Cooper Lighting VXS User Manual

INVUE

23" [584mm]

5" [127mm]

[152mm]

13 1/2" [343mm]

AREA ROADWAY

VXS

VISION SITE SMALL

DESCRIPTION

DIMENSIONS

The classic lines and sophisticated construction of the Vision Site luminaire makes it an ideal complement to site design. The combination of smooth contours and sharp rear reveals allow the ﬁxture to change character from different viewing angles while providing excellent low-glare photometrics. U.L. listed and CSA certiﬁed for wet locations.

EPA-Effective Projected Area: Single 1.27 / Single Structural 1.28

STRUCTURAL MOUNT

12 13/16"

[325mm]

42-175W

Metal Halide

High Pressure Sodium

Compact Fluorescent

ARCHITECTURAL

AREA LUMINAIRE

• One-piece, die-cast aluminum housing

• One-piece aluminum die-cast door frame. Door frame opens via release of one ﬂush mount toolless latch

• One-piece extruded rectangular 5" arm

• Optional Strut Rod and Clevis set for pole mount or wall mount

• Impact resistant 1/8" thick tempered clear ﬂat glass

• Ballast and related electrical componentry are mounted to a reinforced one piece galvanized steel tray with integral handle

ORDERING INFORMATION

SAMPLE NUMBER: VXS-175-MH-MT-3S-BK-PRCPS-L

Lamp Type MH=Metal

HPS=High

CF=Compact

Product Family VXS=Vision Site

Small

Structural Options Pole Mount PRCPS=Strut Rod and Clevis Set for

PRCSS=Stainless Steel Strut Rod and

PRCPR=Strut Rod and Clevis Set for

PRCSR=Stainless Steel Strut Rod and

Wall Mount WRCP=Strut Rod and Clevis

(Painted to match ﬁxture)

WRCS=Stainless Steel Strut Rod and

Clevis Set (Clevis’ painted to

Lamp

Wattage

HID 70=70W 100=100W 150=150W 175=175W Compact Fluorescent 42=42W 57=57W

Square Poles (Painted to match ﬁxture)

Clevis Set for Square Poles (Clevis’ painted to match ﬁxture)

Round Poles (Painted to match ﬁxture)

Clevis Set for Round Poles (Clevis’ painted to match ﬁxture)

match ﬁxture)

Halide

Pressure Sodium

Fluorescent

Voltage 120=120V 208=208V 240=240V 277=277V 347=347V 480=480V

DT=Dual-Tap

MT=Multi-Tap

TT=Triple-Tap

Wired 347V

UNV=120-277V Universal

Options F=Single Fuse (120, 277 or 347V)

Specify Voltage

FF=Double Fused

(208, 240 or 480V) Specify Voltage

Q=Quartz Restrike EM=Quartz Restrike with Time

Delay (Also Strikes at Cold

Start)

EM/SC=Quartz Emergency

Separate Circuit

42CF/EM=Emergency Battery

Backup

PC=Button Type Photocontrol

(Specify Voltage)

HS=House Side Shield VS=Polycarbonate Vandal

Shield

L=Lamp Included

Wired 277V

Electronic Ballast

Optical System 2S=Type II 3S=Type III 4S=Type IV 5S=Type V SL=Spill Light

Eliminator

Colors

(add as sufﬁx/ must specify)

BK=Black AP=Grey BZ=Bronze WH=White DP=Dark Platinum GM=Graphite

Metallic

Accessories OA/RA1016=Photocontrol—Multi-Tap OA/RA1027=Photocontrol—480V OA/RA1201=Photocontrol—347V MA1071-XX=5" Arm For Square Pole MA1074-XX=5" Arm For Round Pole MA1073-XX=Direct Mount for Square Pole MA1076-XX=Direct Mount For Round Pole MA1077-XX=Wall Bracket with 5" Arm MA1200-XX=Direct Wall Mount Kit MA1101-XX=Single Arm Tenon Adapter for 2 3/8" O.D. Tenon MA1102-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon MA1103-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon MA1104-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon MA1105-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon MA1106-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon MA1107-XX=2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon MA1108-XX=Single Arm Tenon Adapter for 3 1/2" O.D. Tenon MA1109-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon MA1110-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon MA1111-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon MA1112-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon MA1113-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon MA1114-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon

Options & Accessories

(See Below)

26" [703mm]

• Choice of ﬁve (5) high efﬁciency segmented optical systems constructed of premium 95% reﬂective anodized aluminum sheet

• Medium-base porcelain socket for HID lamp sources

• Approximate net weight: 35 lbs. (16 kgs.)

1100

COOPER LIGHTING

WATTAGE TABLE

VXS

IP66 Rated

NOTE: 1 Arm not included. See accessories. 2 All HID lamps are medium-base. 3 Available in Type 3S, 4S, and 5S distributions only. 4 Nominal M.O.L lamp length of 57W

CFL not to exceed 7". 5 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V. Specify with UNV voltage designation. 6 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 7 Dual-tap is 120/277V wired 277V. 8 Multi-tap is 120/208/240/277V wired 277V. 9 Triple-tap is 120/277/347V wired 347V. 10 Custom and RAL color matching available upon request. Consult your INVUE Lighting Systems Representative for further information. 11 Add as sufﬁx in the order shown. 12 Structural options do not include arm assembly (See Accessories). Compatible with 5" MA1071 arm only. 13 Structural options do not include arm assembly (see accessories). Compatible with 5" MA1074 arm only. 14 Quartz options not available with SL optic. 15 Battery backup operates 90 minutes at minimum 32°F (0°C), 42W maximum. Type 3S, 4S, 5S optics only. 16 House side shield not available on 5S and SL optics. 17 Order separately, replace XX with color sufﬁx. 18 For use in down lighting applications only. 19 Speciﬁcations and dimensions subject to change without notice.

3G Vibration Tested

Metal Halide 70, 100, 175W

High Pressure Sodium 70, 100, 150W

Compact Fluorescent 42, 57W

DIMENSIONS

[178mm]

28" [724mm]

6" [152mm

10" [254mm]

17" [432mm]

STRUCTURAL MOUNT

15 7/8"

[404mm]

DESCRIPTION

INVUE

VXM

VISION SITE

MEDIUM

AREA ROADWAY

33 7/8" [860mm]

EPA-Effective Projected Area: Single 1.6 / Single Structural 1.82

ORDERING INFORMATION

SAMPLE NUMBER: VXM-400-MH-MT-3S-BK-PRCPS-L

Product Family VXM=Vision

Structural Options Pole Mount PRCPS=Strut Rod and Clevis Set for

PRCSS=Stainless Steel Strut Rod and

PRCPR=Strut Rod and Clevis Set for Round

PRCSR=Stainless Steel Strut Rod and

Wall Mount WRCP=Strut Rod and Clevis

WRCS=Stainless Steel Strut Rod and

WATTAGE TABLE

VXM

Metal Halide 175, 250, 400W

Pulse Start Metal Halide 250, 320, 350, 400W

High Pressure Sodium 150, 250, 400W

Compact Fluorescent (2) 57, (2) 70W

Electrodeless Fluorescent 85W

NOTE: 1 Arm not included. See accessories. 2 All HID lamps are mogul-base. 3 320/350W Pulse Start Metal Halide lamps only. 4 400W Metal Halide requires reduced

envelope ED28 lamp. 5 Dual Compact Fluorescent lamp options available in Type 4S distribution only. 6 Electrodeless Fluorescent QL lamp only. Available in Type 3S and 5S distributions only. 120V only. 7 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V. Specify with UNV voltage designation. 8 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 9 Dual-tap is 120/277V wired 277V. 10 Multi-tap is 120/208/240/277V wired 277V. 11 Triple-tap is 120/277/347V wired 347V. 12 Custom and RAL color matching available upon request. Consult your INVUE Lighting Systems Representative for further information. 13 Add as sufﬁx in the order shown. 14 Structural options do not include arm assembly (see accessories). Compatible with 10" MA1051 arm only. 15 Structural options do not include arm assembly (see accessories). Compatible with 10" MA1053 arm only. 16 Wall mount structural options do not include arm assembly (See Accessories). Compatible with 10" MA1231 arm only. 17 Quartz options not available with SL optic. 18 Dual switching requires dual 57W or dual 70W Compact Fluorescent lamps. Allows independent switching control of each lamp through use of two (2) electronic ballasts. Allows 50% power reduction when dual ballasts are independently wired and controlled. 19 House side shield not available on 5S and SL optics. 20 Order separately, replace XX with color sufﬁx. 21 Use when mounting ﬁxture heads at 90° increments. 22 For use in down lighting applications only. 23 Includes arm only. Must specify WRCP or WRCS in ﬁxture ordering logic. Down light only.

24 Speciﬁcations and dimensions subject to change without notice.

Lamp

Wattage

HID 150=150W

Site

175=175W

Medium

250=250W 320=320W 350=350W 400=400W Compact Fluorescent 114=(2) 57W 140=(2) 70W Electrodeless Fluorescent 85=85W

Square Poles (Painted to match

ﬁxture)

Clevis Set for Square Poles (Clevis’ painted to match ﬁxture)

Poles (Painted to match ﬁxture)

Clevis Set for Round Poles (Clevis’ painted to match ﬁxture)

(Painted to match ﬁxture)

Clevis Set (Clevis’ painted to match

ﬁxture)

Lamp Type MH=Metal

MP=Pulse Start

HPS=High

CF=Compact

QL=Electrodeless

Halide

Metal Halide

Pressure Sodium

Fluorescent

Options F=Single Fuse (120, 277 or 347V)

FF=Double Fuse

Q=Quartz Restrike EM=Quartz Restrike with Time

EM/SC=Quartz Emergency

R=NEMA Twistlock Photocell

DS=Dual Fluorescent Switching

HS=House Side Shield VS=Polycarbonate Vandal Shield T=Terminal Block L=Lamp Included

Specify Voltage

(208, 240 or 480V) Specify Voltage

Delay (Also Strikes at Cold

Start)

Separate Circuit

Receptacle

Control

Voltage 120=120V 208=208V 240=240V 277=277V 347=347V 480=480V DT=Dual-Tap Wired 277V MT=Multi-Tap Wired 277V TT=Triple-Tap Wired 347V UNV=120-277V Universal

Electronic Ballast

IP54 Rated

Optical System 2S=Type II 3S=Type III 4S=Type IV 5S=Type V SL=Spill Light

Eliminator

2F=Design 20

Formed

3F=Design 30

Formed

4F=Design 40

Formed

5F=Design 50

Formed

Accessories OA/RA1016=Photocontrol—Multi-Tap OA/RA1027=Photocontrol—480V OA/RA1201=Photocontrol—347V MA1050-XX=6" Arm For Square Pole MA1051-XX=10" Arm For Square Pole MA1052-XX=6" Arm For Round Pole MA1053-XX=10" Arm For Round Pole MA1054-XX=Wall Bracket with 6" Arm MA1056-XX=Direct Mount for Square Pole MA1057-XX=Direct Mount for Round Pole MA1201-XX=Direct Wall Mount Kit MA1207-XX=Mast Arm Adapter MA1231-XX=VXM Structural Mount Wall Mount Arm MA1017-XX=Single Arm Tenon Adapter for 2 3/8" O.D. Tenon MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon MA1115-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon MA1116-XX=2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon MA1010-XX=Single Arm Tenon Adapter for 3 1/2" O.D. Tenon MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D.Tenon

3G Vibration Tested

40°C Ambient

Colors

(add as sufﬁx/ must specify)

BK=Black AP=Grey BZ=Bronze WH=White DP=Dark Platinum GM=Graphite Metallic

Options & Accessories

(See Below)

85-400W

Metal Halide

Pulse Start Metal Halide

High Pressure Sodium

Compact Fluorescent

Electrodeless Fluorescent

ARCHITECTURAL

AREA LUMINAIRE

• One-piece, die-cast aluminum housing

• One-piece aluminum die-cast door frame. Door frame opens via release of one ﬂush mount toolless latch

• One-piece extruded rectangular 6" or 10" arm

• Optional Strut Rod and Clevis set for pole mount or wall mount

• Impact resistant 1/8" thick tempered clear ﬂat glass

• Ballast and related electrical componentry are mounted to a reinforced one piece galvanized steel tray with integral handle

• Choice of two (2) high efﬁciency segmented optical systems constructed of premium 95% reﬂective anodized aluminum sheet

• Mogul-base porcelain socket for HID lamp sources

• Approximate net weight: 51 lbs. (23 kgs.)

COOPER LIGHTING

1101

Cooper Lighting VXS User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual