Cooper Lighting RLM User Manual

COOPER LIGHTING - SURE-LITES

RD SERIES

Two Injection Molded

EMERGENCY LIGHTS Architectural

Thermoplastic Heads

RLM SERIES

Two High-Impact Thermoplastic Heads

Recessed Housing

EMERGENCY LIGHT

• Dual-voltage input 120/277VAC, 60Hz

• 20 gauge die-formed steel housing with white powder coat ﬁnish

• Heads match housing ﬁnish

DESCRIPTION

The RD Series is a recessed emergency lighting system designed for locations where aesthetics are of utmost

DIMENSIONS

4 5/8"

(118mm)

8 1/4" (210mm)

3 1/2"

(89mm)

(152mm)

(RD4 Only)

importance. The housing is fully recessed in dry wall or grid ceiling installations. Designer pinchback heads rotate 358° and swivel 90° to 0°. Ideal for commercial and institutional environments where easy recessed installation and minimal

6 1/4" (159mm)

9 1/4" (235mm)

5 1/8" (130mm)

10 1/4" (260mm) 12 7/8" (327mm)

7" max.

(178mm)

maintenance are desired.

The RLM Series is a recessed

8 1/4"

(210mm)

4 5/8"

(118mm)

system packaged in an attractive ﬂame-resistant metal housing. It is the unit of choice for installations where a recessed product is

3 1/2"

(89mm)

(RLM4 Only)

(152mm)

9 1/4"

(235mm)

desired and the size and cost of emergency lighting must be kept to a minimum without sacriﬁcing dependability or light output.

ELECTRICAL RATINGS

Model Battery DC Voltage 1 1/2 hours 2 hours 3 hours 4 hours Type Wattage Number

RD1 SLC 6 18 15 10 8 Tungsten Halogen 6 29-12 RD3 SLC 6 27 24 18 14 Tungsten Halogen 12 29-66 RD4 SLC 12 54 - - - Incandescent 9 029-86 RD6 SNC 6 15 12 8 6 Tungsten Halogen 6 29-12 RD7 SNC 6 24 18 12 10 Tungsten Halogen 12 29-66 RLM1 SLC 6 10.8 7.2 - - Incandescent 5.4 29-121 RLM2 SLC 6 18 15 10 8 Incandescent 9 29-84 RLM3 SLC 6 27 24 18 14 Incandescent 9 29-84 RLM4 SLC 12 54 - - - Incandescent 9 029-86 RLM8 SNC 6 15 12 8 - Incandescent 7.2 29-88 RLM9 SNC 6 24 18 12 10 Incandescent 7.2 29-88

SLC=Sealed Lead Calcium Battery SNC=Sealed Nickel Cadmium Battery

ORDERING INFORMATION

SAMPLE NUMBER: RD1V

Rated Wattage to 87 1/2% of rated D.C. Voltage Lamp Information

5 1/8"

(130mm)

10 1/4" (260mm)

12 7/8" (327mm)

6 1/4"

(159mm)

9 1/4" (235mm)

• Knockout, conduit or cord set

• Supplied with hanger bars, T-Bar clips

• Single modular electrical connector

• Remote capability

• Line-latching, Solid-State voltage limited charger, Solid-State switching, low- voltage disconnect, brownout circuit, overload/short-circuit protection, test switch/power indicator light

• UL 924 Listed, Life Safety NFPA 101, NEC/OSHA, most state and local codes

COOPER LIGHTING

606

Model Number RD1 RD3 RD4 RD6 RD7 RLM1 RLM2 RLM3 RLM4 RLM8 RLM9

Energy Data

Options

(Add as sufﬁx)

A=Ammeter SD=Self-Diagnostics TDM=Time Delay Monitor V=Voltmeter Alternate Lamps Other Options

(2)

(1)

Input Current (Max.):

Model No. 120V 277V

RD1, RD3 .12A .05A

RD4, RLM4 .30A .13A RD6 .06A .03A

RD7 .07A .04A

RLM1, RLM2, RLM3 .12A .05A

RLM8 .06A .03A RLM9 .07A .04A

(1)

Consult your Cooper Lighting Representative.

Accessories

(Order separately)

WG2 =Wire Guard WG7 =Wire Guard VS=Choose polycarbonate

(1)

(2)

Provision for one meter only.

vandal shield desired from accessories sheet