COP Security 15-CA25D, 15-CA25DNV Instruction Manual

15-CA25D / 15-CA25DNV

INSTRUCTION MANUAL

OVERVIEW

The CA25D/CA25DNV are medium resolution colour camera. Both

cameras built in an advanced DNR system (Digital Noise Reduction).

DNR can significantly reduce the image noise under low light

conditions. Especially with the Auto Gain Control switched on (AGC

on).

FEATURES

• 1/3” SONY SUPER HAD CCD

• LOW POWER CONSUMPTION

• DUAL POWER SUPPLY (12vDC or 24vAC)

• HI SENSITIVITY

• HI SPEED WHITE BALANCE MODE

• BUILT-IN DSS-DIGITAL SLOW SHUTTER FUNCTION

• BUILT-IN DNR-DIGITAL NOISE REDUCTION FUNCTION

• TWISTED PAIR INTERFACE

• C/CS LENS MOUNT-BACK FOCUS ADJUSTABLE

PRECAUTION

Do not open or modify

Do not adjust or modify the camera’s internal circuits or power supply
modules, as it may be dangerous and cause damage to the unit. For
internal settings and repairs, consult our dealer.

Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside
the camera that may cause damage to the unit. If water or a liquid get
inside the camera, disconnect the power cable immediately, and
consult your dealer. Be careful to protect the camera from direct
exposure to weather, rain, etc.

Be careful when handling the unit

Do not drop the camera or subject it to strong shock or vibration.

Install away from electric or magnetic fields

It may interfere with or distort the image when install close to an electric
or magnetic fields. Ex: TV, Speaker, etc.

Protect from humidity, dust and high temperatures

Do not install it where there is greasy smoke or steam, where the moisture may
get too high, or where there is a lot of dust...
Do not install close to stoves, or other heat generating devices, such
as spotlights, etc….
Avoid places where there is direct sunlight.

Cleaning

Do not directly touch the CCD element. If necessary, use a soft cloth
moistened with alcohol to wipe off any dust.