Superior performance for dimmed lighting, low life-cycle
cost, and high power handling capability make RSA’s Profile
Series 20 Amp 2 Circuit / 2 Neutral track an excellent choice.
This system is ideal for dimming intensive applications. The
independent neutrals guarantee that the two circuits are
completely isolated. Cross-circuit interference and neutral
harmonics are completely eliminated, essential for trouble
free dimming. The lack of harmonics ensures superior fixture
performance and longer equipment life. Independent neutrals
also offer twice the power handling capacity of ordinary common
neutral track.
Profile Series 20 Amp 2 Circuit / 2 Neutral track is engineered
to be a durable, dependable, and simple-to-install lighting
solution. The track’s extruded aluminum construction and
continuously crimped conductor ensure mechanical strength
and electrical reliability. The integral suspension rail and predrilled mounting holes of the track simplify installations.
• Independent Neutrals - enable greater power capacity (2 x
20A); Dimming capability-dim on two independent circuits
without harmonics or interference on the neutral conductor.
• Oversized Conductors - for higher operating safety and
reduced overload potential.
• Secure Bus Bar Insulation - firmly crimped insulation secures
both conductors and insulation for the life of product
• Separate Mechanical Suspension Points - provides superior
weight bearing capacity; ensures electrical contact integrity
and reduces likelihood of arcing.
• Polarity Ridge - takes the guesswork out of connector and
track alignment during installation.
Type
Project
TEK4 - Track
FTP4 - Recessed Track Housing
Track and Housing sold separately
ItemTrack LengthFinish
❑ TEK4 20 Amp Track SectionTwo Circuit / Two Neutral
120 Volt Circuit
❑ TEK41 Dead End (Must be ordered separately)❑ 3 White
❑ GES15 Outlet Box Cover❑ 3 White
5.00” sq
ItemLengthFinish
❑ SPUS Stem Kit Includes stem & canopy.
Length
❑ 12”
❑ 18”
❑ 24”
❑ 48”
ItemFinish
❑ SP4P Universal Stem Suspension Point Also works with cable and threaded rod suspension.
Includes bracket and cover. Stem not included.
❑ 2 Black
❑ 2 Black
❑ 3 White
❑ 2 Black
❑ 3 White
❑ 2 Black
❑ SP4T End Feed Stem Suspension Point
Also works with cable and threaded rod suspension.
Includes bracket and cover. Stem not included.
Also available in L, T and X configurations. Specify SP4L, SP4T or SP4X
❑ SKB30 Cable or Threaded Rod Mount Ceiling Cup
❑ SKB34 Cable (Must specify length. Finish not applicable)
❑ SKB32 Plastic Cover Tube for Threaded Rod (65’ Roll)
❑ SKB12 Cable or Threaded Rod Mount Clip
Threaded Rod by others.
❑ 3 White
❑ 2 Black
❑ 3 White
❑ 2 Black
RSA Lighting 9660-9700 Topanga Canyon Blvd. Chatsworth, CA 91311