Cooper Lighting Thin Profile Exit TPX Series Specification Sheet

Page 1
638
EXIT SIGNS Architectural
COOPER LIGHTING
COOPER LIGHTING - SURE-LITES
®
DIMENSIONS
DESCRIPTION
The TPX Series also includes a Remote Powered Exit which can be powered from a TPX Series AC Only or Self­Powered Exit.
13 5/8" (346mm)
10 3/4" (273mm)
3/4"
(19mm)
2 1/4"
(57mm)
8 1/4"
(210mm)
3/4"
(19mm)
2 1/4"
(57mm)
4 7/8"
(124mm)
ORDERING INFORMATION-AC ONLY EXITS
SAMPLE NUMBER: TPX610000RB
Energy Data
Standard Power - LED Exits
Input Power: Input Current (Max.): Power Factor: T.H.D.:
120V 277V 120V 277V 120V 277V 120V 277V
Red Letters Single Face 5.6W 5.7W .07A .03A >.71 >.71 <36% <36% Red Letters Single Face with Remote 7.3W 7.3W .07A .03A >.83 >.83 <33% <34% Green Letters Single Face 6.7W 6.8W .07A .03A >.79 >.79 <30% <31% Green Letters Single Face with Remote 9.5W 9.7W .09A .04A >.90 >.90 <26% <27%
Remote Powered - LED Exits
Red Letters Single Face Approximately 2.0 watts additional Green Letters Single Face Approximately 2.5 watts additional
ORDERING INFORMATION-REMOTE POWERED EXITS (Satellite, must be powered from another unit.)
SAMPLE NUMBER: TPX810000R
3/4"
(19mm)
8 1/4"
(210mm)
REMOTE POWERED
Faceplate Finishes Blank=Brushed
Aluminum Face with Black Trim
W=White B=Black BZ=Bronze
Factory Options 2C= Two Circuit
Operation
Family TPX=Thin Profile
Exit
Series 6=AC Only, LED
Face Options 1=Single
Battery 00=AC Only, 120/277 VAC
Factory Options 00=No Options 95=AC Only Fire
Alarm Interface
Letter Colors R=Red G=Green
Accessories (Order Separately) TPX61VS=Polycarbonate Vandal
Shield
0590A639SP=Tamper Resistant
Screwdriver Bit
Faceplate Finishes Blank=Brushed
Aluminum Face with Black Trim
W=White B=Black BZ=Bronze
Accessories (Order Separately) TPX61VS= Polycarbonate
Vandal Shield
0590A639SP= Tamper Resistant
Screwdriver Bit
Family TPX=Thin Profile
Exit
Series 8=Remote, LED
Face Options 1=Single
Battery 00=Remote Powered
Factory Options 00=No Options
Letter Colors R=Red G=Green
AC ONLY
• Dual-voltage input 120/277VAC, 60Hz
• Die cast aluminum faceplate
• Overall exposed exit thickness is only 3/4"
• LED lamping
• 20 gauge steel recessed housing fits in 2x4 construction
• 18 gauge steel mounting plate with universal mounting pattern
• Adjustable hanger bars
• Centerpin Torx tamper resistant screws on sides of faceplate – no visible mounting hardware on front face
• NFPA compliant knockout chevrons
• UL 924 Listed, Life Safety NFPA 101, NEC/OSHA, UL FTBR Listed (with “2C” option), UL Listed as suitable for floor proximity installation, most state and local codes
TPX SERIES
Die Cast AC Only
Thin Profile
EXIT LIGHTING
TPX
Page 2
639
EXIT SIGNS Architectural
COOPER LIGHTING
COOPER LIGHTING - SURE-LITES
®
• Dual-voltage input 120/277VAC, 60Hz
• Die cast aluminum faceplate
• Overall exposed exit thickness is only 3/4"
• LED Lamping
• Premium Nickel Cadmium battery
• 20 gauge steel recessed housing fits in 2x4 construction
• 18 gauge steel mounting plate with universal mounting pattern
• Centerpin Torx tamper resistant screws on sides of faceplate
• NFPA compliant knockout chevrons
• Adjustable hanger bars
• Line-latching, Solid-State voltage limited charger, Solid-State switching, low­voltage disconnect, brownout circuit, overload/short-circuit protection, test switch/ power indicator light
• UL 924 Listed, Life Safety NFPA 101, NEC/OSHA, UL FTBR Listed (with “2C” option), UL Listed as suitable for floor proximity installation, most state and local codes
DIMENSIONS
ORDERING INFORMATION
SAMPLE NUMBER: TPX717020RB
Energy Data
Standard Power - Sealed Nickel Cadmium Battery - LED Exits
Input Power; Input Current (Max.): Power Factor: T.H.D.:
120V 277V 120V 277V 120V 277V 120V 277V
Red Letters Single Face 7.4W 7.5W .08A .04A >.72 >.72 <34% <34% Red Letters Single Face with Remote 9.3W 9.5W .09A .04A >.84 >.84 <31% <32% Green Letters Single Face 8.5W 8.7W .09A .04A >.79 >.79 <30% <31% Green Letters Single Face with Remote 11.4W 11.7W .11A .05A >.90 >.90 <26% <26%
Standard Power with Self-Diagnostics Option ( Fully Discharged Battery) - LED Exits
Red Letters Single Face 8.4W 8.5W .08A .04A >.82 >.82 <31% <31% Red Letters Single Face with Remote 9.8W 9.5W .09A .04A >.86 >.84 <30% <30% Green Letters Single Face 9.1W 9.0W .09A .04A >.86 >.85 <27% <27% Green Letters Single Face with Remote 11.2W 10.5W .10A .05A >.90 >.88 <25% <26%
Standby Mode (Fully Charged Battery) Sealed Nickel Cadmium Battery Input Power consumption is reduced by
approximately 1.5 Watts in the standby operating mode
Faceplate Finishes Blank=Brushed
Aluminum Face with Black Trim
W=White B=Black BZ=Bronze
Factory Options SD= Self-Diagnostics
Family TPX=Thin Profile
Exit
Series 7=Self-Powered
Face Options 1=Single
Battery 70=Nickel Cadmium Battery
Factory Options 00=No Options 20=Flasher 30=Flasher/Buzzer 90=DC Fire Alarm
Interface
Letter Colors R=Red G=Green
Accessories (Order Separately) TPX71VS=Polycarbonate Vandal
Shield
0590A639SP=Tamper Resistant
Screwdriver Bit
13 5/8" (346mm)
10 3/4" (273mm)
3/4"
(19mm)
2 1/4"
(57mm)
8 1/4"
(210mm)
3/4"
(19mm)
2 1/4"
(57mm)
4 7/8"
(124mm)
DESCRIPTION
The TPX Thin Profile Exit Series combines the strength of die cast aluminum, the profile of recessed design and the superior aesthetics of Sure-Lites LED technology to create an exit with optimum versatility and aesthetics. The TPX Series faceplate assembly is only 3/4" thick, yielding a sign with minimal off-wall protrusion without requiring the large wall opening of a fully recessed exit.
The TPX Series also includes a Remote Powered Exit which can be powered from a TPX Series AC Only or Self-Powered Exit.
TPX SERIES
Die Cast
Self-Powered
Thin Profile
EXIT LIGHTING
TPX
Loading...