■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
PRESSURE TRANSDUCERS WITH AMP.
PA-860/PA-868
Part name Material
Sensor chip
Stainless steel diaphragm
Back cover
Drip-proof cover
Fitting
1
2
3
4
5
3
5
Silicone
SUS 316L
Iron, Ni-plated
SUS 303
Silicone rubber
INTERNAL STRUCTURE
PA-860/PA-868
● Resistant against surge pressure
● SUS 316L welded stainless steel diaphragm
● Built-in amplifier circuit
● Voltage or current output modes are available
■ FEATURES
■ MODEL NUMBER DESIGNATION
PA-860 - 503 P - B - R2
Series name
Rated pressure range
PA-860 : Voltage output
PA-868 : Current output
503 : 0 ~ 5 MPa
104 : 0 ~ 10 MPa
204 : 0 ~ 20 MPa
354 : 0 ~ 35 MPa
Pressure unit
P : Pa pressure unit
Fitting
R2 : R 1/4
G3 : G 3/8
Drip-proof cover
B : Non-provided
H : Provided
❈ Please refer to the LIST OF MODEL NUMBERS when placing orders.
2
1
Pressure
4
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
Pressure reference
Gauge
0 ~ 5 0 ~ 10 0 ~ 20 0 ~ 35
Rated pressure range
[MPa]
Output Fitting
Voltage
output
R2
(R 1/4)
G3
(G 3/8)
Current
output
R2
(R1/4)
G3
(G 3/8)
Non-provided
Provided
Non-provided
Provided
Non-provided
Provided
Non-provided
Provided
■ LIST OF MODEL NUMBERS
PA-860-503P-B-R2 PA-860-104P-B-R2 PA-860-204P-B-R2 PA-860-354P-B-R2
PA-860-503P-H-R2 PA-860-104P-H-R2 PA-860-204P-H-R2 PA-860-354P-H-R2
PA-860-503P-B-G3 PA-860-104P-B-G3 PA-860-204P-B-G3 PA-860-354P-B-G3
PA-860-503P-H-G3 PA-860-104P-H-G3 PA-860-204P-H-G3 PA-860-354P-H-G3
PA-868-503P-B-R2 PA-868-104P-B-R2 PA-868-204P-B-R2 PA-868-354P-B-R2
PA-868-503P-H-R2 PA-868-104P-H-R2 PA-868-204P-H-R2 PA-868-354P-H-R2
PA-868-503P-B-G3 PA-868-104P-B-G3 PA-868-204P-B-G3 PA-868-354P-B-G3
PA-868-503P-H-G3 PA-868-104P-H-G3 PA-868-204P-H-G3 PA-868-354P-H-G3
Drip-proof cover
❈ : Verify the above model numbers when placing orders.
❈1 : The transducer measures gauge pressure using an absolute pressure sensing element.
General specifications
■ STANDARD SPECIFICATIONS
Item
Pressure reference
Rated pressure range
Maximum pressure
Operating temp. range
Compensated temp. range
Storage temp.
Operating humidity
Pressure medium
Insulation resistance
Dielectric strength
Pressure port
Net weight
Drip-proof structure
Model number
PA-860 PA-868
503P 104P 204P 354P 503P 104P 204P 354P
Gauge ❈1
5102035 5 1020 35
10 20 40 50 10 20 40 50
Hydraulic oil
Approx. 170
Without drip-proof cover : IP-54, With drip-proof cover : IP-65
100 (500 V DC)
350 V AC, 60 s (Leakage current 0.5 mA maximum)
R 1/4
、
G 3/8
0 ~ 50
35 ~ 85 (No condensation)
−
20 ~ 90 (Atmospheric pressure, humidity 65 %RH maximum)
− 10 ~ 75
MPa
MPa
°C
°C
%RH
°C
MΩ
minimum
g
● Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 12 V DC.
PA-860/PA-868
PRESSURE TRANSDUCERS WITH AMP.
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
Analog output
Thermal error
Consumption current
Output voltage/current
Zero voltage/current
Span voltage/current
Linearity/Hysteresis
Load resistance
Response
1 ± 0.05 V 4 ± 0.1 mA
4 ± 0.05 V 16 ± 0.1 mA
± 0.5
± 0.05
± 0.05
10 mA ————
1 ~ 5 V 4 ~ 20 mA
10 kΩ minimum
500 Ω maximum (At power voltage 24 V)
20
ZERO
%F.S./°C
%F.S.
SPAN
%F.S./°C
ms
maximum
Item Model number
PA-860 PA-868
503P 104P 204P 354P 503P 104P 204P 354P
Power
Supply voltage
12 ~ 24 ± 10 %
V DC
maximum
DC
PA-860/PA-868
PRESSURE TRANSDUCERS WITH AMP.
■ INTERNAL ELECTRICAL SCHEMATICS
● PA-860 ● PA-868
■ STANDARD SPECIFICATIONS
● Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 12 V DC.
■ ENVIRONMENTAL CHARACTERISTICS
Test item
Test conditions (At 25 ± 5 °C)
Permissible change
Vibration
10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s
2
,
3 directions for 2 hours each
490 m/s
2
, 3 directions for 3 times each
0 ~ Rated pressure, 10
6
cycles
40 °C, 90 ~ 95 %RH, 240 hrs.
Zero voltage/current, Span voltage/current:
± 3 %F.S. maximum each
Shock
Pressure cycling
Moisture resistance
Pressure
Sensor
Main circuit
Power B
Output
Common C
Shield
Pressure
Sensor
Main circuit
Power B
Common C
Shield
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
PA-860/PA-868
PRESSURE TRANSDUCERS WITH AMP.
● Configurations of joint G3 (G 3/8) type
● Configurations of joint R2 (R 1/4) type
● Drip-proof cover type
■ OUTLINE DIMENSIONS Unless otherwise specified, tolerance : ± 0.5 (Unit: mm)
Wire color
PA-868
Red
Black
White
Gray
Connection
Power
B
N.C.
Output
Shield
Wire color
PA-860
Red
Black
White
Gray
Connection
Power
B
Common
Output
Shield
Please make sure that the dripproof cover is properly placed
over the main body and the cable.
0
–0.3
30
16.8 ± 0.1
φ
Pressure port
φ
1.6
G 3/8 (PF 3/8)
(Iron, Ni-plated)
1 ± 0.1
0
–0.3
30
(41)
16 25
(41)
15 26
Label
7
Label
7
φ
( 30)
φ
( 30)
PRESSURE TRANSDUCER
φ
3-core shielded cable
L = 2000 ± 100 AWG22 ULNo.20276
PRESSURE TRANSDUCER
( 4.9)
Pressure port
G 3/8 (PF 3/8)
(Iron, Ni-plated)
φ
1.6
Drip-proof cover
φ
3-core shielded cable
L = 2000 ± 100 AWG22 ULNo.20276
( 4.9)
Loading...