ASSEMBLY INSTRUCTIONS
1
IDENTIFY ALL PARTS AND HARDWARE THAT ARE
INCLUDED WITH YOUR A-FRAME LADDER. FOR
EASE IN BUILDING, WE SUGGEST EITHER A PARTNER
OR A PAIR OF CLAMPS.
Chicken Roosting Ladder Small
Model# 223-03
1
2
A
2"
8 pcs
FRONT LADDER RAIL
2
ALIGN THE FRONT LADDER RAIL (1) WITH THE TOP CAP (3)
AND INSERT/SLIDE THE TONGUE/GROOVE SECTION IN A
SNUG MANNER. REPEAT WITH REAR LADDER RAIL (2). TAKE
CAUTION IN ENSURING THE TOP SECTION OF THE LADDER IS
SMOOTH AND EVEN ACROSS THE TOP. INSERT SCREWS (A)
ONE AT A TIME INTO OUTSIDE PRE-DRILLED HOLES AND
LOOSELY TIGHTEN WITH EITHER A SCREWDRIVER OR A DRILL.
PLEASE NOTE, YOU WILL SECURE THESE 4 SCREWS LATER AS
THE LAST STEP.
3
TOP CAP
A
REAR LADDER RAIL
4
(2) SUPPORT BARS
A
3
A
2
A
1
A
4x
3
INSERT SUPPORT BAR (4) ONE AT A TIME INTO
TONGUE/GROOVE INSERTS AND PLACE SCREWS
(A) INTO OUTSIDE PRE-DRILLED HOLES ONE AT A
TIME. REPEAT WITH OPPOSITE SIDE.
A
TIGHTEN TOP SCREWS
4
FOR LONGER LIFE, A SEALANT IS RECOMMENDED
FOR THE WHOLE UNIT.
5
SET OUTSIDE FOR FREE-RANGE BIRDS OR WITHIN
YOUR COOP SETTING AND LET YOUR BIRDS ENJOY!
4x
A
A
4
4
A
A
Loading...