Page 1
Specification
Model
Image Sensor
Resolution
Signal System
Minimum Illumination
S/N Ratio
Synchronous System
IR Distance
IR Power On
Video Output
Power/Current
Lens
Weather Proof
CD39ZM-4N1-STA
1/2.8" SONY IMX290Starvis 2.1MP
Eyenix 771E Back-illuminated CMOS Sensor
1080P
PAL / NTSC
0.001 Lux/F1.2
More than 52dB
Internal
30 Meters
Photodiode AUTO Control
CVBS/CVI/TVI/AHD
DC12V(+/-10%)/700mA
2.8-12mm Motor Zoom & Auto Focus Lens
IP66
CD39ZM-4N1-STA
4n1 SONY Starvis Weatherproof
Motorized Varifocal Camera
Dimension (mm)
Weight (g)
Operating Conditions
Accessorieslist
Name Number
Camera 1
User Guide 1
Φ131 x 93(H)
800
-10~+50℃ RH95% MAX
Notes:
Do not attempt to disassemble the camera. If the camera
can not work, please contact local franchiser or our company.
Thank you for using our product.
Before providing power for the camera, please read
this manual carefully before use.
We adopt the latest technical of sensor and driver.
It owns the characters of high definition and stability,
strong anti-jamming, rich and real color. Fixing and
using this model are convenient too. It is very good
for you to apply to your CCTV system.
*pictures and specifications subject to change or
typographical errors without notice
Page 2
MainFeatures
Deviceconnection
CommonProblemsandTroubleshooting
> Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
Can get high definition picture in low Lux condition.
> Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
> Scanning Mode
NTSC or PAL mode.
> Signal Switch
AHD MODE: hold up key 5s.
CVI MODE : hold down key 5s.
CVBS MODE : hold left key 5s.
TVI MODE : hold right key 5s.
Press towards desired video technology for 5 sec. within 10
sec. of connecting power.
> Menu
IRIS MANUAL / AUTO
FOCUS ADJ OFF / ON
EXPOSURE
BACKLIGHT OFF / HLC / BLC / WDR
DAY&NIGHT EXTERN / AUTO / COLOR / B&W
COLOR AWB / COLOR GAIN / TV FORMAT
DNR MIDDLE / HIGH / LOW / OFF
IMAGE
MOTION OFF / ON
SYSTEM
EXIT SAVE / CANCLE
BRIGHTNESS / SHUTTER / SENS-UP /
AGC
SHARPNESS / GAMMA / MIRROR /
FLIP / ACE / DEFOG / RPIVACY
TV SYSTEM / FRAME RATE / FREQ /
IMAGE RANGE / COLOR SPACE /
COLOR BAR / LANGUAGE / CAM TITLE / RESET
Safetyinstruction
1.Before using the camera ,please read this manual carefully and
keep it safely for later use.
2.Installation should be proceed by professional service and follow
manufacturer’s instructions, do not dismantle without authoriza
tion.
3.In order to prevent sensor ,do not expose lens to intense light
source in long time.
4.Do not touch sensor directly. Please covers the dustproof cover
when the camera is not being used.
5.Please use a dry soft cloth to clean the camera. If dirt difficult to
clean, use detergent with water and wipe dry the camera.
6.Do not install camera under air conditioning’s air gate ,or else
lens blur with condensation of moisture.
7.Please ensure that all electric power sources are turned off
when not open , installation ,clean, etc operation.
8.Please transporting , using and storing the camera in allowable
temperature and humidity.
9.If the camera was broken, for example power cord or plug damaged,Splash liquid or foreign matter fall into camera, raining,
wetting, etc can’t work situation, please contact manufacturer
or maintenance center (modify and maintenance without perm
ission, you must be responsible for the problems).
> No Picture after providing power
May be the power supply voltage abnormity, please check
he power supply voltage and pole whether exactitude.
Please check all the connecting cable and monitors whether
be connected correctly or not.
> The picture level direction have flowing interference
ripples
May be caused by the power supply AC ripples, it need filter
the wave of the power supply.
Check the monitor and peripheral equipments used.
> The picture background color changes continuously
The fluorescent lamp’s electromagnetic field cause color roll.
This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the
distance between the camera and the fluorescent lamps can
improve it.
Use power supply external sync. camera can solve it.
> The picture smear too mass
The power supply’s voltage unstable.
Connecting cables not connect correctly or have high
impedance.
Note:
• Please note the camera’s operating temperature and its
using environment
at too high or too low temperatures. The operating tem
perature is -30~+60℃. (Recommendatory operating tem
perature is -10~+50℃.)
• Do not mount the camera near by the radiator or heater.
*All logos and copyright belong to their respective owners
requirement. Avoid using the camera
Loading...