Cooper Lighting UMX Watertight User Manual

COOPER LIGHTING - SURE-LITES
11 3/4" (298mm)
7 1/2" (191mm)
11 3/4"
(298mm)
®
INDUSTRIAL & HAZARDOUS LOCATION Exit Signs
DIMENSIONS
DESCRIPTION
The UMX Series watertight and corrosion-resistant exit with tough polycarbonate lens is designed for use where rain, moisture, dust or corrosives are present. Economical long life fluorescent lamps provide highly visible signage and downlighting. The vibration resistant lamps make the UMX perfect for heavy industrial applications (NEMA 4X Listed).
ORDERING INFORMATION — AC ONLY EXITS
Voltage No Left Right Double No Left Right Double
120 VAC UMX7 UMX6 UMX8 UMX5 UMX3 UMX2 UMX4 UMX1 277 VAC UMX71 UMX61 UMX81 UMX51 UMX31 UMX21 UMX41 UMX11
ORDERING INFORMATION
SAMPLE NUMBER: UMX7
Model Number
See chart
ORDERING INFORMATION — SELF-POWERED EXITS
Battery No Left Right Double No Left Right Double
Lead Calcium UMX207 UMX206 UMX208 UMX205 UMX203 UMX202 UMX204 UMX201 Lead Calcium Battery w/Remote Capability UMX107 UMX106 UMX108 UMX105 UMX103 UMX102 UMX104 UMX101 Nickel Cadmium UMX227 UMX226 UMX228 UMX225 UMX223 UMX222 UMX224 UMX221
WATTAGE RATINGS
UMX201 – UMX208 Lead Calcium=18W for 1 1/2 hrs.; 15W for 2 hrs. UMX101 – UMX108 Lead Calcium=27W for 1 1/2 hrs.; 24W for 2 hrs. UMX221 – UMX228 Nickel Cadmium=15W for 1 1/2 hrs.; 12W for 2 hrs.
ORDERING INFORMATION
SAMPLE NUMBER: UMX207
Model Number
See chart
Energy Data AC Only Exits
Fluorescent Exits-6W Lamps 19W 23W .33A .32A >.47 >.26 <6% <9%
Energy Data — Self-Powered Exits
Fluorescent Exits - 6W Lamps 41W 43W .51A .22A >.66 >.69 <14% <14%
Standby Mode (Fully Charged Battery)
the standby operating mode.
Fluorescent Exits - 6W Lamps 29W 29W .42A .17A >.57 >.62 <9% <38%
Red Letters/White Background Green Letters/White Background
Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow
Accessories (Order Separately)
DC Socket Kit UDC6=Two 6V, 6.6W DC Lamps UDC12=Two 12V, 7.5W DC Lamps
Red Letters/White Background Green Letters/White Background
Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow
Factory Options DH=Two 6V, 7.2W Weatherproof Heads
(UMX101 thru UMX108 only)
TDM=Time Delay Monitor (Exits with Heads only) TH=Thermal Heater for Battery Compartment (For Use
w/Lead Calcium Exits)
Input Power; Input Current (Max.): Power Factor: T.H.D.:
120V 277V 120V 277V 120V 277V 120V 277V
Charge Mode (Fully Discharged Battery) Sealed Lead Calcium Battery
Input Power; Input Current (Max.): Power Factor: T.H.D.:
120V 277V 120V 277V 120V 277V 120V 277V
Sealed Lead Calcium Battery Input Power consumption is reduced by approximately 18 Watts in
Vandal Shield WG7=Wire Guard
VS2=Polycarbonate Vandal Shield VS2WP=Polycarbonate Vandal
Shield/Weather Resistant
Accessories (Order Separately) WG7=Wire Guard
Vandal Shield VS2=Polycarbonate Vandal Shield VS2WP=Polycarbonate Vandal Shield/Weather Resistant
UMX Exits
Sealed Nickel Cadmium Battery
UMX SERIES
Wet Location
AC Only
Self-Powered
EXIT LIGHTING
• NEMA 4X Listed
• Dual-voltage input 120/277VAC, 60Hz (Self-Powered Exits)
• Fully gasketed housing
• Tough, high contrast polycarbonate lens
• AC: two F6T5 fluorescent lamps
• DC: two 6V, 6W DC lamps
• Surface mount only
• Available with emergency lighting heads mounted on enclosure
• For operation in ambient temperatures above 32°F
• Self-powered Exits feature line-latching, solid-state voltage limited charger, solid-state switching, low-voltage disconnect, brownout circuit, overload/short-circuit protection, test switch/power indicator light
• UL 924 Wet Location Listed, Life Safety NFPA 101, NEC/OSHA, most state and local codes.
COOPER LIGHTING
663
Loading...