Cooper Lighting Solutions 79-PF LED User Manual

DESCRIPTION

The 79-PF LED achieves a seamless, continuous line of light while softly
washing perimeter walls. The 79-PF LED incorporates an optical grade
acrylic reflector that can be shipped in lengths up to 40 ft. Installed
after the housing and wiring, the PentaFlex
eliminates gaps and construction flaws. Now available with advanced

TM

reflector beautifully

LED technology, the 79-PF represents a perfect harmony of efficacy and
refinement.

SPECIFICATION FEATURES

NEO-RAY

Catalog # Type

Project

Comments Date

Prepared by

Construction

20-gauge cold rolled steel
housing with extruded aluminum

trim.

Reflectors

PentaFlex
reflector is seamless up to 40’.

TM

, continuous white

Finish

Durable, low gloss, white, high
reflectance powder coated acrylic
finish.

1 3/8"

7/8"

Electrical

Long-life LED system coupled
with electrical driver to deliver
optimal performance. LED’s
available in 3000K, 350 0K or
4000K with a typical CRI ≥ 82.
Projected life is 60,000 hours
at 82% lumen output. Electronic
drivers are available for 120-277V
applications. Fixtures and
electrical components certified to
UL and CUL standards. Damp
location rated.

11 15/16"

10 3/4"

TM

PentaFlex
Reflector

Ceiling
Extrusion

Wall Rail

Wall Extrusion

Shielding

Luminaire ships standard with
no shielding option. Dust cover
available upon request.

Mounting

Perimeter fixtures require
accurate installation. Refer
to installation instructions for
detailed mounting information.
Perimeter fixtures must be
installed prior to finishing the
ceiling.

Tie Wire
(Not by Neo-Ray)

9 1/32"

8"

79-PF LED

PentaFlex

Perimeter

Direct Wall Wash

TM

LED

1/2"

7-11/32”(187mm) Fixture Opening

Note: Actual wall length must be provided; do not

round up. Refer to length chart on page 3.

ORDERING INFORMATION

Sample Number: S79PF-2-L35-4-UDD-1D-W

SERIES OPTIONS LIGHT LEVEL COLOR TEMPERATURE LENGTH OF RUN INPUT VOLTAGE

S79 = Series 79 PF = PentaFlex

DRIVER CIRCUITS WIRING OPTIONS COLOR OPTIONS

DD = 0-10V Dimming Driver
5LT = FifthLight DALI

Notes:

* See page 2 for specific notes

4

-1 = Single Circuit

-S = Secondary Circuit

8-5/8”(219mm) Ceiling Opening

TM

-1 = Light Level 1 (1386 Lms @ 29 W)
(346 Lumens per ft @ 7.25W)

-2 = Light Level 2 (1802 Lms @ 38 W)

(450 Lumens per ft @ 9.5W)

B = Battery Pack
D = Standard
E = Emergency

Cooper Lighting Solutions

18001 East Colfax Avenue
Aurora, CO 80011
P. 303-393-1522

www.cooperlighting.com

5

4

Specifications and
dimensions subject to
change without notice.

-L30 = LED 3000K

-L35 = LED 3500K

-L40 = LED 4000K

-DC = Dust Cover

-EP = End Plate (Flanged)

-M = Mirror Option

-Length of Run =

____Ft ____In

-U = Universal (120V-277V)

-3 = 347V

-W = Matte White Trim

-CC = Custom Color Trim

3

2

ADN142457

05-09-19

1 of 3

Photometric Data - All data certified to LM-79 standards in a NAVLAB approved testing facility

NEO-RAY

831

623

416

2

208

1

NOTES

Filename: 79PF-1-L35-4-UNV-STD-1C-W
Test Number: P24881
Lumens: 1386 Lm
Watts: 28.9 W
LPW: 48 Lm/W
CCT: 350 0K

ZONAL LUMEN STUDY

Zone Lumens % Fixture

0-30 648 27

0-40 1066 45

0-60 1883 80

0-90 2331 100

90-180 0 0

LUMINANCE DATA (cd / sq.m

Angle 0-Deg 45-Deg 90-Deg

45 2421 2548 2670

55 2304 2399 2494

65 2120 2128 2158

75 1756 1608 1558

85 1065 771 734

1. Not all dimming options available every length; please consult factory for specific details

2. For configurable runs; specify exact length; do not round up. Upon product configuration / quoting, actual fixture length will be adjusted to nominal length (1 ft increments).
Nominal fixture length will accommodate up to +6 inches of field adjustability at both ends. Sub-foot length is achieved in the field during installation by trimming 6 inch
end extensions.

3. 347V is achieved using remote transformer.

4. Not all dimming options available every length; please consult factory for specific details.

5. Battery pack options are not available in every length; please consult factory for specific details.

Mounting Information - Refer to installation instructions for detailed mounting information

NOTE: A pair of end closures per run are provided by default. No flanged endplates are provided. If flanged endplates are required,
order “EP” in catalog nomenclature. EP option includes a pair of left and right flanged endplates.

End Closure
(No Flange)
(For Wall)

Pattern Leg 1

Inside Corner
90o Unlit

Outside Corner
90o Unlit

Pattern Leg 2

12-1/4”
(311mm)

12-1/4”
(311mm)

Wall Side

2-11/16”
(68mm)

2-11/16”
(68mm)

Extension

Wall

EP = Flanged endplate option.
Attach flanged endplate to trim tile or
sheet rock.

NOTE: Patterns require corner sections.
Order corner sections seperately as required.

Pattern Leg 3

.

Sample Number: S79PF-2-L35-4-UDD-1D-W

Cooper Lighting Solutions

18001 East Colfax Avenue
Aurora, CO 80011
P. 303-393-1522

www.cooperlighting.com

Specifications and
dimensions subject to
change without notice.

ADN142457

05-09-19

2 of 3