Cooper Lighting Solutions Encounter 22EN LED User Manual

Project Catalog # Type

23-3/4" [603mm]

[83mm]

[603mm]

23-11 /16" [602mm]

X=2-7/1

X

[64mm]

G

F

Ceiling Trim

G or T

Prepared by Notes Date

Encounter 22EN LED

2' x 2' Troffer LED Module

Specication Grade Troffer

Typical Applications

• Commercial Oce Spaces • Schools • Hospitals • Retail

• Other Indoor Ambient Applications

Product Certication

Interactive Menu

• Order Information page 2

• Photometric Data page 3

• Control Solutions page 4

• Connected Systems page 4

• Product Warranty

Product Features

40

Top Product Features

• Available in 1' x 2', 1' x 4', 2' x 2' and 2' x 4' recessed versions

• Leverages our patented WaveStream Technology with AccuAim™ optics

• Four CCT options: 3000K, 3500K, 4000K, and 5000K at 80CRI or 90 CRI

• White tuning solutions available, either 3000K - 5000K or 2700K - 6500K

• Ecacy up to 143 lumens per watt

Dimensional and Mounting Details

3-1/4"

Ceiling Compatibility

Grid/Lay-in
Standard

23-3/4"

Notes:

*See Drywall Frame Kit Accessory in Ordering Information section.
**Fixture construction is suitable for use in Air-handling and plenum rated spaces in accordance with Section

300.22 (C) of the National Electrical Code, Section 4.3.11.2.6.5 of NFPA 90A and Section 602.2.1.4 of ICC.

3-1/4"

[83mm]

6"
[62mm]
Y=2-1/2"

9/16" or 15/16"
Slot Grid

Y

22-15/16" [583mm]

23-3/4" [603mm]

Drywall Frame
Kit

Type Type

Exposed Grid G
Concealed TG or T
Slot Grid G or T
Flange *

PS519326EN page 1

April 6, 2021 2:56 PM

Order Information

SAMPLE ORDER NUMBER: 22EN-LD2-34-UNV-L835-CD1-SVPD1-U

Rating Series Air Lamp Type Lumen Outputs Voltage

Rating Series

[Blank]=Standard
ATW-SW4= Chicago

(1)

Rated

Notes Notes Notes Notes Notes

(1) Chicago rated
version does not allow
for row mounting.

22EN=2' x 2' Encounter Series [Blank]=Standard

(2) DesignLights Consortium® Qualified

and classified for both DLC Standard

and DLC Premium, refer to www.
designlights.org for details.

(2)

Air Lamp Type Lumen Outputs Voltage

A=Air (Vented)

(3) Air version is vented but
does not meet air handling
requirements.

(3)

LD2=LED 2.0 Stock

25=2500 Lumens
34=3400 Lumens

MTO
19=1900 Lumens
30=3000 Lumens
39=3900 Lumens
43=4300 Lumens

(4) 1900, 2500, 3000 and 3400 lumen option are not available with a
Fifth Light DALI (5LTD) driver. (5) Step-dim driver not available with
1900, 2500, 3000 and 3400 lumen option. (6) Not compatible with WN
driver. (7) White tuning not available with 1900 lumen option.

(4), (5), (6)

(4), (5)

(4), (5), (6), (7)

(4), (5)

UNV=Universal Voltage 120-277
347V=347 Volt
48V=48 Volt Low-voltage (Class 2)
120V=120 Volt
277V=277 Volt

(8) Products also available in non-US voltages and frequencies for
international markets. (9) 347V emergency option not available.
(10) Must specify voltage as 120V or 277V when ordering GTR2
option. (C) Consult WaveLinx Low-Voltage or DLVP system pages
for additional details and compatibility.

22EN LED

(9)

(10)

(10)

(8)

(C)

Emergency Options

CCT Flex Driver Type

Emergency Options CCT Flex Driver Type

EL7W=7-watt, 120V-277V emergency
battery pack installed
EL14W=14-watt 120V-277V emergency
battery pack installed
ELV7W=Low-voltage system, 7-watt
emergency battery pack
ELV14W=Low-voltage system, 14-watt
emergency battery pack
GTR2=Bodine Generator Transfer Relay

(12), (13)

ETRD=Iota Emergency Transfer Relay with
dimming control

(11) With integral test switch/indicator/laser
test. For approximate delivered lumens multiply

the lumens per watt of the desired fixture by the

wattage of the emergency battery pack (100 lm/W x
7=700 lumens). IES-format photometry for luminaire
under emergency operation available. (12) Used to
bypass local control during outage. Must be used
in conjunction with UL 1008 device (provided by

others). GTR2 option includes 2 relays on fixtures

with dimming drivers. ETRD option only requires one

relay when used on a dimming fixture. (13) Must

specify voltage as 120V or 277V when ordering
GTR2 option. (C) Consult WaveLinx Low-Voltage
or DLVP system pages for additional details and
compatibility.

(11)

(11)

(C)

(C)

(12)

Notes Notes Flexible Metal Conduit Options Notes

L830=3000K
L835=3500K
L840=4000K
L850=5000K
L930=3000K
L935=3500K
L940=4000K
L950=5000K
L83050=80CRI 3000K-5000K White Tuning
L93050=90CRI 3000K-5000K White Tuning
L82765=80CRI 2700K-6500K White Tuning
L92765=90CRI 2700K-6500K White Tuning

(14) White tuning provides correlated color
temperatures (CCT) between 3000K (warm) to 5000K
(cool) or 2700K (warm) to 6500K (cool). Must be used
in conjunction with W2A driver only. Must be used
with two (2) 10V dimming control channels, 1 color,
1 intensity.

A3/8-4/18GDIM=3/8" Flex with 0-10V Dimming Leads

Multiple other configurations available. See below for details.

A3/8-5/18GDIM=Flex with 0-10V Dimming leads and Blue for
alternate wiring. See below for details.

(14)

(14)

(14)

(14)

Flex options available for 0-10V dimming control, DALI dimming control,
emergency and night light functions. 72-inch factory-installed and pre-

wired to driver, fitted to luminaire housing access plate with 90° enclosed

FMC connector. Not all options may be combined and installation ratings
vary by type.
A3/8-4/18GDIM series notes: Factory installed dimming option 3/8"

flexible metal conduit with 2-#18 power and ground wires and 2-#18 UL-

listed jacketed 0-10V +/- control wires. Meets UL 66, 83, 1479, 1569, 1581,

2556. NEC® 250.118, 300.22(C), 392, 396, 330, 501, 502, 503, 530, 504,

505, 518, 520, 530, 645, 72; Federal Specification A-A-59544 (formerly J-C­30B); all applicable OSHA and HUD Requirements. UL Classified 1-, 2-, and
3-hour through penetration with applicable fire stop product (not included).
May be surface mounted, fished and/or embedded in plaster. Cable tray

and approved raceway rated, install per NEC®; Environmental Air-Handling
Space Installation per NEC® 300.22(C).

CD=0-10V Dimming Driver (1%-100% Dimming)
WN=WaveLinx Wireless Fixture, No Sensor.
5LTD=Fifth Light DALI Driver (10%-100% Dimming)
5LTHD=Fifth Light Dimming Driver (1%-100% Dimming)
LV=Low-voltage System Dimming Driver (0%-100% Dimming)
SD=Step Dimming Driver (50% or 100% Dimming)
LH=Lutron HiLume (LDE1 series) 1%-100% EcoSystem Driver

with Soft-on Fade to Black dimming

L5=Lutron 5 Series (LDE5-Series) 5%-100% EcoSystem Driver
W2A=White Tuning, 2ch, Intensity and CCT Control
SR=Sensor-ready Dimming Driver (1%-100% Dimming)

(15) 1900, 2500, 3000 and 3400 lumen option are not available with a
Fifth Light DALI (5LTD) driver. (16) Step-dim driver not available with 1900,
2500, 3000 and 3400 lumen option. (17) White tuning provides correlated
color temperatures (CCT) between 3000K (warm) to 5000K (cool) or 2700K
(warm) to 6500K (cool). Must be used in conjunction with W2A driver
only. Must be used with two (2) 10V dimming control channels, 1 color,
1 intensity.

Integrated options must be used in conjunction with the associated system
and may not be compatible with other options or accessories. Please refer
to the following: (A) Consult WaveLinx system pages for additional details
and compatibility. (C) Consult WaveLinx Low-Voltage or DLVP system pages
for additional details and compatibility. (E) Consult Fifth Light system pages
for additional details and compatibility. (F) Consult Marketplace Options

- Lutron system pages for additional details and compatibility. Compatible
only with driver series shown, and may require two or more drivers. Requires

field commissioning to operate or dim. Contact Lutron at www.lutron.

com. (G) Not compatible with GTR, ETRD, or integrated sensor options. (H)
Available with UNV voltage only.

Number of Drivers Integrated Sensing Systems Packaging Accessories

(A), (G), (H)

(15), (E)

(E)

(C)

(16)

(F)

(F)

(17)

Number of Drivers Integrated Sensing Systems Packaging Accessories (order separately)

1=1 Driver [Blank]=No Sensor

WAA=WaveLinx Wireless Integrated Sensor
WAB=WaveLinx Lite Wireless Integrated Sensor
WLA=Low-voltage Integrated Sensor
SVPD1=0-10V Stand-alone Integrated Sensor

(18) WAA sensor to be used with CD or W2A driver. (19) WAB and SVPD1 sensor to be used with CD driver. (20)
WLA sensor to be used with LV driver.

Integrated options must be used in conjunction with the associated system and may not be compatible with other
options or accessories. Please refer to the following: (A) Consult WaveLinx system pages for additional details and
compatibility. (B) WaveLinx Lite devices are not currently compatible with the WaveLinx Wireless Area Controller.
Consult WaveLinx Lite system pages for additional details and compatibility. (C) Consult WaveLinx Low-Voltage or
DLVP system pages for additional details and compatibility. (D) Consult SVPD series system pages for additional
details and compatibility.

(20), (C)

(18), (A)

(19), (D)

(19), (B)

Notes Notes

U=Unit Pack
PAL C=Job Pack,

in carton

T3A END E.Q. BRACKET PARTS BAG (Standard with fixture)
DF-22W-U=2' x 2' Drywall Frame Kit
SK-22-WS=2' x 2' Shallow Surface Mount Kit
SK-22-WT=2' x 2' Tall Surface Mount Kit
ISHH-01=Programming Remote for Integrated Sensor
ISHH-02=Personal Control Remote for Integrated Sensor

Integrated options must be used in conjunction with the associated system and may not
be compatible with other options or accessories. Please refer to the following: (D) For
use with SVPD sensor only. Consult SVPD series system pages for additional details and
compatibility.

PS519326EN page 2

(D)

(D)

April 6, 2021 2:56 PM