COP-USA 24VAC-60VA Specsheet
CUSTOMER
TYPE
SPECIFICATION
PART
THIS SPECIFICATION SUBJECT TO:
1. ELECTRICAL CHARACTERISTICS:
1.1INPUT RATED VOLTAGE AND FREQUENCY: / 120 V / 60 Hz.
1.2. EXCITING CURRENT: / 225 mA MAX (AT 1.1 ITM).
1.3. OUTPUT VOLTAGE REGULATION:
LEADS NO.FULL LOAD RATED VOLT.RATED CURRENTUNLOADED VOLT.RIPPLE VOLT.
AC24V±5%2500mA ≤AC30V
2. HI-POT TEST: P-S 1.5 KV, P-C 1.5 KV, S-C: 0.6 KV(AC 3mA 1MIN).
3.INDUCED VOLTAGE: ALL SECONDARY WINDINGS OPEN, INPUT PRIMARY V Hz.
(30S), SHALL WITHSTAND WITHOUT BREAKDOWN.
4. INSULATION TEST: Rl-o: 10 MΩ(DC 500V).
ADAPTOR
5.TEMPERATURE RISE: 75 MAX ( RESISTANCE METHOD).℃
6. APPEARANCE DRAWING: I/P CORD:
W3ASPT2AWG18#6FT
O/P CORD:
W45AWG20#300mm
O/P PLUG:
Connection pole
7. CIRCUIT DIAGRAM： 8. OTHERS:
设计 安规 审核 批准 /PAGE页次
/
Loading...