Cooper Lighting Solutions OSW-D-010, VSW-D-010 User Manual
Project Catalog # Type
PIR Activated
Ultrasonic Activated
Self-Adjusting
1.732”
Prepared by Notes Date
Greengate
0-10V Dual Tech Sensor Dimmer
3-in-1 Solution that combines functionality
of a switchpack, a sensor and a 0-10V
dimmer into one wallbox device
OSW-D-010 / VSW-D-010
Typical Applications
Private Oces • Restrooms • Closets • Copy Rooms • Small enclosed spaces
Product Certication
Interactive Menu
• Order Information page 2
• Additional Resources page3
• Wiring Diagrams page 3
• Product Warranty
Part 15
Class A
Product Features
• Meets ASHRAE Standard 90.1 requirements
• Meets CEC Title 24 requirements
California
California
Title 20
Title 20
Compliant
Compliant
Top Product Features
• Compatible with dimmable 0-10V LED and FLR ballasts
• Dual Technology Passive Infrared and Ultrasonic sensor technology
• Fully adjustable Auto ON/Manual ON light level settings
• Provides 180 degree eld of view with 900 sq. ft. of major and 324 sq. ft. of minor motion coverage
• Selectable time delay of 15 seconds (Test mode), 5 minutes, 10 minutes, 15 minutes, 20 minutes (factory default),
30 minutes
Dimensional and Mounting Details Scale or Mounting Height
(44mm)
4.195”
(106.5mm)
58” / 1470mm
48” / 1210mm
additional
product diagrams
PS503244EN page 1
June 2020
Order Information
SAMPLE ORDER NUMBER: OSW-D-010-W
One single gang wallplate included
Catalog Number
Catalog Number Description
OSW-D-010-* (*-W, V, LA, G, B, R)
VSW-D-010-* (*-W, V, LA, G, B, R)
Note
Not all colors are available in stock and some color options may have extended lead times.
0-10V Dual Tech Sensor Dimmer -
Occupancy with LED Single pole/3-Way preset
0-10V Dual Tech Sensor Dimmer -
Vacancy with LED Single pole/3-Way preset
Compatible
Lamp Types
0-10VDC
LED/FLR
0-10VDC
LED/FLR
Product Specications
Key Features
• Compatible with dimmable 0-10V LED and FLR ballasts
• Fully adjustable Auto ON/Manual ON light level settings
• Adjustable high-end and low-end trim setting
• Push pad design provides minimal travel and crisp actuation
• Digital circuitry provides aesthetically pleasing soft ON/fade OFF
• No leakage to load in OFF mode
• Integrated photocell for daylighting
• Zero crossing for long relay life
Technology
• 0-10V Dual Tech Sensor Dimmer
• Dual Technology Passive Infrared and Ultrasonic sensor technology
Mechanical
Mounting Plate/Strap Dimensions: 4.19” H x 1.73” W (106.55mm x 44mm)
Product Housing Dimensions: 2.7” H x 1.73” W x 2.19”D
(68.5mm x 43.9mm x 55.62mm)
Environment:
• Operating temperature: 32°F to 104°F (0°C to 40°C)
• Relative humidity operating: 20% to 90% non-condensing
• For indoor use only
Housing: Durable, polycarbonate decorator housing with gloss nish
Mounting: Fits in a standard 3.5” deep back box
Electrical
• Neutral is required for installation of device
Wiring type:
• Single pole and 3-way
• 8” pre-stripped wire leads,
• #16 AWG for Load and GND wires
• #18 AWG for all other wires
Electrical ratings: 8A 120/277VAC @ 60Hz (LED)
Light Intensity Control: Full-range, continuously variable dimming
Class 2 dimming output section: 0-10 VDC, 80mA maximum current sink.
0-10V output supports up to 40 ballasts/ drivers that draw the standard 2mA each
Surge Protection: Meets ANSI/IEEE Std. C62.41, tested to withstand voltage
surges up to 6000V and current surges of up to 3000A
Radio Frequency Interference: Designed to reduce interference with radio,
audio and video equipment 0-10VDC FLR and LED ballasts
Voltage Ratings: Permanently marked on device label
Flammability: Meets UL 94 requirements; V2 rated
0-10V Dual Tech Sensor Dimmer
Ratings
Watt
960
2200
960
2200
Hardware Specifications
Status Indicators: LED Indicators to indicate motion
LED indicators
• Red LED = PIR detection
• Green LED = Ultrasonic detection
Controls and Performance
Selectable Time delays:
• 15 seconds (Test mode)
• 5 minutes, 10 minutes, 15 minutes, 20 minutes (factory default), 30 minutes
Coverage:
• Provides 180 degree eld of view with 900 sq. ft. of major and 324 sq. ft. of
minor motion coverage
Occupancy Sensor:
• Occupancy Sensor version allows operations to toggle between
Auto ON/Auto OFF or Manual ON/Auto OFF mode
• Occupancy Sensor version provides a selectable ambient light override
preventing lights from switching ON when there is acceptable natural light
Dimming control:
• Full-range preset dimming control provided with horizontal dim/bright bar
Standards/Ratings
• cULus Listed to UL1472, le no. E325082
• FCC Part 15 Class A
• Meets ASHRAE Standard 90.1 requirements
• Meets CEC Title 24 requirements
• California Title 20 Compliant
Warranty
Five year warranty standard
Ratings
V/AC
120
277
120
277
Color
W=White, V=Ivory, LV=Light Almond, G=Gray, B=Black, R=Red
W=White, V=Ivory, LV=Light Almond, G=Gray, B=Black, R=Red
PS503244EN page 2
June 2020
Loading...