Cooper Lighting RC, RW User Manual
FAIL-SAFE
C
D
A
ARCHITECTURAL VANDAL RESISTANT
®
DIMENSIONS
C
ABC
10 11/16" 3 1/2" 53 3/16"
(272mm) (89mm) (1351mm)
ORDERING INFORMATION
SAMPLE NUMBER: FLRC-80A-120V
DESCRIPTION
The Fail-Safe VR 2000 Linear
Series combines strengthgaining architecture with
A
energy-saving technology.
Architecturally angled facets
with radius corners actually
increase the ability of the lens to
deflect blows and absorb
impact. Extra thick injection
B
molded polycarbonate lens
incorporates optical design
that obscures the lamp image
and spreads light evenly.
Perimeter paint (optional) is
available in 4 standard colors.
Choose VariColor™ to customize
your product with your
RC
RW
LINEAR
FLUORESCENT
corporation or school colors. An
emergency battery pack is
available as an option. U.L. listed
and C.S.A. certified for
32W-80W
Fluorescent
wet locations. VR Products carry
a Lifetime Warranty. For full
information, see warranty
statement at the end of this
section.
VariColor
SPEC ANY COLOR
™
POLYCARBONATE LINEAR
FLUORESCENT LUMINAIRE
CLEAR PRISMATIC OR
WHITE
Lamp Type
FL=T12
Fluorescent
FS=T8
Fluorescent
TT=Twin Tube
Fluorescent
ORDERING MATRIX
Product Family
Linear Series
RC=Clear Prismatic
Polycarbonate
Lens
RW=White
Polycarbonate
Lens
Paint Configuration
PP=Perimeter Paint
(Optional; Black is
standard)
Wattage
64=(2)32W
80=(2)40W
160=(4)40W
T5
56=(2) 28W
Ballast
H=High Power
Factor
A=Electronic
Voltage
120V
277V
Options
F1=Single Fused
EBP=Emergency
Battery Pack
LT=Zero Degree
Starting
Ballast
Color
Blank=Black
(Standard)
WHT=White
DBZ=Bronze
AP=Gray
Accessories
(Order Separately)
VRSD=V-R Screwdriver
for all Lens Screws
VRSB=V-R Screwdriver
Bit
for all Lens Screws
RMK-RC=Row Mount
Kit
• New AccUView coating for
the one piece injection
molded polycarbonate
lens. AccUView is a UV
inhibitor coating inside and
out to lengthen lens life.
Minimum .130" thick with
internal blondels
• Six stainless steel TORX
®
screws with center reject
pin. Screw heads are
recessed
• 16 ga. CRS reflector with
white polyester powder
coat finish
• Lamps by others
• Pressure lock lampholders
• Gasketing is one piece die
cut closed cell and seals
lens and housing
• Standard CBM/ETL Class P
certified ballast. Ballast
securely attached to
housing with mounting
bolts. Wireway cover easily
removed without tools
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and dimensions subject to change without
notice. Products also available in non-US voltages and 50Hz for international markets.
1. Not compatible with EBP. 2. Low temp is standard with electronic ballast. 3. Only available as HPF. * - Does not apply when using
electronic ballast.
COOPER LIGHTING
1429
Loading...