Cooper Lighting Solutions MWS User Manual

STARTER FITTINGSTARTER CABLE

[19mm]

Project Catalog # Type

Prepared by Notes Date

MWS

ST

Starter Fitting
Starter Cable

Typical Applications

Oce • Education • Healthcare • Hospitality • Retail • Industrial

• Manufacturing • Sports Venues

Interactive Menu

Product Certication

• Order Information page 2

• Product Specications page 2

• System View page 2

• Product Warranty

Top Product Features

• UL Listed under Standard 183 for make or break under load

• Meets requirements of Article 604 of the National Electrical Code

• Rated at 20 amperes with full-size ground wire

• Copper conductors with THHN insulation rated at 90°C

• Galvanized steel exterior with integral keying for voltage

Dimensional and Mounting Details

Front

Front

4-3/8"

Top

3/4"

Side

[112mm]

3/4"

[19mm]

Top

Side

4-3/8"

[112mm]

additional
product diagrams

PS519291EN page 1

November 21, 2019 4:00 PM

ST

Cooper Lighting Solutions

1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800

www.cooperlighting.com

© 2020 Cooper Lighting Solutions
All

Rights Reserved.

Specifications and dimensions
subject to change without notice.

Unit with no cable

are fed from the panel to a junction box with conduit and

Order Information

SAMPLE ORDER NUMBER: 27ST12/2G

Voltage

Voltage Component Conductors and Size Cable Length (Feet) Options

12=120V
20=208V
24=240V
27=277V
34=347V
48=480V

Component Conductors and Size Cable Length (Feet) Options

ST=Starter 10/2G=#10, 2 Conductors Plus Ground

Product Specications

• UL Listed under Standard 183 for make or break
under load.

• MWS components assembled with 12 AWG/10
AWG conductors rated at 20 amperes with full size
ground wire.

• Copper conductors are THHN insulated wire rated
90°C.

• Galvanized steel exterior with integral keying for
voltage and amperage.

• Unique double-blade contact ensures proper mating
of electrical components to prevent pushback or
pullout.

• Includes threaded locknut connector and 6” pre-

stripped leads on tting ends or at the end of
specied cable length.

• All unused outlets require a MWS dust cover. MWS
ST, SP, SD, CT and TC are shipped with one dust
cover attached.feature bullet

System View (not to scale)

10/3G=#10, 3 Conductors Plus Ground
10/4G=#10, 4 Conductors Plus Ground
12/2G=#12, 2 Conductors Plus Ground
12/3G=#12, 3 Conductors Plus Ground
12/4G=#12, 4 Conductors Plus Ground

09=9'
15=15'
21=21'
[Blank]=No Cable

2N=2 Neutral

(1) 12/4G and 10/4G only.

(1)

Notes

Unit with cable

Starter Fixture Cable Extender or Fixture Cable

Starter Cable

Fixture Cable

Extender or Fixture Cable

Shipping Data

Standard

Cable

Lengths Unit Wt.

0' .7 lbs. 60

9' 3.0 lbs. 9

15' 4.5 lbs. 6

21' 6.3 lbs. 4

Starter (ST)

Converts conventional wiring to MWS. Branch circuits

wire. The Starter is mounted to the junction box with a
1/2" threaded lock nut connector. Circuits are then
connected to the appropriate leads of the Starter.

Starter Cables have 9', 15' or 21' of MC cable.

Consult MWS Installation, Application and Specification
Manual for additional
comprehensive system information.

MWS Autocad Drafting

Please reach out to your local representative
for MWS layout design assistance.

Standard

Qty./Carton

All electrical boxes, conduit, connections
and switches by others.

Install dust covers on unused open ends.

Scale is exaggerated on xtures and MWS

system applications.

PS519291EN page 2

November 21, 2019 4:00 PM