Cooper Lighting TFPC2000, TFP2000 User Manual
DESCRIPTION
Thermal
Protector
7.45”
5.69”
5.69”
12.01”
7.19”
16.14”
15.01”
7.19”
45º x 45º
Adjust
Double
Gimbal
An adjustable Single-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes ONE (1) PAR30 120V lamp.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75” flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” to 1.25” ceiling
thickness. Optional Chicago Plenum
configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling
not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
E ... Lamps
One (1) PAR30 120V lamp mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be regressed 1” for additional cut-off. Lamp can
accept up to three optical accessories (i.e.
lens + hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp
ring is secured with threadless, bayonet
action. Optional retractable arm is available
Catalog # Type
Project
Comments Date
Prepared by
for lamp pulldown and extreme aiming.
Includes med. base socket.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 6.49” x 6.49”
COMBOLIGHT®
Single-Lamp Fixture
w/ 0.75” Trim Flange
Next Generation
Recessed
One (1) Light
PAR30 120V
New Construction
Housing
For use with PAR30 120V lamps 75W max.
ORDERING INFORMATION
C1 N 120 T
Configuration
C1 = COMBOLIGHT
Recessed One (1) Light
www.cooperlighting.com
Lamp Type / Wattage Label
075P30 = 75 Watt max. PAR30 120V
Housing
N = New Construction
C = Chicago Plenum
Power Supply
N = None - Line Voltage Lamp
Primary Voltage
1 = 120V
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75” Trim Flange
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 072908
Loading...