Cooper Lighting SSA User Manual
178 STREETWORKS Outdoor Lighting Solutions Cooper Lighting
8'—35' MOUNTING HEIGHT
SSA SQUARE STRAIGHT ALUMINUM
POLES
1
...
356-T6 cast aluminum alloy shoe base with aluminum
alloy knock-in bolt covers.
2
...
2" x 4" flush hand hole assembly with internal reinforcing
frame (4" Shaft). 2 1/2" x 4" flush hand hole assembly
(5", 6", and 6 3/4" shaft). Ground lug located opposite
hand hole opening drilled & tapped for 3/8" 16NC-2
grounding screw.
3
...
Straight square shaft 6005-T6 aluminum alloy polished
finish.
4
...
Drilled or Tenon (specify).
5
...
Anchor bolt per ASTM A576 with (1) nut, (1) flat washer,
and (2) shims. Nuts, washers and threaded portion of bolt
are hot dip galvanized.
SPECIFICATION FEATURES
FOUR BOLT ANCHORAGE [See ordering information]
BC=Bolt Circle
BP=Bolt Projection
AB=Bolt Dimensions
D=Bolt Diameter
H=Bolt Dimensions
FINISH COLORS [See ordering information. Other finish colors available.]
B=Clear Anodized
C=Dark Bronze Anodized
D=Black Anodized
E=Medium Bronze Anodized
F=Dark Bronze Powder Coat
V=Grey Powder Coat
W=White Powder Coat
X=None (natural aluminum)
Y=Black Powder Coat
5
1
2
3
4
ACCESSORIES [Base with hand hole and door]
WARNING: THE USE OF UNAUTHORIZED ACCESSORIES SUCH AS BANNERS, SIGNS OR PENNANTS FOR WHICH THE POLE WAS NOT DESIGNED FOR VOIDS THE COOPER LIGHTING
WARRANTY AND MAY RESULT IN POLE FAILURE CAUSING SERIOUS INJURY OR PROPERTY DAMAGE. COOPER LIGHTING'S POLE WARRANTY IS ALSO VOIDED IF
LUMINAIRE IS NOT INSTALLED AT TIME OF POLE INSTALLATION.
MH
(mounting height)
B
S
handhole
12 5/16 "
Base View
BC
Bolt cover (shown in place)
flush with casting surface
Bolt cover at
all four anchor
bolt locations
(force fit)
D
BP
AB
H
STREETWORKS Outdoor Lighting Solutions 179Cooper Lighting
SQUARE STRAIGHT ALUMINUM POLES
Shaft Mounting Fixture No. & Accessories
Dia. Wall Height Base Mounting Location Arm (Ground
Square Straight Aluminum (at base) Thickness (Ft.) Type Finish & Type of Arms Lengths Lug)
SS A 4 T 08 W X M 1 XG
Bolt
Mtg. Shaft Wall Bolt Circle Anchor Bolt Net. Max. Fixture
Height Catalog Size Thickness Proj. Dia. D x AB x H Wt. EPA (Sq. Ft.)
2, 4
EPA (Sq. Ft.)
2, 4
Load—Include
(Ft.) Number
3
(In.) (In.) (In.) (In.) (In.) (Lbs.) At Pole Top 18" Above Pole Top Bracket (Lbs.)
MH B BP BC AB 70 80 90 100 70 80 90 100
8 SSA4T08WX 4 .125 1 3/4 9 3/4 x 17 x 3 23 25.0 18.6 14.0 10.7 21.0 15.5 11.6 8.9 350
10 SSA4T10WX 4 .125 1 3/4 9 3/4 x 17 x 3 28 19.0 13.7 10.0 7.3 16.5 11.8 8.6 6.3 260
12 SSA4T12WX 4 .125 1 3/4 9 3/4 x 17 x 3 32 24.0 17.5 13.2 10.0 20.8 15.2 11.3 8.6 260
15 SSA4T15WX 4 .125 1 3/4 9 3/4 x 17 x 3 39 12.9 8.9 6.1 4.2 11.3 7.8 5.4 3.7 200
15 SSA4M15WX 4 .188 1 3/4 9 3/4 x 17 x 3 55 20.7 15.0 11.0 8.1 18.5 13.0 9.7 7.2 200
15 SSA5T15WX 5 .125 2 11 3/4 x 17 x 3 52 23.0 16.4 11.7 8.5 20.3 14.5 10.5 7.6 260
18 SSA4T18WX 4 .125 1 3/4 9 3/4 x 17 x 3 46 8.3 5.1 2.9 1.3 7.6 4.6 2.6 1.2 100
18 SSA4M18WX 4 .188 1 3/4 9 3/4 x 17 x 3 66 14.3 9.7 6.5 4.2 13.0 8.8 5.9 3.8 150
18 SSA5T18WX 5 .125 2 11 3/4 x 17 x 3 61 15.9 10.5 6.9 4.3 14.4 9.5 6.2 3.9 150
18 SSA5M18WX 5 .188 2 11 3/4 x 17 x 3 85 25.6 18.2 13.0 9.2 23.5 16.4 11.6 8.3 260
20 SSA4M20WX 4 .188 1 3/4 9 3/4 x 17 x 3 72 11.0 6.9 4.1 2.1 10.0 6.3 3.7 1.9 150
20 SSA5T20WX 5 .125 2 11 3/4 x 17 x 3 66 12.3 7.5 4.2 1.9 11.1 6.8 3.9 1.7 100
20 SSA5M20WX 5 .188 2 11 3/4 x 17 x 3 94 21.0 14.3 9.7 6.3 19.5 13.2 8.8 5.8 150
25 SSA5M25WX 5 .188 2 11 3/4 x 17 x 3 115 11.6 6.5 2.8 -- 10.8 6.0 2.6 -- 100
25 SSA6M25WX 6 .188 2 12 1/2 1 x 36 x 4 140 21.5 13.4 7.6 3.4 20.0 12.4 7.1 3.4 260
30 SSA6X30WX 6 .250 2 12 1/2 1 x 36 x 4 215 18.7 10.8 5.4 1.5 17.6 10.0 5.0 1.4 260
30 SSA9X30WX 6 3/4 .250 2 3/4 14 1/4 1 x 36 x 4 237 30.0 19.0 11.6 6.2 28.0 18.0 11.0 6.0 260
35 SSA6X35WX
1
6 .250 2 12 1/2 1 x 36 x 4 249 11.9 4.9 -- -- 11.0 4.5 -- -- 100
35 SSA9X35WX16 3/4 .250 2 3/4 14 1/4 1 x 36 x 4 274 17.5 8.6 2.5 -- 16.7 8.3 2.3 -- 150
NOTES: 1 Factory installed vibration dampeners.
2 The above E.P.A. capacities are based on loading from (1994) and pole drag coefficients from (2001) American Association of State Highway and Transportation Officials Specification.
3 Catalog item includes one set of anchor bolts, single nuts and (2) leveling shims.
4 EPAs based on shaft properties with wind normal to flat. EPAs calculated using base wind velocity as indicated plus 30% gust factor.
MACHINING FOR RECTANGULAR ARMS [Add as suffix]
Designation Designation Designation Quantity
Letter & Number Letter & Number Letter & Number & Location
M1 E1 Z1 Single
M2 E2 Z2 2 @ 180°
M3 E3 Z3 3 @ 120°
M4 E4 Z4 4 @ 90°
M5 E5 Z5 2 @ 90°
NOTES: Refer to Fixture Drilling Options on page 160.
ACCESSORIES
A=1/2" tapped hub
1
B=3/4" tapped hub
1
G=Grounding lug (max. wire #8 AWG)
H=Additional hand hole and cover—
12" below pole top—90° from hand hole.
V=Vibration Damper
NOTES: 1 Location is 3' above base–90° from hand hole.
MOUNTING OPTIONS [Add as suffix]
Fixed Tenon Designation O.D. Length
Number (In.) (In.)
2 2 3/8 4
534
446
DRILLING PATTERN
Type “M” [RCL, Landau, Galleria and Vision] Type “E” [Concourse III] Type “Z” [Credenza and Cirrus]
9/16" [14mm]
dia. hole (3)
4 7/8" [124mm]
4" [102mm]
2 7/16" [62mm]
ORDERING INFORMATION
SAMPLE NUMBER: SSA4T08WXM1XG
NOTE: Specifications and dimensions subject to change without notice.
2 13/16''
7/8''
3 7/8''
3/4'' dia.
hole
(2) 3/8"
dia. holes
2 7/16''
2 5/16''
4 7/8''
3/4'' dia.
hole
(2) 5/8''
dia. holes
O.D.
LENGTH
Loading...