Cooper Lighting T4 GU6.5 User Manual
DESCRIPTION
Thermal
Protector
Separate Wiring Compartment
18” flexible conduit
4.65”
18.58”
19.41”
29.08”
21.38”
7.95”
9.27”
10.96”
4.65”
1.60”
9.25”
16.44”
7.45”
Required
above
ceiling
Integral Electronic Metal
Halide Ballasts
45º x 45º
Adjust
Double
Gimbal
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FOUR (4) T4 GU6.5 Metal Halide
(GE® Constant Color Super Mini) lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.
E ... Lamps
Four (4) T4 GU6.5 Metal Halide lamps
with reflectors mounted in adjustable
double gimbal. Lamp holders are removable and may be regressed 1” for additional cut-off. Lamps can accept up to
three optical accessories (i.e. lens + hex
louver + snoot). 45º x 45º locking lamp
adjustment. Beveled-edge lamp ring is
secured with threadless, bayonet action.
Catalog # Type
Project
Comments Date
Prepared by
Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes GU6.5 TAL sockets.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.90” x 19.67”
COMBOLIGHT®
Multi-Lamp Fixture
T4 GU6.5 Metal Halide
Next Generation
Recessed
Four (4) Light
Remodel Housing
Trimless
T4 GU6.5 Lamp with Reflectors
This fixture utilizes the GE® SuperMini Constant Color
Lamp and includes high-performance clear aluminum
reflectors in narrow, medium, or wide distributions. Nonstandard color reflectors are available upon request.
ORDERING INFORMATION
C4 R E N N
Configuration
C4 = COMBOLIGHT
Recessed Four (4) Light
Square
www.cooperlighting.com
Lamp Type / Wattage Label / Reflector Type
020MCN = 20 Watt T4 GU6.5 SuperMini Narrow
020MCM = 20 Watt T4 GU6.5 SuperMini Medium
020MCW = 20 Watt T4 GU6.5 SuperMini Wide
Housing
R = Remodel
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Power Supply
Voltage
1 = 120V
2 = 277V
Power Supply
E = Electronic Metal Halide
Ballast
Trim Insert
N = Trimless
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
Trim Finish
N = Trimless
rev 022408
Loading...