Cooper Lighting Power Failure Emergecny Light ENC User Manual

INVUE

15 25/32" [400 mm]

7 3/4"

[196 mm]

8 1/8" [206 mm]

IP66 Rated U.L. 1598

Full Cutoff

FCO

CSA Listed 40°C Ambient ISO 9001

Certifications

NOTE: 250W Quartz requires thru-way mounting box. 150W requires
magnetic ballast.

TM

WALL MOUNT

ENC

ENTRI ROUND
CLEAN

26-250W

Metal Halide

WhiteSON High Pressure

Sodium

Compact Fluorescent

Quartz Halogen

ARCHITECTURAL WALL

LUMINAIRE

• One piece die-cast
aluminum construction.
Accommodates either
up or down mounting
configurations with no
modifications

• One piece die-cast
aluminum faceplate
utilizes a continuous
silicone gasket to seal
securely to housing

• Side hinged faceplate
swings open via release
of one (1) flush mount
die-cast aluminum latch
on housing side panel

• Choice of ten (10) high
efficiency optical systems

• Ballast and related
electrical componentry
are heat sunk to the
housing

• Optional die-cast
aluminum adapter box to
allow for surface conduit
wiring, quartz lamp
options, and emergency
battery pack capability

DESCRIPTION

DIMENSIONS

ENTRI Series’ family of modular
faceplate designs provide a
tasteful architectural statement
equally suitable for indoor and
outdoor environments. Available
luminous faceplate window adds
a signature look, while affording
custom color capability.

In downlight only configurations with no
faceplate window.

ORDERING INFORMATION

SAMPLE NUMBER: ENC-150-MH-120-EB-3S-BK-LG-L

1

Lamp Type
MH=Metal Halide
WS=White SON

CF=Compact

2

HL=Quartz

3

4

3

3

5

Product Family
ENC=ENTRI

Round
Clean

Optional Luminous Faceplate Insert
LG=Luminous Glass Insert
LGO=Luminous Glass Insert

with Warm Orange Gel

LGR=Luminous Glass Insert

with Red Gel

LGB=Luminous Glass Insert

with Bright Blue Gel

LGG=Luminous Glass Insert

with Deep Green Gel

Lamp
Wattage
HID
39=39W
70=70W
100=100W
150=150W
Compact
Fluorescent
26=26W
32=32W
42=42W
52=52W
57=57W
64=64W
84=84W
Halogen
100=100W
150=150W
250=250W

High
Pressure
Sodium

Fluorescent

Halogen

14

Options
F=Single Fuse (120, 277 or 347V)

FF=Double Fuse (208, 240 or 480V)

DSAB=Dual Fluorescent Switching

QAB=Quartz Restrike Adapter Box
EMAB=Quartz Restrike with Delay Adapter Box

EM/SCAB=Quartz Emergency Separate Circuit

CF/EMAB=Emergency Battery Backup Adapter Box

PC=Button Type Photocontrol

WG=Wire Guard
FRM=Frosted Main Flat Glass
FRS=Frosted Secondary Flat Glass
L=Lamp Included

Voltage
120=120V
208=208V
240=240V
277=277V

6

347=347V
480=480V

7

DT=Dual-Tap

Wired 277V

MT=Multi-Tap

Wired 277V

TT=Triple-Tap

Wired 347V

UNV=120-277V

14

Specify Voltage

Specify Voltage

Control Adapter Box

(Also Strikes at Cold Start)

Adapter Box

(Specify 120 or 277V)

(specify voltage)

(Standard for all Halogen lamps)

17

8

Universal
Electronic
Ballast

Ballast
MB=Magnetic
EB=Electronic

Ballast

X=None

(for Halogen
Lamp)

9

10

11

15

16

18

Optical System
Downlight or
Uplight (HID or

12

Halogen)
3S=Type III
FT=Forward

Throw

FX=Wall Grazing

Optic

TS=Tight Spot
Downlight and Uplight (HID and Halogen)
3SG=Type III, 90% Main/10% Secondary

Glow

3SP=Type III with Pencil Secondary
FTG=Forward Throw, 90% Main/

10% Secondary Glow

FTP=Forward Throw with Pencil Secondary
FXF=Wall Grazing Optic, 50% up/50% Down
TSF=Tight Spot, 50% up/50% Down
Compact Fluorescent
CFG=90% Main + 10% Secondary Glow
CFM=100% Main, Up or Downlighting

Accessories
VA2001-XX=Thru-way Box
VA2002-XX=Wire Guard Kit

19

ENC

WATTAGE TABLE

Metal Halide 39, 70, 100, 150W

White Son HPS 100W

Compact Fluorescent 26, 32, 42, 57W

Dual Compact Fluorescent (2) 26, (2) 32, (2) 42W

Quartz Halogen 100, 150, 250W

Colors (add as
suffix/must specify)

BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite Metallic

Options &

13

Accessories

(See Below)

• Approximate net weight:
13 lbs. (6 kgs.)

1120

COOPER LIGHTING

NOTES: 1 All MH lamps are T6 envelope with G12 lamp base. All HPS lamps are T6 envelope with GX12 lamp base. 2 All 26/32/42/57W CF lamps feature a 4-pin lamp

base. Available in CFM and CFG distributions only. 3 Dual compact fluorescent lamps. 4 Nominal M.O.L lamp length of 57W CFL not to exceed 7". 5 All Halogen
lamps are T4 envelope with mini-can base, 120V lamp. 6 WhiteSON HPS lamp available in 100W only. Requires electronic ballast. 120/277V only. Includes use of
VA2001 accessory Thru-way Box. 7 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V.
Specify with UNV voltage designation. 8 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and
ordering information. 9 Dual-tap is 120/277V wired 277V. 10 Multi-tap is 120/208/240/277V wired 277V. 11 Triple-tap is 120/277/347V wired 347V. 12 120 through
277V only. Electronic ballasts contain internal fusing, no supplemental fusing is necessary. Electronic ballast available with all CF lamps, and 39/70/100W MH
lamps. Available with 150W MH lamp. Includes VA2001 accessory Thru-way Box. Not available with QAB or EMAB options. 13 Custom and RAL color matching
available upon request. Consult your INVUE Lighting Systems Representative for further information. 14 Add as suffix in the order shown. 15 Dual switching
requires dual 26, 32 or 42W Compact Fluorescent lamps. Allows independent switching control of each lamp through use of two (2) electronic ballasts. Allows
50% power reduction when dual ballasts are independently wired and controlled. 16 CF lamps only. Battery backup operates 90 minutes at minimum 32°F (0°C),
42W maximum. 17 For use in down lighting applications only. 18 Frosted secondary lens provided standard on 3SG, FTG, and CFG distributions. 19 Order
separately, replace XX with color suffix. 20 Specifications and dimensions subject to change without notice.