Cooper Lighting T5HO54, T5HO39, CR11650, CR17050, CR11675 User Manual

Catalog #

Type

Project

COMBOLIGHT® COMBO CLASSIC RECESSED

LAMP GROUP 1 - CONFIGURATION “D”
TWO (2) Halogen lamp cells - TWO (2) Fluorescent lamp cells
New Construction Recessed Housing - Trim or Trimless

ORDERING EXAMPLE:

= Two MR16 50W lamps with Two BIAX® 40W Fluorescent • Double Wide • • Black Interior • White Trim • 120 volts

CR11650 D BX40 BK WH 120

Fluorescent >> BX40 BX50 PLL80 PLT26 PLT32 PLT42 T528 T535 T5HO39 T5HO54

Lamp Group 1

A

59.78” 59.78” 59.78” 24.78” 25.78” 27.78” 106.78” 130.78” 82.78” 106.78”

B

71.58” 71.58” 71.58” 35.58” 40.08” 39.58” 118.58” 142.58” 94.58” 118.58”

C

25.50” 25.50” 25.50” 8.00” 8.50” 9.50” 49.00” 61.00” 37.00” 49.00”

RSA LIGHTING®

RSA LIGHTING LLC 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311

TOLL FREE: 800-356-3030 • 818-349-3030 • FAX: [phone] • www.rsalighting.com

©2003 RSA Lighting LLC All Rights Reserved • Specifications subject to change without notice.

SPECIFY -

D

Optional Accessories - See RSA Combo Classic accessory page for details.

Baffle Snoots Louvers Lenses

Fluorescent Diffusers and Louvers - Please specify

❑ TWD - Textured White Diffuser ❑ CB1 - 2” Parabolic Louver
❑ MPD - Conical Prism Diffuser ❑ CB2 - 1” Parabolic Louver

Custom configurations are available with Combo Classic fixtures.
Also available with T8 fluorescent lamps. Consult RSA for details

DESCRIPTION:

An adjustable recessed fixture
suitable for multiple downlighting
applications with one point of elec­trical entry. Mixes the use of low
voltage halogen lamps with fluo­rescent lamps. Powder coat finish
on housing & lamp assembly.

CONSTRUCTION:

Housing, Plaster Frame & Trim
Assembly: 18 gauge CRS. J-Box
Assembly: 16 gauge CRS (galva­nized). Fixture is offered with a .75”
ceiling trim or as a trimless fixture.
Can accommodate 0.50” to 1.00”
ceiling thickness.

LAMP ASSEMBLY:

Two low voltage halogen lamp
cells with two fluorescent lamp
cells . Can accept up to two optical
accessories. 380º x 45º locking
lamp adjustment. Provides 45º
visual cut-off.

SYSTEM PROTECTION:

Thermal protection provided to
guard against overheating, and
misuse of insulation over and
around fixture. Vent holes in hous­ing provide cooler operation

ELECTRICAL:

Fixture is two circuit.
Circuit 1: Integral electronic trans­former for low voltage lamps.
Fused and short circuit protection.
Dimmable.

Circuit 2: Integral electronic bal­lasts for fluorescent lamps.

Lutron® dimming ballasts avail­able upon request.

Junction box is UL listed for
through branch wiring, for 8 #12,
90°C supply conductors or 60°C for
end of run (access above ceiling
not required).

Made in the USA.

Item # / Lamp Type Configuration Fluorescent Lamp Cell Interior Finish Trim Finish Volt age

Lamp
Group 1

CR11650 - MR16 12V 50W

D - Two Low Voltage Halogen

lamp cells with Two
Fluorescent lamp cells

BX40 - 40W BIAX® BK - Black BK - Black 120 - 120 Volts

CR11675 - MR16 12V 75W

BX50 - 50W BIAX® WH - White WH - White 277 - 277 Volts

CR17020 - AR70 12V 20W

PLL80 - 80W PL-L S - Silver S - Silver

CR17050 - AR70 12V 50W

PLT26 - 26W PL-T PT - Custom PT - Custom
PLT32 - 32W PL-T TR - Trimless
PLT42 - 42W PL-T
T528 - 28W T5
T535 - 35W T5
T5HO39 - 39W T5HO
T5HO54 - 54W T5HO

T8 lamps also available

___

___

___

___

___

6.88"

6.00"

A

T

I

E

L

D

M

I

R

T

4.30"

Dual Fluorescent lamp cells
w/ integral ballast accessible
from below

Integral reflector Integral reflector

CC

L

M

E

I

R

T

0.75" Trim

Ballast Ballast

S

S

D

E

T

A

I

L

Ceiling compund
is applied right
to the edge of the
fixture opening

4.20"

A

B

Must specify a diffuser or louver

for fluorescent cell. See below.

4.20"

Electronic
Low Voltage
Transformers

Thermal Protector

380º x 45º locking
angular adjustment
45º visual cut-off

Butterfly
Brackets
for Black Iron
Mounting