Cooper Lighting Solutions PP-MT Installation Manual

ADE141890

INS #

Installation Instructions – Pendant Pipe Mount Layout - PP-MT
Instructions d’installation – Disposition du montage du luminaire
suspendu sur tuyau - PP-MT
Instrucciones de instalación: Disposición de montaje del tubo de
suspensión PP-MT

Installation Instructions – Pendant Pipe Mount Layout - PP-MT Installation Instructions – Pendant Pipe Mount Layout - PP-MT

WARNING

IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION

 Before starting any work ensure that all sources of power are turned OFF. . All work must meet local/national electrical

codes and be performed by a certified electrician.

 Follow product label information and instructions before installing fixture. Retain installation instructions for future

reference.

 Risk of fire, electrical shock, cuts and or other casualty hazards. This product must be installed in accordance with the

applicable installation code by a person familiar with the construction and operation of the product and the hazards
involved. Cooper Lighting Solutions assumes no responsibility for claims brought about by improper or careless
installation or handling of this product.

 Risk of burn. Disconnect power and allow fixture to cool before changing bulb or handling fixture.

 Replace lamp only with correct wattage and type of lamp marked on label. DO NOT exceed the maximum wattage listed

on the fixture label.

 To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or any sharp objects.

INSTRUCTIONS.

NOTICE

If supply wires are located within 3 inches of driver/ballast, use wire rated for at least 90°C (194°F).

v

Note: Not all option a

and dimension subject to change without notice.

ailable. Please consult your Cooper Lighting Solutions representative for availability. Specification

INSTALLATION

Run Length Fixture Breakdown

A Spacing

Power

4’

B Spacing

8’

C Spacing

12’

B Spacing 96” Spacing

16’

C Spacing

20’

C Spacing

24’

C Spacing

28’

C Spacing

32’

C Spacing

36’

96” Spacing

144” Spacing

96” Spacing 96” Spacing

144” Spacing

144” Spacing 144” Spacing

96” Spacing

Spacing Distance Fixture

A

Spacing Distance Fixture

B

Spacing Distance Fixture

C

46 7/8” Class A Perf/Class A DI

46 7/8” Class A Perf DI/Class A Indirect

45 5/8” Class A Full Perf

46 7/8” Iridium

45 5/8” RZL/Stellar

46 7/8” Minigator/Vertechs/Loft/Element

94 7/8” Class A Perf/Class A DI

94 7/8” Class A Perf DI/Class A Indirect

93 5/8” Class A Full Perf

94 7/8” Iridium

93 5/8” RZL/Stellar

94 7/8” Minigator/Vertechs/Loft/Element

142 7/8” Class A Perf/Class A DI

142 7/8” Class A Perf DI/Class A Indirect

141 5/8” Class A Full Perf

142 7/8” Iridium

141 5/8” RZL/Stellar

142 7/8” Minigator/Vertechs/Loft/Element

Figure 1.

Quantity of Fixture Length Per Continuous Runs

Continuous runs are made up using 8’ and 12’ fixture lengths as shown in the following table:

Fixture
Length

4’ 1

8’ 1 2 1 2 1 2 1 2 1

12’ 1 1 2 1 2 3 2 3 4 3 4

Fixture
Length

4’

8’ 2 1 2 1 2 1 2 1

12’ 5 4 5 6 5 6 7 6 7 8 7 8 9

4’ 8’ 12’ 16’ 20’ 24’ 28’ 32’ 36’ 40’ 44’ 48’ 52’ 56’

60’ 64’ 68’ 72’ 76’ 80’ 84’ 88’ 92’ 96’ 100’ 104’ 108’

Installation Instructions – Pendant Pipe Mount Layout - PP-MT

ADE141890 www.cooperlighting.com

Installation Instructions – Pendant Pipe Mount Layout - PP-MT

ADE141890 www.cooperlighting.com

32