Cooper Lighting Recessed Multi-Lamp Fixture User Manual
DESCRIPTION
Thermal
Protector
18” flexible conduit
33.44”
34.27”
34.94”
36.24”
9.95”
11.31”
8.19”
6.69”
1.70”
9.45”
Required
above
ceiling
45º x 45º
Adjust
Double
Gimbal
Separate Wiring Compartment
9.25”
20.55”
Integral Electronic
Metal Halide Ballasts
6.69”
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FIVE (5) T6 G12 Metal Halide
lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder coated
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
the inner hardware of the fixture from sight
below the ceiling. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.
E ... Lamps
Five (5) T6 G12 Metal Halide lamps with
reflectors mounted in adjustable double
gimbal. Lamp holders are removable
and may be regressed 1” for additional
cut-off. Lamps can accept up to three
optical accessories (i.e. lens + hex
louver + snoot). 45º x 45º locking lamp
Catalog # Type
Project
Comments Date
Prepared by
adjustment. Beveled-edge lamp ring is
secured with threadless, bayonet action.
Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes G12 sockets.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 7.94” x 34.53”
COMBOLIGHT®
Multi-Lamp Fixture
T6 G12 Metal Halide
w/ 0.75” Trim Flange
Next Generation
Recessed
Five (5) Light
Remodel Housing
T6 G12 Lamp with Reflectors
This fixture utilizes T6 Metal Halide lamp and includes highperformance clear aluminum reflectors in narrow, medium,
or wide distributions. Non-standard color reflectors are
available upon request.
ORDERING INFORMATION
C5 R E T
Configuration
=
C5
COMBOLIGHT
Recessed Five (5) Light
www.cooperlighting.com
Lamp Type / Wattage Label / Reflector Type
070T6N = 70 Watt T6 G12 Metal Halide / Narrow
070T6M = 70 Watt T6 G12 Metal Halide / Medium
Housing
R = Remodel
070T6W = 70 Watt T6 G12 Metal Halide / Wide
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Power Supply
Voltage
1 = 120V
2 = 277V
Power Supply
E = Electronic Metal Halide
Ballast
Trim Flange
T = 0.75” Trim Flange
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 050108
Loading...