Cooper Lighting PAR20 120V User Manual
DESCRIPTION
Perforated
Meshplate
Thermal
Protector
7.45”
4.65”
12.01”
4.65”
16.14”
15.01”
10.96”
Integral Electronic
Metal Halide Ballast
45º x 45º
Adjust
Double
Gimbal
An adjustable Single-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes ONE (1) PAR20 120V lamp.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to
1.25” ceiling thickness. Optional Chicago
Plenum configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
E ... Lamps
One (1) PAR20 120V lamp mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be regressed 1” for additional cut-off. Lamp can
accept up to three optical accessories (i.e.
lens + hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp ring
Catalog # Type
Project
Comments Date
Prepared by
is secured with threadless, bayonet action. Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes Med. base sockets.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.44” x 5.44”
COMBOLIGHT®
Single-Lamp Fixture
Next Generation
Recessed
One (1) Light
PAR20 120V
New Construction
Housing
Trimless
For use with PAR20 120V lamps 50W max.
ORDERING INFORMATION
C1 N 120 N N
Configuration
C1 = COMBOLIGHT
Recessed One (1) Light
www.cooperlighting.com
Lamp Type / Wattage Label
050P20 = 50 Watt max. PAR20 120V
Housing
N = New Construction
C = Chicago Plenum
Specifications and Dimensions subject to change without notice.
Power Supply
N = None - Line Voltage Lamp
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Primary Voltage
1 = 120V
Trim Insert
N = Trimless
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
Trim Insert Finish
N = Trimless
rev 022408
Loading...