Cooper Lighting TL91SWW3VFG User Manual

Catalog #

Project

Comments

Prepared by

Type

Date

SPECIFICATION FEATURES

08/04/2008 6:08:05 PM

Consult your representative for additional options and finishes.

Specifications and Dimensions subject to change without notice.

TLU_ADH081550

DIMENSIONS

DRILLING PATTERNS

DESCRIPTION

The Streetworks Talon is the most versatile, functionally designed,

universally adaptable outdoor luminaire available. The Talon brings

outstanding performance to walkways, parking lots, roadways, loading

docks, building areas, and any security lighting application. U.L. listed and

CSA certified for wet locations. IP65 Rated.

Construction

One-piece heavy-wall, die-cast

aluminum construction with

integral reveal channels along top

surface of housing. Internal cast-in

wall separates optical and

electrical chambers allowing

components to operate cooler.

One-piece die-cast aluminum door

frame with integral cast-in gasket

channel seals optical chamber to

an IP65 rating. Stainless steel

latches and hinges allow for

toolless opening and removal of

door frame.

Reflector

Choice of 14 high efficiency optical

systems utilizing horizontal and

vertical lamp orientations. Optional

high efficiency segmented optical

systems constructed of premium

95% reflective anodized aluminum

sheet. Optical segments are rigidly

mounted inside a thick gauge

aluminum housing for superior

protection. All segment faces are

clean of rivet heads, tabs or other

means of attachment which may

cause streaking in the light

distribution.
Standard with mogul-base socket.

All optical modules feature quick

disconnect wiring plugs and are

field rotatable in 90° increments.

Electrical

Electrical componentry mounted

on a swing-down galvanized steel

power tray with integral handle.

Electrical disconnects allow tray to

be completely removed from the

housing providing ample hand and

tool room for attachment of fixture

during installation.

Mounting

Extruded 10 1/2" aluminum arm

includes internal bolt guides

allowing for easy positioning of

fixture during installation to pole

or wall surface. Standard single

carton packaging of housing,

square pole arm and round pole

adapter for contractor friendly

arrival of product on site.

Finish

Housing and arm finished in a 5

stage premium TGIC polyester

powder coat paint, 2.5 mil nominal

thickness for superior protection

against fade and wear. Standard

colors include black, bronze, grey,

white, dark platinum, and graphite

metallic.

TLU

TALON LARGE

250-1000W

High Pressure Sodium

Pulse Start Metal Halide

Super Metal Halide

Metal Halide

AREA LUMINAIRE

E N E R G Y D ATA

CWI Ballast Input Watts

250W HPS HPF (300 Watts)

CWA Ballast Input Watts

250W MH HPF (295 Watts)
320W MP HPF (365 Watts)
350W MP HPF (400 Watts)
400W MP HPF (448 Watts)
400W MH HPF (455 Watts)
400W HPS HPF (465 Watts)
750W MP HPF (820 Watts)

1000W HPS HPF (1100 Watts)
1000W MH HPF (1080 Watts)

Effective Projected Area: (Sq. Ft.)
Without Arm: 1.83
10 1/2" Arm: 0.68

S H I P P I N G D ATA

E P A

Approximate Net Weight:
400W 91 lbs. (41.36 kgs.)
1000W 98 lbs. (44.54 kgs.)

875W MP HPF (940 Watts)

S

Y

S

T

E

M

S

C

E

R

T

I

F

I

E

D

LAMP TYPE WATTAGE

Metal Halide

250, 400, 1000W

Pulse Start Metal Halide 250, 320, 350, 400, 450, 750, 875, 1000W

Super Metal Halide 250, 400, 750, 1000W

High Pressure Sodium 250, 400, 1000W

1 4 1/8"

[359mm]

3 1/8"

10 1/2"

[267mm]

[79mm]

21 5/8" [549mm]

31" [787mm]

T Y P E “ M ” WA L L M O U N T

3/4" [ 20mm]
dia. hole

(2) 5 /8" [16m m]
dia. holes

4 7/8 " [124mm ]

2 7/16 " [124mm ]

2 5/16 "

[59mm ]

12"

[305mm]

4 7/8"

[124mm]

9/16" [14mm]

Dia. Hole (4)

6 1/2"

[165mm]

8"

[203mm]

10 1/2"

[267mm]

STREETWORK S

™

Specifications and Dimensions subject to change without notice.

ORDERING INFORMATION

TALON LARGE

TLU

S AM PL E NU MB ER : TL 91 SW W3 VF G

TLU

Product Family

1

TLU=Talon Site

Large

Lamp Wattage
25=250W
32=320W

2

35=350W

2

40=400W
75=750W
87=875W

2

91=1000W

3

Distribution
Horizontal Lamp
2F=Type II Formed
2S=Type II Segmented

4

3F=Type III Formed
3S=Type III Segmented

4

4F=Type IV Formed
4S=Type IV Segmented

4

5F=Type V Formed
5S=Type V Segmented

4

SL=Spill Light Eliminator

3

Vertical Lamp
3V=Type III Vertical
4V=Type IV Vertical
AR=Area Round
AS=Area Square
AF=Automotive Front Row

Lens Type
F=Flat Glass
S=Sag Glass

Options (add as suffix/must be

ordered in alphanumeric order)
1=Single Fuse

[120, 277 or 347V]

5

2=Double Fuse

[208, 240 or 480V]

5

3=Three Place Terminal Block
4=NEMA Twistlock

Photocontrol Receptacle

B=Internal House-side Shield

6

DM=Direct Mount for Pole
E=Quartz Restrike w/Delay

[Also Strikes at Cold Start]

7

H=Plug-in Starter Receptacle

8

HL=Hi/Low Dimming

9

L=Lamp Included
Q=Quartz Restrike

[Hot Restrike Only]

7

U=U.L. Listed
WM=Wall Bracket with

10 1/2" Arm

Accessories

(order separately/replace XX with color designation)

OA/RA1016=NEMA Photocontrol (105-285V)
OA/RA1027=NEMA Photocontrol (480V)
OA/RA1201=NEMA Photocontrol (347V)
OA/RA1013=Shorting Cap
MA1010-XX=Single Tenon Adapter for 3 1/2" O.D. Tenon
MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1017-XX=Single Tenon Adapter for 2 3/8" O.D. Tenon
MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1049-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1213-XX=External House-side Shield Kit [EPA=0.38]

6

NOTES: 1 10 1/2" arm and round pole adapter included with fixture. 2 320/350/875W Pulse Start Metal Halide lamp only. 3 Requires reduced envelope lamp. 4 Maximum wattage on segmented optical distributions is 400W.

400W Metal Halide lamp must use reduced envelope ED-28 lamp. 5 Must Specify Voltage. 6 House-side shield not available on 5S, 5F, AS, AR and SL optics. 7 Quartz options not available with SL and AF optics.
8 Not available in 1000W. 9 Requires vertical lamp orientation. Provides 24V low voltage leads used in dimming control. 10 Specifications and dimensions subject to change without notice.

Lamp Type
S=High Pressure Sodium
R=Super Metal Halide
M=Metal Halide
P=Pulse Start Metal Halide

Ballast Type
C=CWI
H=Reac./HPF
K=10KV CWA
M=Mag. Reg.
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA

Colors (add as suffix/

must specify)

WH=White
BK=Black
AP=Grey
BZ=Bronze
DP=Dark Platinum
GM=Graphite Metallic

Voltage
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
N=Multi-Tap wired 277V
W=Multi-Tap wired 120V
V=Multi-Tap wired 240V

Streetworks • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]

TLU_ADH081550

08/04/2008 6:08:05 PM