Cooper Lighting PAR30 120V User Manual

DESCRIPTION
11.38”
22.28”
22.82”
12.88”
45º x 45º
Adjust
Double Gimbal
11.38”
18.74”
12.88”
Thermal
Protector
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for downlighting and accent applications. Utilizes FOUR (4) PAR30 120V lamps in a 2x2 square configuration.
For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing, junction box & trim assembly are all steel construction. Fixture utilizes a removable trim sleeve to provide a
0.75” flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.
B ... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply con­ductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling not required’.
D ... Electrical
Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Electrical components on individually removable “trays” for easy maintenance.
E ... Lamps
Four (4) PAR30 120V lamps mounted in adjustable double gimbals. Lamp holders are individually removable and may be re­gressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is secured with threadless, bayonet ac-
Catalog # Type
Project
Comments Date
Prepared by
tion. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets.
F ... Mounting
Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure.
G ... Labels
cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 12.18” x 12.18”
COMBOLIGHT®
Multi-Lamp Fixture
Four (4) Light Square
w/ 0.75” Trim Flange
Next Generation
Recessed
PAR30 120V
New Construction
Housing
For use with PAR30 120V lamps 75W max.
ORDERING INFORMATION
CX N 120 T
Configuration CX = COMBOLIGHT
Recessed Four (4) Light Square
www.cooperlighting.com
Lamp Type / Wattage Label 075P30 = 75 Watt max. PAR30 120V
Housing N = New Construction C = Chicago Plenum
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Primary Voltage 1 = 120V
Power Supply N = None - Line Voltage Lamp
Lamp Mechanism G = Double Gimbal R = Retractable Double Gimbal
Trim Flange T = 0.75” Trim Flange
Trim Finish W = White B = Black S = Industrial Silver
Housing Interior/Electrical Door/Sleeve Finish W = White B = Black S = Industrial Silver
rev 072908
Loading...