04/10/2007 9:39:52 AM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
The TF28 fixture is designed for the most demanding and complex
environments your application has to offer. One-piece seam-welded
construction and energy efficient lamp technology make this fixture an ideal
candidate for applications ranging from the most hostile to the most fragile
environments. The TF28 provides a durable and long life installation. Long
lamp life means less re-lamping and less maintenance costs resulting in a
big payback. A durable and anti-corrosive construction ensures that your
investment is protected as expected through the end. UL listed and IP 65
(To be specified.) Choice of glass
or polycarbonate; prismatic for
glare control or clear. Consult
Available in die-formed 14 gauge
cold rolled steel, 14 gauge 304
brushed stainless steel or 1/8" thick
aluminum. Housing is continu-
ously welded with ground ends to
form a one-piece seamless
resistance to the environment.
Specify aluminum construction for
high ambient applications.
Material to match housing. Seam
welded with ground corners.
Aircraft grade safety cable lanyards
attaches doorframe to housing.
One-piece die-cut EPDM closed cell
sponge with pressure sensitive
Stainless steel captive Philips Head
screws are used to fasten door-
Polyester powder coat finish is
doorframe. Available colors are
utility gray, architectural bronze,
white or specify color. Paint
application is conveyorized, has a
multi-stage cleaning cycle, electro
statically applied, control baked
Interior reflector is segmented,
95% specular aluminum and
scientifically designed for
150W Induction Icetron(TM) Lamp
installed and fully secured in unit.
All fixtures are 100% factory tested
before shipping for quality
High power factor, Universal 120V
Aluminum cast and fully sealed
wiring box fastened with through
bolts on exterior of unit. Supplied
with (4) 3/4" pipe threaded conduit
Surface mounted with bolts
through (4) exterior welded
CUL Listed for Wet Locations.
Optional high-pressure hose down
available. High ambient rating is
SURFACE MOUNT
TRANSIT AND COMPLEX
ENVIRONMENT
LUMINAIRE
31 13/16”
[808mm]
9 15/16”
[253mm]
27 7/8”
[708mm]
(8) 9/16” X 1 1/2”
[14mm X 38mm]
Mtg. Holes
17 5/8”
[448mm]
30”
[762mm]
30”
[762mm]
17 5/8”
[448mm]
31 13/16”
[808mm]
27 7/8”
[708mm]
E N E R G Y D AT A
Input Watts:
(1) 150W Icetron™: 157
W
Specifications and Dimensions subject to change without notice.
C and l e p o we r D i st r i b u ti o n
Z ona l L u me n S u mm a r y
Zone Lumens %Lamp %Luminaire
0-30 3117 26.0 34.3
0-40 4818 40.2 53.0
0-60 7716 64.3 84.9
0-90 9091 75.8 100.0
90-180 0 0.0 0.0
0-180 9091 75.8 100.0
80% 70% 50% 30% 10% 0%
70 50 30 10 50 30 10 50 10 50 10 50 10 0
90 90 90 90 88 88 88 84 84 81 81 77 77 77
83 80 77 75 78 76 73 75 71 72 69 70 67 65
76 71 66 62 69 65 61 67 60 64 59 62 57 56
70 63 57 53 62 57 52 60 51 58 50 56 50 48
65 56 50 45 55 50 45 54 45 52 44 50 43 42
60 51 44 40 50 44 40 48 39 47 39 46 38 37
56 46 40 35 45 39 35 44 35 43 34 42 34 33
52 42 36 31 41 36 31 40 31 39 31 38 31 29
48 39 33 28 38 32 28 37 28 36 28 35 28 26
45 36 30 26 35 30 26 34 26 34 25 33 25 24
43 33 27 24 33 27 23 32 23 31 23 31 23 22
rc=Ceiling reflectance, rw=Wall reflectance, RCR=Room cavity ratio
CU Data Based on 20% Effective Floor Cavity Reflectance.
Test No. TF28150ICE24093
Lamp= 150W Icetron™
Lumens= 12,000
Efficiency= 75.8%
rc
rw
RCR
0
1
2
3
4
5
6
7
8
9
10
C oef f i c ien t o f U t i l i za t i o n
C and l e p o we r
Deg.
0 4522 4522
5 4510 4464
15 4002 4106
25 3294 3421
35 2648 2779
45 1992 2129
55 1401 1475
65 840 904
75 365 385
85 50 44
90 0 0
90
90
180
4522
3391
2261
1130
Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
04/10/2007 9:39:52 AM
ADC041739