SAMPLE ORDER NUMBER: ARCH-L-PA3-90-740-U-T2R-A15-AP-10K-PR
Product Family
ARCH-L=Archeon
Largew
10K=S eries 10kV UL 14 49 Surge Pr otective De vice
20K=Seri es 20kV UL 144 9 Surge Prot ective Devi ce
20KI=Se ries 20kV UL 14 49 Surge Pro tective Device wi th light indicato r
10MSP=Parall el 10kV MOV Sur ge Protect ive Device
20MSP=Para llel 20kV MO V Surge Protecti ve Device
K=Level Indicator
HA=50°C High Ambient Temperature
HSS=Factory I nstall Hous e Side Shield
PSC=Photocontrol Shorting Cap
NPC=NEM A Photocon trol - Multi -Tap
LLPC=Longlife Photocontrol Included
IP66=IP66 Rated Housing
FADC=Field Adjustable Dimming Controller
CC=Coas tal Constr uction 25
OA / RA1013=Photocontrol Shorting Cap
OA /RA1014= NEMA Pho tocontrol - 12 0V
OA /RA1016 =NEMA Pho tocontro l - Multi-Tap
OA /RA102 7=NEMA Ph otocontr ol - 480V
OA /RA120 1=NEMA Pho tocontro l - 347V
OA122 3=10kV Surge Module Replacement
A15-X X=Arm (15" St raight Arm)
FS IR-10 0=Wir eless Con guration Tool fo r Occu pancy Sensor
HS-ARCH=Fiel d Install AR CH House Si de Shield
NOTES:
1. Customer is re sponsible fo r engineerin g analysis to con rm pole and x ture compatib lity for all appl ications. Ref er to our white pap er WP513001EN for addit ional suppor t information .
2. No minal wattage v alues will be labe led on xture a s per ANSI C136.15. For speci c xture wat tage, refer to Pow er and Lumen tabl es.
3. On ly available in uni versal volta ge.
4. Only for use with 4 80V Wye system s. Per NEC, not for u se with ungroun ded systems, i mpedance gro unded system s or corner grou nded systems (c ommonly know n as Three Phase T hree Wire Delt a, Three Phase H igh Leg Delta an d Three Phase Co rner Grounde d
Delta systems).
6. If "PR" selected, dimming functionality not available, dimming leads will be capped.
7. The FSIR-100 accessory is required to adjust parameters.
8. Enlighted wireless system is not available with photocontrol receptacle (not required).
9. Enlighted wireless sensors are factory installed and require network components LWP-EM-1, LWP-GW-1, and LWP-PoE8 in appropriate quantities. See website for Enlighted application information.
10. HA option not available with the following congurations, 250W+, 210W+ if paired with HSS, or 5TLD 150W+.
11. HSS not available with 5WQ distribution, 5LTD 270W+.
12. Round pole adapter and mounting hardware included. "M" drill pattern.
13. Requires three house side shields.
14. Replace XX with color designation.
15. This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your lighting representative at Cooper Lighting Solutions for more information.
16. Utilizes internal step-down transformer when 347V or 480V is selected.
17. Controls system is not available with photocontrol (BPC), photocontrol receptacle (PR or PR7), or other controls systems (MS, ZD, ZW, LWR, DALI, or DIM).
18. Requires 4-PIN twistlock receptacle (ZD or ZW) option.
19. Replace XX with sensor color (WH, BZ or BK).
20. Sensor passive infrared (PIR) may be overly sensitive with operating below -20°C (-4°F).
21. For this device to be eld-congurable, requires WAC Gateway components WAC-PoE and WPOE-120 in appropriate quantities. Only compatible with WaveLinx system and software and requires system components to be installed for operation. See website for more
WaveLinx application information.
22. Not available with HA option.
23. Amber 590nm +/-5nm for wildlife and observatory use. Supplied in PA3 90 wattage bucket only.
24. Cannot be used with motion response control options.
25. Coastal construction nish salt spray tested to over 5,000-hours per ASTM B117, with a scribe rating of 9 per ASTM D1654.
26. Smart device with Sensor Conguration mobile application by Wattstopper required to change system defaults. See Controls Section for details.
LumenSafe Integrated Network Security Camera Technology Options (Add as Sux)
Product FamilyCa m era TypeData Backhaul
L=LumenSafe Technology*D=Dome Camera, Standard
*Consu lt LumenSafe sy stem pages for a dditional det ails and compat ibility.
(Fact ory set at 25 ° degrees)
ASJS45=Adjust able Slip tter
(Fact ory set at 45 °
=15" Stra ight Mast Ar m
=Adju stable Slip tter
=Adju stable Slip tter
degr ees)
Options (Add as Sux)Controls
6
26
26
3, 7
3, 8, 9
3, 8, 9
16, 17
16, 17
19, 20, 21, 22
19, 20, 21, 22
14
14
14
19, 20, 21, 22
19, 20, 21, 22
W=Wi- Fi Networ king w/ Omni -Direct ional Anten na
E=Ethernet Networking
12, 14
PR=NEMA 3-PIN Twistlock Photocontrol Receptacle
PR7=NEMA 7-PIN Twistlock Photocontrol Receptacle
SPB1=Dimming Occupancy Sensor with Blu etooth Interface, <8’ Mou nting
SPB2=Dimm ing Occupancy Se nsor with Blu etooth Inte rface, 8’ -20’ Mount ing
SPB4=Dimming Oc cupancy Se nsor with Bl uetooth Int erface, 21’ -40’ Mou nting 26
10
11
24
Accessories (Order Separately)
15
11, 13
H=Dome Camera, Hi-Res
Z=Dome Camera, Remote PTZ
MS/DIM-L08=Motion S ensor for Dimming O peration , Maximum 8' M ounting He ight
MS/DIM-L20=Mo tion Sensor for Dim ming Opera tion, Maxim um 9' - 20' Mou nting Heigh t
MS/DIM-L40=M otion Sens or for Dimming Oper ation, Max imum 21' - 40' Mo unting Height
LWR-LW=E nlighted Wirele ss Sensor, Wi de Lens for 8' - 16' Mo unting Heights
LWR-LN= Enlighte d Wireless S ensor, Narrow Lens fo r 16' - 40' M ounting Heights
5LTD =DALI 3
ZD=DALI-enabled 4-PIN Twistlock Receptacle
ZW=WaveLinx-enabled 4-PIN Twistlock Receptacle
SWPD4XX=Wav eLinx Wire less Sensor, 7’ - 15’ Mountin g Height
SWPD5XX=Wave Linx Wirel ess Sensor, 15’ - 4 0’ Mountin g Height
VGS-ARCH=Sho rt Vertic al Drop Shie ld
VGL-ARCH=Long Ver tical Dro p Shield
AS JS15-X X=Adjusta ble slipt ter (Factory set a t 15 degrees)
ASJ S25-X X=Adjust able slipt ter (Facto ry set at 25 degrees)
ASJS45-XX=Adjus table sliptte r (Factory s et at 45 degrees)
SWPD4-XX=WaveLi nx Wireles s Sensor, 7' - 15' M ounting He ight
SWP D5-XX= WaveLinx Wi reless Sen sor, 15' - 40' Mo unting Heig ht
C=Cellular, Custo mer Installed SI M Card
A=Cel lular, Factory Ins talled AT&T SIM C ard
V=Cel lular, Factor y Installe d Verizon SIM C ard
S=Cellular, Facto ry Install ed Sprint SIM Card
17
AP
=Gre y
BZ
=Bronze
BK
=Black
DP
=Dark Platinum
WH
=White
3, 7
3, 7
PS506051EN page 2
April 12, 2021 3:11 PM
Streetworks
Product Specications
Construction
• Heavy-duty die -cast aluminum housing and door
• Tool-less entry, hinged removable door for easy
maintenance
• 3G vibration rated
Optics
• Choice of four patented, high eciency AccuLED
Optics
• Available in Type IIR, IIU, III, IV wide and V square
wide the optics are precisely designed to shape the
distribution maximizing eciency and application
spacing
• Offered standard in 4000K (+/- 275K) CCT and
minimum 70 CRI. Optional 2200K, 2700K,3000K,
and 5000K CCT
• For the ultimate level of spill light control, an
optional house side shield accessory is available
and can be eld or factory installed
• Optics are IP66 enclosure rated
• IDA Certied for 300 0K CCT and warmer only
Electrical
• 120-277V 50/60Hz, 347V 60Hz or 480V 60Hz
operation
• Standard 0-10V dimming
• 10kV/10kA common- and differential- mode surge
protection available
• Ambient operating temperature from -40°C to
40°C; 50°C HA, high ambient, capability available
• Standard with three position tunnel type
compression terminal block
• Greater than 98% lumen maintenance expected at
60,000 hours
• Replaces 400W to 1000W HID
• Luminaire available with the eld adjustable
dimming controller (FADC) to manually adjust
wattage and reduce the total lumen output and
light levels. Comes pre-set to the highest position
at the lumen output selected.
Mounting
• Two-bolt /one-bracket slipt ter with cast-in pipe
stop and 2.5° leveling steps
• Fixed-in-place bird guard seals around 1-1/4” to 2”
Archeon Large
(1-5/8” to 2-3/8” O.D.) mounting arms
• Optional 15” pole mount arm available with round
pole adapter and mounting hardware included
Finish
• Housing and cast parts nished in ve -stage super
TGIC polyester powder coat paint, 2.5 mil nominal
thickness for superior protection against fade and
wear
• Consult your lighting representative at Cooper
Lighting Solutions for a complete selection of
standard colors
Shipping Data
• Approximate Net Weight: 27 lbs. (12.2 kgs.)
• Effective Projected Area: 0.86 (Sq. Ft.)
Warranty
• Five year limited warranty, consult website for
details. www.cooperlighting.com/legal
• Optional ten-year warrant y, please see your
CLS Streetworks sales representative for more
information
Energy and Performance Data
Power and Lumens (PA3 Light Engine)
Light E ngine - PA3*PA3-90PA3-100PA3-110PA3-120PA3-130PA3-140PA3-150PA3-160PA3-170PA3-180
Photocontrol receptacles (PR and PR7) provide a exible solution to enable “dusk-to-dawn” lighting by sensing light levels. Advanced control systems compatible with ANSI
C136.41 7-pin standards can be utilized with the PR7 receptacle.
Dimming Occupancy Sensor (SPB, MS/DIM-LXX)
These sensors are factory installed in the luminaire housing. When the SPB or MS/DIM sensor options are selected, the occupancy sensor is connected to a dimming driver
and the entire luminaire dims when there is no activity detected. When activity is detected, the luminaire returns to full light output. The MS/DIM sensor is factory preset to
dim down to approximately 50 percent power with a time delay of ve minutes. SPB motion sensors require the Sensor Conguration mobile application by Wattstopper to
change factory default dimming level, time delay, sensitivity and other parameters. Available for iOS and Android devices. The SPB sensor is factory preset to dim down to
approximately 10% power with a time delay of ve minutes. The MS/DIM occupancy sensors require the FSIR-100 programming tool to adjust factory defaults.
Enlighted Wireless Control and Monitoring (LWR-LW and LWR-LN)
Enlighted is a connected lighting solution that combines a broad selection of energy-ecient LED luminaires with a powerful integrated wireless sensor system. The sensor
controls the lighting system in compliance with the latest energy codes and collects valuable data about building perfor-mance and use. Software applications turn the
granular data into information through energy dashboards and specialized apps that make it simple and help optimize the use of building resources, beyond lighting. For
additional details, refer to the Enlighted product guides.
LumenSafe Integrated Network Security Camera (LD)
Cooper Lighting Solutions brings ease of camera deployment to a whole new level. No additional wiring is needed beyond providing line power to the luminaire. A variety
of networking options allows security integrators to design the optimal solution for active surveillance. As the ideal solution to meet the needs for active surveillance, the
LumenSafe integrated network camera is a streamlined, outdoor-ready xed dome that provides HDTV 1080p video. This IP camera is optimally designed for deployment in
the video management system or security software platform of choice.
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com