COPAL ELECTRONICS PA-500 User Manual
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
Pressure reference
Gauge
0 ~ 9.81
{0 ~ 0.1}
0 ~ 49.0
{0 ~ 0.5}
0 ~ 98.1
{0 ~ 1}
0 ~ 343
{0 ~ 3.5}
0 ~ 490
{0 ~ 5}
0 ~ 981
{0 ~ 10}
0 ~ −98.1
{0 ~ −1}
Rated pressure range
kPa {kgf/cm
2
}
± 0.06 % F.S./°C
± 0.1 % F.S./°C
Part name Material
Glass stand seat
Brass + Nickel-plated ❈1
❈1 : SUS 304 for 102V
Borosilicated glass
Fluoro-rubber
Silicone
Aluminum
Vinyl chloride resin
Fitting
Sensor chip
“O” ring
Housing
Cable
1
2
3
4
5
6
INTERNAL STRUCTURE (Gauge type)
● High output gain by built-in hybrid electronic amp.
● Built-in temperature compensation function (0 ~ 50 °C)
● Pressure medium compatible with both liquid and gas
pressures (Gauge)
■ FEATURES
■ MODEL NUMBER DESIGNATION
■ LIST OF MODEL NUMBERS
PA-500 - 501 G - 06
Series name
Rated pressure range
101：0 ~ 9.81 kPa {0 ~ 0.1 kgf/cm2}
501：0 ~ 49.0 kPa {0 ~ 0.5 kgf/cm
2
}
102：0 ~ 98.1 kPa {0 ~ 1 kgf/cm
2
}
352：0 ~ 343 kPa {0 ~ 3.5 kgf/cm
2
}
502：0 ~ 490 kPa {0 ~ 5 kgf/cm
2
}
103：0 ~ 981 kPa {0 ~ 10 kgf/cm
2
}
Thermal error
06: ± 0.06 % F.S./°C 10：± 0.1 % F.S./°C
Pressure reference
G : Gauge
V : Gauge (Vacuum)
PA-500
-501G-06
PA-500
-101G-10
PA-500
-501G-10
PA-500
-102G-10
PA-500
-352G-10
PA-500
-502G-10
PA-500
-103G-10
PA-500
-102V-10
PA-500
-102G-06
PA-500
-352G-06
PA-500
-502G-06
PA-500
-103G-06
PA-500
-102V-06
Thermal error
: Not available ❈ Verify the above model numbers when placing orders.
PRESSURE TRANSDUCERS WITH AMP.
PA-500
1
3
2
4
5
6
Pressure
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONIC
S
Oct,
2005
General specifications
Power
Analog output
■ STANDARD SPECIFICATIONS
Item
Pressure reference
Rated pressure range
Maximum pressure
Break-down pressure
Operating temp. range
Compensated temp. range
Storage temp.
Operating humidity
Thermal error
0 ~ 50 °C
(Reference temp.: 25 °C)
Supply voltage
Ripple content
Consumption current
Output voltage
Zero voltage
Span voltage
Output current
Linearity/Hysteresis
Pressure medium
Insulation resistance
Dielectric strength
Pressure port
Supply voltage effect
Response
Net weight
Model number
PA-500
101G 501G 102G 352G 502G 103G 102V
Gauge
9.81 49.0 98.1 343 490 981 − 98.1
{0.1} {0.5} {1} {3.5} {5} {10} {−1}
19.6 98.1 196 686 981 1961 196
{0.2} {1} {2} {7} {10} {20} {2}
49.0 245 490 1030 1471 2941 490
{0.5} {2.5} {5} {10.5} {15} {30} {5}
Non-corrosive gases / Non-corrosive liquids
Approx. 85
1 ~ 5
1 ± 0.04 (at 25 °C)
4 ± 0.04 (at 25 °C)
1 (Load resistance: 5 kΩ minimum)
± 0.5 ± 0.3 ± 0.5
Approx. 1
12 ~ 24 ± 10 %
10 % (P-P)
20 mA
100 (500 V DC)
500 V AC, 60 s (Leakage current 1 mA maximum)
R 1/4 G 1/4
(PT 1/4) (PF 1/4)
0 ~ 50
35 ~ 85 (No condensation)
−
20 ~ 80 (Atmospheric pressure, humidity 65 %RH maximum)
− 20 ~ 80
± 0.1 ± 0.06/0.1
± 0.1 ± 0.06/0.1
± 0.1
kPa {kgf/cm
2
}
kPa {kgf/cm
2
}
kPa {kgf/cm
2
}
°C
°C
%RH
°C
ZERO %F.S./°C
%F.S.
SPAN %F.S./°C
V DC
maximum
maximum
V
V
V
mA maximum
MΩ minimum
V maximum
ms
g
● Unless otherwise specified, the specs are defined at an ambient temperature of 25±5 °C and excitation voltage of 12 V DC.
PA-500
PRESSURE TRANSDUCERS WITH AMP.
Loading...