Page 1
FAIL-SAFE
B
C
B
A
CLEANROOM
SCG
SCH
34W-160W
Fluorescent
1' x 2', 1' x 4', 2' x 2', 2' x 4'
SPECIFICATION GRADE
FLUORESCENT GRID
1", 1-1/2" or 2" Grid
• Lens is clear extruded with
prisms positioned inside
fixture and smooth surface
on the outside for easy
cleaning
• Flush mounted, stainless
steel machine screws
®
The Fail-Safe SCG12, SCG24
and SCH24 Series are designed
for use in horizontal or nonlaminar air flow clean rooms
and features the added
convenience of field retrofitting
for flange or grid
installations.The enclosed and
gasketed housing and door
protect against infiltration of
airborne bacteria. Fixtures
tested to 100 PSI hose down.
Higher ratings available
(consult factory). The mitered
edges on the door frame and
the hole-free design of the
housing prevent air exchange
between the fixture and
plenum, allowing relamping
without contamination of the
clean areas. An emergency
battery pack is available as an
option. Fixtures are U.L. listed
and C.S.A. standard wet label.
These luminaires are
manufactured in accordance
with U.S.D.A., F.D.A., N.S.F. and
Federal Standard 209E. The
SCG12 Series is suitable for use
in I.E.S. Class 10 (M2.5), 100 (M
3.5), 1,000 (M 4.5), 10,000 (M
5.5) and 100,000 (M 6.5) clean
room environments.
DIMENSIONSDESCRIPTION
B
MOUNTING
C
AB C
SCG12 5" 11 11/16" 24"
1'x 2' (127mm) (297mm) (610mm)
SCG12 5" 11 11/16" 48"
1'x 4' (127mm) (297mm) (1219mm)
SCG24 4 1/4" 23 11/16" 24"
2'x 2' (108mm) (602mm) (610mm)
SCG24 4 1/4" 23 11/16" 48"
2'x 4' (108mm) (602mm) (1219mm)
SCH24 5" 23 3/16" 24"
2'x 2' (127mm) (589mm) (610mm)
SCH24 5" 23 3/16" 48"
2'x 4' (127mm (589mm) (1219mm)
DOOR FRAME
B
Extruded aluminum
mitered door frame and
housing trim flange with
extruded silicone rubber
perimeter gasketing
A
One piece stainless steel
door frame and housing
trim flange with extruded
closed cell silicone
perimeter gasketing
• Nominal 4-1/4" (SCG24) or
5" (SCG12/SCH24) deep
recessed one-piece 20 ga.
CRS housing
• Unique, Particulock™ lens
retention system. Lens is
hermetically sealed to door
frame
• Optional extruded
aluminum, mitered, fully
gasketed, outside flanged
door; or one-piece, dieformed stainless steel door
• Standard Class P, CBM/ETL
ballast
TM
• MicroSeal
gasketing
system features silicone
RTV sealant sealing lens to
door frame and extruded
silicone rubber gasketing
seals door to ceiling. White,
closed cell Flexiseal™ seals
fixture to ceiling
• Gasketed access plate with
two flattened, 7/8" diameter
knockouts
ORDERING INFORMATION
SAMPLE NUMBER: SCG-24-340-277-IK12-LE3-ALP-GLR
Series
SCG=Specification
Grade
Cleanroom Grid
Type
SCH=Specification
Grade
Cleanroom
Heavy Grid Type
Lamp Type
24" Fixture Length
T8 Fluorescents
117=(1) 17W Lamp
217=(2) 17W Lamps
317=(3) 17W Lamps
417=(4) 17W Lamps
T12 Fluorescents
120=(1) 20W Lamp
220=(2) 20W Lamps
320=(3) 20W Lamps
420=(4) 20W Lamps
U Lamps*
2U 1 5/8=(2)31W T8
Lamps
3U 1 5/8=(3) 31WT8
Lamps
2U6T8=(2) 32WT8 Lamps
2U6=(2)40WT12Lamps
Width
12=12"
24=24"
Biaxial Fluorescents
140BX=(1) 40W Lamp
240BX=(2) 40W Lamps
340BX=(3) 40W Lamps
48" Fixture Length
T8 Fluorescents
132=(1) 32W Lamp
232=(2) 32W Lamps
332=(3) 32W Lamps
432=(4) 32W Lamps
T12 Fluorescents
140=(1) 40W Lamp
240=(2) 40W Lamps
340=(3) 40W Lamps
440=(4) 40W Lamps
Voltage
120=120V
277=277V
347=347V
UNV=120V
through
277V
Lens Type
IK12=K-12
IP12=K-12
KSH25
93=Prismatic
Prismatic
Acrylic
Prismatic
Polycarbon
ate
1
=Bat
Wing
Distributi
on
Tempered
Glass
Ballast
LE3=Energy
Saving
Ballast
Electronic
2
Ballast
EB81=(1) Ballast
for use
with T8
Lamp
EB82=(2) Ballasts
for use
with T8
Lamp
EB21=(1) Ballast
for use
with T12
Lamp
EB22=(2) Ballasts
for use
with
T12Lamp
EBX1=(1) Ballast
for use
with
Biaxial
Lamp
EBX2=(2) Ballasts
for use
with
Biaxial
Lamp
Door/Finish Options
ALP=Aluminum
Door & Trim,
Polyester
Powder Finish
ALX=Extruded
Aluminum
Door & Trim,
Clear Anodized
Finish
ALXP=Extruded
Aluminum
Door & Trim,
Polyester
Powder
Finish
(Standard)
Options
EBP=Emergency
Battery Pack
GLR=Fuse and
Holder
RIF=Radio Frequency
Interference
Filter
Housing Options
SHN=Stainless Steel,
Brushed 304
Finish
SHP=Stainless Steel,
Polyester
Powder Finish
ALH=Aluminum,
Polyester
Powder Finish
1488
COOPER LIGHTING
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and Dimensions subject to change without
notice.
1
The KSH25 provides improved visual performance and wide angle distribution. This lens has an integral prism pattern designed so that
prisms face the lamp cavity and still supply superior photometrics. Highly recommended for all high tech manufacturing environments.
2
For specific electronic ballast, specify brand and catalog number.
Loading...