL

AUTO WDR ATW ON

RET

monitor even if it has been input.

- Up to 15 letters are offered for the CAM NAME. If you enter a title, the title will appear on the monitor.

① Please move the cursor to the letter to choose by using the

UP and DOWN selections.

② Set an ID from A~Z /a~z /0~9 by using the UP, DOWN, LEFT

and RIGHT Selections. ③ Lock in the letters by using the button.

•

When the letter is locked in, the cursor moves to the next space.

④ Please repeat the above to input CAM NAME.

☞ Note

When a wrong name has been input,

- If you press the button after moving the cursor to CLR, all letters will be erased.

- If you want to correct a letter, please move the cursor to the arrow at the bottom left of the screen and press the button.

- Please position the cursor on the letter you wish to correct, and then move the cursor onto the letter you wish to choose and press the button.

- When a name has been chosen, please select a position for the name to display.

2 3

(2) SHUTTER A. AUTO : The shutter speed is controlled automatically. (※ Default) B. FLK : Please select FLK mode when flickering occurs on the screen, due to an imbalance between illumination and frequency. C. FIXED : The shutter speed is controlled manually.

① Please move the cursor onto ’POS’ and then press the button. ② The name will appear at the top left hand corner. ③ Please find the position you wish to display the name by using the 4 directional

selections, and then press the Button.

- Please select ‘END’ and then press the Button to complete CAM NAME input.

4. LENS

୛ This camera only accepts Manual lens mode.

1. Please select the lens mode to MANUAL.

2. Press the Tact SW to enter the <MANUAL IRIS MENU>.

- BRIGHTNESS: adjust the brightness of screen when the environment is extremely bright or dark.

- REACTION: Reaction speed of the shutter is adjustable. It is useful when the light condition of the environment keeps changing quickly.

3. Save Press SAVE to finish all settings and return to <MAIN MENU>

1. CAM NAME

2. LENS

3. EXPOSURE

4. DAY/NIGHT

5. WDR/BLC/ECLPS

6.WHITE BAL

7. 3D-DNR

8.EFFECTS

9.SPECIAL

10.EXIT

BRIGHTNESS REACTION SPEED SAVE

5. EXPOSURE

(1) AGC (Auto Gain Control)

- OFF : Deactivates the AGC function.

- LOW : Allows automatic gain control from 0 to 20dB. (※ Default)

- MIDDLE: Allows automatic gain control from 0 to 30dB.

- HIGH: Allows automatic gain control from 0 to 42dB.

※ The higher the gain level, the brighter the screen becomes while the higher the noise as well.

OFF MANUAL

AUTO WDR ATW ON

RET

50......|.....

8.|..........

- You can select the speed from ‘1/60’ to ‘1/90,000 sec. (NTSC), ‘1/50’ to ‘1/90,000 sec. (PAL).

- You can select Digital Slow Shutter. (DSS) between x2 ~ x512.

※ Please use FIXED mode only when the light level of the surveillance area is fixed all the time.

(3) SENS-UP

- Low light sensitivity is greatly improved with the use of this function.

- Low light sensitivity level is adjustable from 2 to 512 times.

- When SEN-UP level is higher, the picture becomes brighter while noise is increased at the same rate of SENS-UP.

ON : Adjustable SENS-UP level between x2 ~ x512. OFF: SENS-UP is disabled.

※ Default setting is <x8>

☞ Note

• When the SHUTTER is set to MANUAL mode, SENS-UP does not operate.

• When the AGC is set to OFF, SENS-UP does not operate.

(4) INITIAL SET Initialize all settings of EXPOSURE menu.

(5) SAVE Save the settings

6. DAY / NIGHT

It is used to improve the sensitivity and clarity of picture quality at low light

- DAY : The image is always displayed in color.

- NIGHT : The image is always displayed in black and white.

1. CAM NAME

2. LENS

3. EXPOSURE

4. DAY/NIGHT

5. WDR/BLC/ECLPS

6.WHITE BAL

7. 3D-DNR

8.EFFECTS

9.SPECIAL

10.EXIT

- AUTO1 : The image is automatically converted to B/W from Color at 3 lux.

● IR WDR LEVEL : Select Anti - IR saturation level among OFF/LOW/MIDDLE/HIGH

>IR WDR LEVEL IR WDR ADJUST

● IR WDR ADJUST : Adjust the value in each of selected level - 0 ~ 6

OFF MANUAL

AUTO WDR ATW ON

RET

HIGH

3....|........

4 5

+ 4 hidden pages