COP-USA CC45WD Specifications

Wide Dynamic High Resolution Color Camera

ITEM NO.: CC45WD

Menu and Operation

Press the “menu” button, then press “enter” for menu control options

Under main menu mode, select “↑” or “↓”.for sub-menu options.
Select “←” or “→” for submenu mode selection.
The blinking cursor will indicate that this category has been selected.

In the submenu, press “EXIT MENU” to return to the main menu.

＊ Quick Wide Dynamic Camera Setup
＊ 1. Under the OSD (On Screen Display), Select Lens 。
＊ 2. Adjust Brightness【50】 (00 to 100)
＊ 3. Set Wide D ynamic Ran ge (WDR)
＊ 4. Set WDR LEVEL （LOW/MIDDLE/HIGH）

OSD

Manual

SPECIFICATION:

CAM NAME OFF
LENS DC IRIS
EXPOSURE
DAY/NIGHT AUTO
WDR/BLC/ECLPS WDR
WHITE BAL ATW
3D-DNR ON
EFFECTS
SPECIAL
EXIT

RET

1

IRIS JACK DC-LENS

P1 DUMP­P2 DUMP+

234

P3 DRIVE+
P4 DRIVE-

MODE NO. CC45WD

TV SYSTEM NTSC PAL
IMAGE SENSOR COLOR 1/3-inch CCD Sensor
CCD TOTAL PIXELS 811(H) X 508(V) 795(H) X 596(V)
SCANNING SYSTEM 525 lines, 60 fields/sec 625 lines, 50 fields/sec
SYNC SYSTEM Internal / Line-Lock
MINIMUM
ILLUMINATION
LENS

Legacy mode 0. 05 Lux ( F1.2 , 5600ºK )
Star light Mode 0.0008 Lux ( F 1.2 , 5600ºK )

CS-mount

RESOLUTION 600 TVL
WHITE BALANCE PUSH/MANUAL/ATW/COL-ROLL
GAIN CONTROL SELECTABLE BY OSD MANUAL
S / N RATIO 52dB ( MIN) / 60dB ( TYP ) (AGC OFF)
AUTO IRIS A.E.S. / DC
OSD DISPLAY ON SCREEN DISPLAY FOR ALL CONTROL
WIDE DYNAMIC 52dB ( MAX) (Required DC-IRIS lens)
VIDEO OUTPUT Composite output 1.0V p-p at 75 ohm
GAMMA CORRECTION 0.45 / 1.0 (SELECTABLE BY OSD MANUAL)
OPERATION TEMPERATURE -20 º C TO 50 º C
OPERATIONAL HUMIDITY within 85 % RH
POWER SUPPLY

*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Dual Power: AC 24V / DC12V 350mA