Cooper Lighting Solutions RL4 User Manual
Description
5.12”
[130.13mm]
The Halo Home RL4 is an integrated LED module with Bluetooth® Mesh
connectivity for 4” aperture recessed downlights. When paired with the Halo
Home mobile app or Halo Home in-wall dimmers, the RL4 can be wirelessly
controlled. Suitable for new construction, remodel and retrofit installation.
Listed for use with Halo 4” housings and classified for use with other 4”
housings, airtight and can be used with housings in direct contact with
insulation. The RL4 is designed to connect to the Halo Home Bluetooth Mesh
network with no hub or internet connection required.
Specification Features
Wireless System
•
For use with the Halo Home
mobile app.
•
Bluetooth low energy (BLE) mesh
allows on/off, white tuning and
lumen output to be controlled
wirelessly with companion wall
switches, smart phones and tablets
using Halo Home mobile application.
•
Group, schedule, scenes and
automate lighting actions through
Halo Home mobile app.
Wireless Pairing
•
See Halo quick start guide for
wireless setup, guidance and
troubleshooting.
Module - Trim
•
Module construction includes LED
Array, heat sink, reflector, lens, baffle
and trim ring.
•
Regressed baffle
•
Heat sink designed to conduct
heat away from the LED Array,
keeping the junction temperatures
below specified maximums, even
when installed in insulated ceiling
environments.
LED Array
•
Mid power LED array provides a
uniform source with high efficiency
and no pixilation.
•
90 CRI minimum, R9 greater than 50
•
Color accuracy within 3 SDCM at
the CCT endpoints and 4 SDCM in
between endpoints, provide color
accuracy and uniformity.
•
Color Temperature (CCT) has an
adjustable range from 2700K
to 5000K within the mobile app
(factory default 3000K)
•
50,000 hour life
Optical Assembly
•
Regressed lens
•
Impact-resistant polycarbonate
•
Convex form and lamp-like
appearance
•
Diffuse for even illumination
Driver
•
Integral 120V 50/60 Hz constant
current driver provides noise free
operation
•
Inline electrical quick connect and
E26 adapter (provided) provides
mains connections
•
Consult instruction sheets and quick
start guide for more information
Dimming
•
In the mobile app, continuous,
flicker-free dimming from 100%
to 5%.
•
It is not recommended with any in
wall dimmers.
Retention
•
Push-N-Twist universal installation
clips
•
Clips are pre-installed and designed
to fit 4” compatible recessed
housings
Designer Skins (sold separately)
•
RL4 skins are accessory rings that
attach to the RL4 for a permanent
finish. Refer to the RL4 accessories
specification sheet for details.
• White (Paintable)
• Satin Nickel
• Tuscan Bronze
Gaskets
•
Closed cell gaskets achieve
restrictive airflow requirements
without additional caulking
Catalog #
Project
Comments
Prepared by
Compliance
•
cULus certified for use with Halo
housings and other's housings
•
Wet and Damp location listed
•
Airtight certified per ASTM-E283
•
Suitable for use in clothes closets
when installed in accordance
with the NEC 410.16 spacing
requirements
•
EMI/RFI emissions per FCC 47CFR
Part 15 consumer limits
•
Contains no mercury or lead and
RoHS compliant
•
Photometric testing in accordance
with IES LM-79-08
•
Lumen maintenance projections in
accordance with IES LM-80-08 and
TM-21-11
•
Can be used for State of California
Title 24 high efficacy luminaire
compliance. Complies with Title 24
JA8-2016-E.
•
Can be used International Energy
Conservation Code (IECC) high
efficiency luminaire compliance.
•
ENERGY STAR® listed, reference
database for current listings
•
Lighting Facts labeled
•
FCC ID: 2AKCY-RL4BLE
•
IC Code: 4706A-RL4BLE
Warranty
Five year limited warranty, consult
website for details.
www.cooperlighting
.com
Type
Date
Halo Home
RL4
4-Inch All-Purpose
LED Retrofit Module
with Bluetooth Mesh
Connectivity
90 CRI
CCT Adjustable
Range from
2700K-5000K
FOR USE IN
INSULATED CEILING
AND NON-INSULATED
CEILING RATED HOUSINGS
HIGH-EFFICACY LED
WITH INTEGRAL
DRIVER - DIMMABLE
Dimensions
2.43”
[61.7mm]
Refer to ENERGY STAR® Certified Products List.
Can be used to comply with California Title 24
High Efficacy requirements.
Certified to California Appliance Efficiency
Database under JA8.
5.12”
ENERGY DATA
Input Voltage 120V
Input Current .069 A
Input Power 8 W
Inrush (A) 2.3 A
THD: ≤ 20%
PF: ≥ 0.90
T Ambient -40 - +40°C
Sound Rating ≤ 22.5dba
TD518300EN
February 19, 2018
Ordering Information
SAMPLE NUMBER: RL4069BLE40AWH
A complete luminaire consists of a housing, and LED module, order separately.
Models Lumens CRI/CCT Protocol Finish Accessories
RL4= 4” all- purpose
retrofit LED module
06=600 lumens
(nominal)
9=90 CRI minimum,
white tuning, select
CCT 2700K – 5000K,
in the mobile app
BLE40A =Bluetooth
Mesh wireless control,
4.0
WH=Matte white baffle RL4TRMWHB =4” White Paintable Trim Ring, Baffle
RL4TRMSNB =4” Satin Nickel Trim Ring, Baffle
RL4TRMTBZB =4” Tuscan Bronze Trim Ring, Baffle
RL4TRMWH =4” White Paintable Trim Ring
RL4TRMSN =4” Satin Nickel Trim Ring
RL4TRMTBZ =4” Tuscan Bronze Trim Ring
Housings
Halo Ultra-shallow LED Housings
H245ICAT=4" IC, airtight ultra-shallow new construction housing, LED, 120 - 277V
H245RICAT=4" IC, airtight ultra-shallow remodeler housing, LED, 120 - 277V
Halo LED Housings
H995ICAT=4" IC, airtight shallow new construction housing, LED, 120 - 277V
H995RICAT=4" IC, airtight shallow remodeler housing, LED, 120 - 277V
Halo Housings
H99TAT=4" non-IC, airtight shallow new construction housing, E26, 120V
H99RTAT=4" non-IC, airtight shallow remodeler housing, E26, 120V
H99ICAT=4" IC, airtight shallow new construction housing, E26, 120V
E4TATSB=4" non-IC, airtight shallow new construction housing, adjustable socket bracket, E26, 120V
E4RTATSB=4" non-IC, airtight shallow remodeler housing, adjustable socket bracket, E26, 120V
E4ICATSB=4" non-IC, airtight shallow new construction housing, adjustable socket bracket, E26, 120V
Photometric Data Lighting Facts
Halo Home RL4
RL4069BLE40AWH
Luminaire lumens 575
Input watts 7. 6
LER (LPW) 75.7
Spacing
Criteria
Beam angle (degrees) 93.1
Field angle (degrees) 141.1
Zonal lumen Lumens % Lumens
0-30
0-40 322
0-60 5 11
0-90 575
* Tested in accordance with IES LM63. Field results may vary.
0-180 1.18
90-270 1.18
Diagonal 1.26
203 35.3
56
88.8
100
Color Metric Summary*
f = 91.1
TM-30-15
CRI/CIE
R
g = 100.9
R
a = 93.1
R
9 = 64.9
R
CCT - Range of 2700K- 5000K
*factory default 3000K
RL4069BLE40AWH
93°
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
Loading...