Cooper Lighting Solutions LDSSQ6 User Manual

Project Catalog # Type

Prepared by Notes Date

LDSSQ6 | EU6B | 6LBCSSQ

6” square, new construction
shallow downlight

Typical Applications

Oce • Education • Healthcare • Hospitality • Retail •

Code-Compliance Areas • Sports Venues

Interactive Menu

• Order Information page 2

• Product Specications page 3

• Energy Data page 4

• Photometric Data page 4

• Connected System page 5

• Product Warranty

Top Product Features

• 500, 1000, 1500, 2000, 3000 lumens

• 2400K, 2700K, 3000K, 3500K, 4000K, 5000K color temperature

• For standard or shallow plenum heights

• Dim-to-warm technology

• Tuneable white technology

Dimensional and Mounting Details

Product Certication

Product Features

14.14"

[359mm]

BB

13.08"

[332mm]

6"

[152mm]

7.16"

[182mm]

3.5"

[89mm]

PS520014EN page 1

April 16, 2021 2:12 PM

Order Information

SAMPLE ORDER NUMBER: LDSSQ6B10D010-EU6B102027-6LBCSSQ1MW

LDSSQ6 | EU6B | 6LBCSSQ

Housing

Housing Lumen

LDSSQ6B = 6” square

downlight 6” nominal aperture
LDSSQ6BCP = 6” square
downlight 6” nominal aperture,
Chicago Plenum

Notes Notes Notes

Power Module

Power Module Lumen

EU6B = 6” Universal LED Module 1020 = 1000, 1500, 2000 Lumens

Lumens Driver

(1)

05= 500 Lumens
10 = 1000 Lumens
15 = 1500 Lumens
20 = 2000 Lumens
30 = 3000 Lumens

(1) Nominal lumens
will vary depending on
selected color, driver

and reector nish.

(10) Limited to D010
drivers

(10)

D010 = 0-10V Dimming, 1% to 100%, 120V-277V
D010TR = 0-10V or Line Voltage Dimming, 5% to 100%, 120V-277V
DE010 = 0-10V Linear Dimming, 0% to 100%, 120V-277V
D5LT = Fifth Light® DALI DT6 Logarithmic Dimming, 0% to 100%, 120V-277V
DMX = DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V
DMXC5=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, with RJ45 connection
DL2 = Lutron® Hi-Lume Forward Phase Dimming, 1% to 100%, 120V Only
DLE = Lutron Ecosystem dimming 1% to 100%, 120V-277V
DLV = Low voltage dimming driver (1-100%) for use with DLVP system

(2) Non-IC

(3) Not available with Chicago Plenum.
(6) DMX xtures default to full on upon loss of DMX signal.

Lumen CRI / CCT

(1)

3040 = 3000 Lumens

Notes Notes Notes

(1) Nominal lumens will vary depending on

selected color, driver and reector nish.

80 CRI

27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
50 = 5000K

Dim 2 Warm

109030D2W = 1000 lumen, 90 CRI, Dim 2 Warm, IC rated
159030D2W = 1500 lumen, 90 CRI, Dim 2 Warm, IC rated
209030D2W = 2000 lumen, 90 CRI, Dim 2 Warm
309030D2W = 1000 lumen, 90 CRI, Dim 2 Warm

Driver

Tunable white 1000-2000 Lumens

1DE010W2N2050 = 0-10V dimming, 0% to 100%, 120V, 2000K - 5000K
1DE010W2N2765 = 0-10V dimming, 0% to 100%, 120V, 2700K - 6500K

(6)

(3)

1D5LTW2N2050 = Fifth Light DALI DT6 Logarithmic Dimming, 0% to
100%, 120V, 2000K - 5000K
1D5LTW2N2765 = Fifth Light DALI DT6 Logarithmic Dimming, 0% to
100%, 120V, 2700K - 6500K

2DE010W2N2050 = 0-10V dimming, 0% to 100%, 277V, 2000K - 6500K
2DE010W2N2765 = 0-10V dimming, 0% to 100%, 277V, 2700K - 6500K
2D5LTW2N2050 = Fifth Light DALI DT6 Logarithmic Dimming, 0% to

100%, 277V, 2000K - 5000K
2D5LTW2N2765 = Fifth Light DALI DT6 Logarithmic Dimming, 0% to
100%, 277V, 2700K - 6500K

(2)

CRI / CCT

90 CRI

24 = 2400K
27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
50 = 5000K

Tunable White

1020W2N902050 = 1000, 1500, 2000 lumens,
90 CRI, tunable white 2000K-5000K
1020W2N902650 = 1000, 1500, 2000 lumens,
90 CRI, tunable white 2700K-6500K

97 CRI

27 = 2700K
30 = 3000K

Reector

Flange Finish

Reector Flange Finish

6LBCSSQ = 6” Shallow wide beam die cast
6LBPSSQ = 6” Shallow non-conductive, injection molded white (self anged white only)

1 = Self-anged (nish is the same as the reector)
2 = White painted self- anged
3 = Flangeless for use with plaster lathing ring

Notes Notes Notes

Accessories

Accessories

LGSKT6SQIP66 = IP66 Gasket Kit
PRSQ6 = Rimless Plaster Ring for Flush Mount (order reector with angeless reector)

Bar Hangers

HB26 = C-channel Bar Hanger, 26” Long, Pair
HB50 = C-channel Bar Hanger, 50” Long, Pair
RMB22 = Wood Joist Bar Hanger, 22” Long, Pair

(7) Refer to system specications for additional information, features, and benets. Order either factory installed option or accessory.
(8) WTA = WaveLinx wireless sensor kit for daylight dimming, PIR motion sensing, and optional RLTS - Real Time Location Services, use with 0-10V only.
(9) WTK = WaveLinx Lite tile mount sensor kit for daylight dimming, PIR motion sensing, use with D010 only (Refer to WaveLinx Lite system specications)

Notes

Connected Lighting Systems

WTA = Field installed WaveLinx sensor Kit

WTK = Field installed WaveLinx Lite Sensor Kit

Die Cast reectors

MW = Matte White
MB = Matte Black
MMS = Matte Metallic Silver

(7)

(8)

(9)

PS520014EN page 2

April 16, 2021 2:12 PM

Product Specications

Lower Shielding Reflector

• Painted die cast aluminum or non-conductive

injection molded lower reector with a lensed upper

optical chamber providing superior lumen output
with minimal source brightness

• Reector is retained with two torsion springs

holding the ange tight to the nished ceiling

surface

• Plaster lathing ring accessory offered for ush

reector transition

Plaster Frame

• Galvanized steel plaster frame s for up to 1-1/4”
thick ceilings

Junction box

• Listed for (8) #12 AWG (four in, four out) 90°C
conductors and feed thru branch wiring

• (4) 1/2” and (2) 3/4” trade size pry outs positioned
to allow straight conduit runs

Thermal

• Aluminum heat sink conducts heat away from the
LED module for optimal performance and long life

LED

• Chip on board with a multitude of highly ecient
white LED’s, combined with a high reectance upper
reector and convex transitional lens produce even
distribution with no pixilation

• Lumen output shall not decrease by more than
10% over the minimum life of 55,000 hours
(L90 > 55,000 hours)

• Auto resetting, thermally protected, LED’s are turned

off when safe operating temperatures are exceeded

• Color variation within 2-step MacAdam ellipses

• Flexible disconnect allows for tool-less replacement
of LED engine from below ceiling

• Available in 80, 90 or 97 CRI

• D2W™ – dim-to-warm shifts CCT from 3000K

to 1850K as xture dims mimicking halogen

sources.

• W2N - Tunable white CCT range 2700K to 6500K

or 2000K to 5000K, 90 CRI. Standard (requires

above ceiling access)

Driver

• 120-277V 0-10V dimming driver provides icker free
dimming from 100% to 1%

• Optional 120V leading edge, <1% 0-10V, Fifth Light,
DMX or Lutron

• W2N, DMX, DE010, and D5LT require above ceiling
access and all other drivers can be accessed from
above or through the aperture

• Distributed low voltage power system combines
power, lighting, and controls with ease of
installation.

®

Ecosystem

Connected Lighting System Options

Two WaveLinx connected systems to choose
from. Refer to WaveLinx system specications and

application guides for details.

WaveLinx Wireless System Tilemount Sensor Kit

• WaveLinx Wireless WTA tile mount sensor kit offers
daylight dimming, PIR motion sensing, scene and
zone conguration, automatic commissioning;
and optional RLTS - Real Time Location Services

available.

WaveLinx Lite System Tilemount Sensor Kit

• WaveLinx Lite WTK tile mount sensor kit offers
daylight dimming and PIR motion sensing, scene
and grouping conguration.

LDSSQ6 | EU6B | 6LBCSSQ

WaveLinx Tilemount Kits Application

• The WTA and WTK tilemount kits include a control

module mounted on the luminaire junction box via

1/2” knock-out, and a tilemount sensor on 54-inch

whip; for ceiling installation by direct-mount spring

clips or via mounting bracket in octagon ceiling

boxes.

• The WTA and WTK tilemount kits may be ordered
as factory installed on the luminaire, or ordered

separately as a eld installed accessory kit.

Code Compliance

• Thermally protected and cULus listed for protected
wet locations

• IP66 rated when used with IP66 gasket kit
accessory

• Optional City of Chicago environmental air (CCEA)
marking for plenum applications

• EMI/RFI emissions per FCC 47CFR Part 18 Class B
consumer limits

• IC rated up to 1500 lumens

• 2000 lumen and above are non-IC rated - insulation
must be kept 3” from top and sides of housing

• RoHS Compliant

• Photometric testing completed in accordance with
IES LM 79 and TM-30 standards

• Lumen maintenance projections in accordance with
IES LM-80-08 and TM-21-11

Warranty

• Five year warranty

PS520014EN page 3

April 16, 2021 2:12 PM

180°

Energy and Performance Data

Energy Data

Sound Rating: Class A standards

(Values at non-dimming line voltage)

Minimum Starting Temperature: -30°C (-22°F)

EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)

Input Voltage: UNV (120V - 277V)

Power Factor: >0.90

(at nominal input 120-277 VAC & 100% of Rated Output Power)

Input Frequency: 50/60Hz

1000 Lumen D010

Input power: 11W THD: <14%

120V input current: 0.09A 277V Input Current: 0.04A

1500 Lumen D010

Input power: 15.5W THD: <13%

120V input current: 0.13A 277V Input Current: 0.06A

2000 Lumen D010

Input power: 21.2W THD: <9%

120V input current: 0.18A 277V Input Current: 0.08A

3000 Lumen D010

Input power: 27.6W THD: <10%

120V input current: 0.23A 277V Input Current: 0.10A

120V 277V

Lumens Inrush (A) Duration (ms) Inrush (A) Duration (ms)

1000 Lumen D010 1.02 0.041 2.18 0.021

1500 Lumen D010 1.02 0.042 2.24 0.064

2000 Lumen D010 1.02 0.077 2.43 0.027

3000 Lumen D010 1.15 0.067 3.26 0.027

LDSSQ6 | EU6B | 6LBCSSQ

Photometric Data

681

511

341

170

0

170°

10°

0°

160°

Test Report: P35359

150°

140°

40°

30°

20°

Housing: LDSQ6B15D010
Module: EU6B10208035

130°

120°

Trim: 6LBCSSQ1MMS

110°

Lumens: 1636.9

100°

Input Watts: 14W

90°

Ecacy: 116.9 Lm/W

80°

70°

60°

50°

View IES files

0-deg 45-deg 90-deg

PS520014EN page 4

April 16, 2021 2:12 PM

Connected Systems

WaveLinx Lite

Integrated Ambient

WaveLinx Lite

Tilemount Sensor Kit

WaveLinx Lite

Integrated Parking Garage

WaveLinx Lite

Wallstation

WaveLinx Lite

Mobile Application

Building LAN

Wireless Area

Controller

Touchscreen

WaveLinx Mobile App
used for system
setup and
personal control

PoE

Power

Trellix Core

BACnet/IP
Public (REST) API

Third Party system

(hardware provided

by others)

BACnet Router1

(hardware provided
by others)

Desktop/Laptop
with web browser

(hardware provided
by user)

Control

LDSSQ6 | EU6B | 6LBCSSQ

WaveLinx Lite - WTK Tilemount Sensor

• Intuitive Android™ or Apple® iOS® app for basic system code compliant set up and conguration via Bluetooth

• Up to 28 unique areas per project site (WaveLinx Lite Bluetooth network)

• Up to 50 devices for an area, any one of 16 control zones, up to 6 occupancy sets, and custom lighting scenes

• Automatic occupancy or vacancy, sensor sensitivity, daylight dimming, etc. congurable through the app

• Refer to the WaveLinx system specications for details

Device

Security

Manual
Dimmer

Occupancy

Sensor

Daylighting

Control

Manually Switched

ON/OFF

Tuning

Lumen Maintenance

Control

Scenes

WaveLinx Lite WTK Tilemount Wiring Diagram WaveLinx Lite Bluetooth Enabled System

120-277

VAC

Black (Hot)

White (Neutral)

Includes switchleg (Blue load out wire)

and 0-10V to each fixture controlled

120-277 VAC 3A downlights with 0-10V control

Control module

(MSP3IVMVDC1EP)

Gray (Dimming)

Purple (Dimming)

Blue (Not Switched)

White (Neutral)

WaveLinx Lite

Tilemount Sensor Kit control module

(MSP3IVMVDC1EP)

(included)

0-10V

DImming Driver

54” Plenum cable
(5140-000123-00)

(included)

WaveLinx Lite Sensor and

Mounting Trim (included)

ceiling tileceiling tile

WaveLinx Wireless – WTA Tilemount Sensor

• WaveLinx Wireless functionality congures zones and customizes settings from one secure mobile app

• Automatic code commissioning that meets the strictest codes

• Fixtures and sensors integrate with Wireless Area Controller, Wall Stations, and Control Devices

• Stand-Alone Oces or Entire Building Network Installations

Downlights with

tilemount sensor

wireless communication

Highly efficient LED fixtures

120-277

VAC

120-277 VAC 3A downlights with 0-10V control

+ + +

Wireless Area

Provides centralized

coordination of multiple

area control options

Black (Hot)

White (Neutral)

Includes switchleg (Blue load out wire)

and 0-10V to each fixture controlled

Control module

(MSP3IVMVDC1EP)

Controller

Gray (Dimming)

Purple (Dimming)

Blue (Not Switched)

White (Neutral)

Tilemount Sensor Kit control module

Wireless Wall

Station/Receptacle

Provides customized

wireless control of each area

DImming Driver

WaveLinx Lite

(MSP3IVMVDC1EP)

(included)

WaveLinx Sensor and

Mounting Trim (included)

Cooper Lighting Solutions

1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com

0-10V

54” Plenum cable
(5140-000123-00)

(included)

ceiling tileceiling tile

Mobile

Applications

Provides personalized, local

control from a tablet or

smartphone

WaveLinx Wireless Trellix Building Management IntegrationWaveLinx Lite WTA Tilemount Wiring Diagram

© 2020 Cooper Lighting Solutions
All Rights Reserved.

Specifications and dimensions
subject to change without notice.

Control

WaveLinx mobile app settings

Manual
Dimmer

Tuning
Control

Occupancy

Sensor

SchedulingReceptacle

Lumen Maintenance

Control

Daylighting

Control

Manually Switched

ON/OFF

PS520014EN page 5

April 16, 2021 2:12 PM

Demand

Response