Cooper Lighting Solutions GR LED User Manual

Project Catalog # Type

23-3/4" [603mm]

[83mm]

Ceiling Trim

G

G

G

GR

Flat, Whit
Steel
Aluminum

GRFA

Flat, Extruded
White Aluminum

GRRA

Deep, Regressed,
Extruded Natural

Prepared by Notes Date

GR LED

General Recessed LED Troffer w/
Prismatic Lens

Typical Applications

Oce • Education • Healthcare • Retail • Residential

Interactive Menu

Product Certication

• Order Information page 2

• Product Warranty

Product Features

Top Product Features

• Replaces 2 or 3-lamp T8 uorescent lamps (64-96W equivalent)

• Traditional prismatic A12 lens and door assembly

• Low prole, IC Rated recessed form factor ts most T-grid systems

• Easy to install; Below the ceiling maintenance

• Available in 2x2 and 2x4 sizes

Dimensional and Mounting Details Door Frame

e

3-1/4"

Ceiling Compatibility

Grid/Lay-in
Standard

Concealed T

Slot Grid

Type Type

Exposed Grid G
Concealed TG
Slot Grid G

(Verify compatibility/ consult
factory.)

PS502111EN page 1

December 4, 2019 8:34 AM

GRLED

Cooper Lighting Solutions

1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800

© 2020 Cooper Lighting Solutions
All

Rights Reserved.

Specifications and dimensions
subject to change without notice.

[603mm

23-3/4" [603mm]

[603mm]

47-15/16" [1218mm]

19-7/8"

Mounting Data

2x2 2x4

[505mm] (KO)

23-3/4"

]

Product Information

Catalog Number Size (in) Lumen Watts Ecacy (lm/W) UPC CCT Unit Weight Pallet Qty

22GRLD2440R1 23.8 x 23.8 x 3.25 2400 19 130 080083826179 4000K 13 48

24GRLED5040RT-120V 23.8 x 47.8 x 3.25 5000 45 111 080083826186 4000K 27 28

22GRLED1322X2RT 23.8 x 23.8 x 3.25 3274 29 117 080083724604 3500K 13 48

24GRLED1382X4RT 23.8 x 47.8 x 3.25 3884 29 134 080083699674 3500K 27 28

Accessories

• EQ-Clip-U = T-BAR Safety Earthquake Clips (Recommended for all 9/16” T-grid ceilings)

• DF-22-W = 2’ x 2’ Drywall Frame Kit

• DF-24-W = 2’ x 4’ Drywall Frame Kit

• EBPLED7W = User Installed, Remote Mount, 7 Watt LED Emergency Battery Pack

• EBPLED14W = User Installed, Remote Mount, 14 Watt LED Emergency Battery Pack

23-3/4"

Product Specications

Construction

• Rigid housing is die formed of code gauge prime
cold rolled steel

• Unibody endplates are securely attached with
interlocking tabs and screws

• Full length die-formed stiffeners provide added
strength

• Recessed lay-in installation. Fits standard T-grid
systems

Mounting

• Integral grid locking clips for added safety

• Auxiliary xture end suspension points provided

when added retention is required

• Multiple trade size KOs available for installation
exibility

• Fixture is less than 3.75” high for use in low ceiling
spaces

• Surface mounting kits available

Electrical

• 120V FCC Class A electronic non-dimming driver
(R and RT-120V models only)

• RT model driver specs are 120-277V (UNV) with
0-10V dimming to 10%

• 0-10V dimming uses low-voltage grey and purple
wire leads

LED and Light Engine

• 3500K or 4000K CCT with minimum 80 CRI

• L82 at 60,000 rated life-hours (TM-21), or up to 24

years at 6 hrs/day.

• LED modules comply with IESNA LM-79 and LM-80
standards

Door Frame / Optical Shielding

• Die formed, at steel door frame with spring loaded
latch

• #12 pattern acrylic prismatic lens provides
traditional uorescent look

• Lens thickness – 0.095” nominal

Compliance and Certifications

• cULus listed for damp location in 25°C ambient
environments

• IC rated for direct insulation contact

• RoHS compliant

• DesignLights Consortium Qualied, refer to www.

designlights.org for details (RT models only)

Product Warranty

• 5-year warranty

www.cooperlighting.com

PS502111EN page 2

December 4, 2019 8:34 AM