Cooper Lighting T6 G12 User Manual

DESCRIPTION
9.95”
9.45”
Required
above ceiling
45º x 45º
Adjust
Double Gimbal
6.69”
Thermal Protector
Perforated Meshplate
6.69”
1.70”
18” flexible conduit
Separate Wiring Compartment
9.25”
12.33”
Integral Electronic
Metal Halide Ballasts
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes THREE (3) T6 G12 Metal Halide lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least 1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/ plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are mounted in a separate metal enclosure box attached to the junction box with 18” of flexible conduit. Ballast enclosure includes a separated wiring compartment and two knockouts for conduit entry and features a perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and ballast enclosure) is removable from the housing for easy maintenance.
E ... Lamps
Three (3) T6 G12 Metal Halide lamps with reflectors mounted in adjustable double gimbal. Lamp holders are removable and may be regressed 1” for additional cut-off. Lamps can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking lamp adjust­ment. Beveled-edge lamp ring is secured with threadless, bayonet action. Optional
Catalog # Type
Project
Comments Date
Prepared by
retractable arm is available for lamp pulldown and extreme aiming. Includes G12 sockets.
F ... Mounting
A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws.
G ... Labels
cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 7.94” x 21.16”
COMBOLIGHT®
Multi-Lamp Fixture
T6 G12 Metal Halide
Next Generation
Recessed
Three (3) Light
Remodel Housing
Trimless
Power Supply Voltage 1 = 120V 2 = 277V
Ballast
Lamp Mechanism G = Double Gimbal R = Retractable Double Gimbal
Trim Insert N = Trimless
Housing Interior/Electrical Door /Sleeve Finish W = White B = Black S = Industrial Silver
T6 G12 Lamp with Reflectors
This fixture utilizes T6 Metal Halide lamp and includes high­performance clear aluminum reflectors in narrow, medium, or wide distributions. Non-standard color reflectors are available upon request.
ORDERING INFORMATION
C3 R E N N
Configuration
=
C3
COMBOLIGHT
Recessed Three (3) Light Square
Housing R = Remodel
www.cooperlighting.com
Lamp Type / Wattage Label / Reflector Type 070T6N = 70 Watt T6 G12 Metal Halide / Narrow 070T6M = 70 Watt T6 G12 Metal Halide / Medium 070T6W = 70 Watt T6 G12 Metal Halide / Wide
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Power Supply E = Electronic Metal Halide
Trim Finish N = Trimless
rev 050108
Loading...