Cooper Lighting SVA1500 User Manual

FAIL-SAFE

C

CLEANROOM

®

DIMENSIONS

MOUNTING

ABC

CFAT5 2' 1 1/2" 4 3/16" 24"

CFAT5 3' 1 1/2" 4 3/16" 36"

CFAT5 4' 1 1/2" 4 3/16" 48"

CFAT5 5' 1 1/2" 4 3/16" 60"

CFAT5 8' 1 1/2" 4 3/16" 96"

ORDERING INFORMATION

SAMPLE NUMBER: CFAT5-121-120-CLR-EB51

(38mm) (106mm) (610mm)

(38mm) (106mm) (914mm)

(38mm) (106mm) (1219mm)

(38mm) (106mm) (1524mm)

(38mm) (106mm) (2438mm)

DESCRIPTION

The Fail-Safe CFAT5 Series is
designed for use in vertical,
laminar air flow cleanrooms.
The narrow, airfoil design
minimizes turbulence in clean­rooms that require a uni­directional air flow. The
corrosion resistant extruded
aluminum housing is enclosed
and gasketed and measures
1 1/2" in width to allow
mounting to a matching 1 1/2"
tee-bar. The lens utilizes internal
refractors providing concise
optical control while providing a
smooth environmental side. The
lens gasketing seals the lens to
end cap, preventing
entrapment of biohazardous
contaminants which could
inhabit the fixture. A removable
power tray facilitates quick and
easy maintenance and
installation. These luminaires
are U.L. listed and C.S.A.
certified for damp locations and
are manufactured in accordance
with U.S.D.A., F.D.A., N.S.F. and
Federal Standard 209E. The
CFAT5 Series is suitable for use
in I.E.S. Class 1 (M1.5), 10
(M2.5), 100 (M3.5), 1,000 (M4.5),
10,000 (M5.5) and 100,000
(M6.5) cleanroom
environments.

CFAT5

14W-132W

FLUORESCENT LAMINAR

FLOW TEARDROP

2', 3', 4', 8'*

• Lens is one-piece,
extruded, prismatic acrylic
lens with internal
horizontal prism pattern.
Choice of clear ribbed
diffuser, opal ribbed
diffuser or yellow, ultra
violet lens. See Lens
Options

• Extruded anodized
aluminum channel.
Stainless steel end cap
secured to channel with
stainless steel screws
(flush). Standard white
high reflectance polyester
powder coat finish on
reflector

Product Family
CFAT5=Extrude

d Aluminum
Fluorescent
Laminar Flow
Teardrop
with T5 lamp

Notes: For additional options, consult your Cooper Lighting Representative. Specifications and Dimensions subject to change
without notice. Electronic ballast may cause interference with other electronic devices. If interference occurs, move the device
away from the product or plug/connect into a different circuit/outlet.

1

For specific electronic ballast, specify brand and catalog number.

2

Requires minimum order; consult Customer Service.

Lamp Type
2' Length
114=(1) 14W Lamp
124=(1) 24W HO Lamp

3' Length
121=(1) 21W Lamp
139=(1) 39W HO Lamp

4' Length
128=(1) 29W Lamp
154=(1) 54W HO Lamp

5' Length
135=(1) 35W Lamp

9' Length
228=(2) 28W Lamps

Voltage
120=120V
277=277V
347=347V
UNV=120V

through
277V

Lens Type
CLR=Clear, Ribbed

Diffuser

2

=Opal, Ribbed

OPL

Diffuser

2

=Ultra Violet,

UVY

Yellow Lens

1

Ballast
EB51=(1) Ballast for use

with T5 Lamp

EB52=(2) Ballasts for use

with T5 Lamp

Options
GLR=Fuse and

EBP=Emergency

Holder

Battery Pack

• Lamps by others

• Standard Class P, CBM/ETL
ballast

• Gray closed cell gasketing
seals lens to endcaps

• Drill guide for the addition
of holes where needed for
top mounting and electrical
access

• Removable modular tray
constructed of 18 ga. cold
rolled steel. Quick
disconnect wiring for
convenient installation and
maintenance

• U.L. Listed, C.S.A. certified,
standard damp label

COOPER LIGHTING

1477