Cooper Lighting P4C800 User Manual

COOPER LIGHTING - LUMARK

8 23/32" [221mm]

2 13/32"
[61mm]

4 5/8"

[117mm]

3 3/4"

[95mm]

8 7/8" [225mm]

7 15/16" [202mm]

DESCRIPTION

The LumaWatt controller
accepts inputs from up to four

INDUSTRIAL

CML

LUMAWATT
INDUSTRIAL HID
DIMMING
SYSTEM

remote-mounted motion
detectors and provides a
low-voltage output capable of
controlling up to 25 fixtures.
Upon receiving a 24 volt DC
signal from an attached
motion sensor or dry contact
switch, it switches connected
fixtures from low intensity to
high, providing maximum
light when an area is occupied
and lowered energy usage
when the area is empty.
U.L. listed and CSA certified.

®

DIMENSIONS

Controls all LumaWatt­Equipped Lumark HID
Industrial Luminaires

CONTROL MODULE

• Low voltage output controls
up to 25 LumaWatt­equipped fixtures

• Allow daisy-chaining of
multiple controllers

• Terminal block provides
input connections for one
to six passive infrared
motion sensors

• Input terminal allows use
of user-supplied dry­contact switch. Switch
overrides motion sensors,
putting system into high
brightness mode

• Standard transformer
accepts 120V or 277V
user-configurable input.
208V, 240V, 347V and
480V are also available

• Three front panel lights
show system status:
amber indicates that the
controller is receiving
power, red indicates that
output from the controller
is at full brightness and
green indicates that
output is at low
brightness

ORDERING INFORMATION

SAMPLE NUMBER: SAMPLE NUMBER: CML-120/277

Aux.

Controller

+ - +

1, 2

Product Family
CML=LumaWatt

Control Module

LumaWatt Lamp Input Watts

Wattage High (HW) Low Change (PC)

Metal Halide

1000W 1080 666 38%

400W 455 238 48%

250W 295 162 45%

175W 209 101 52%

Control

Output

#2

– 2 + + - +

– 2 +

Input Voltage
120/277V=User-selectable 120V or 277V input voltage
208V
240V
347V
480V

Aux.

Controller

Wattage High (HW) Low Change (PC)

High Pressure Sodium

1000W 1100 616 44%

400W 465 215 54%

250W 300 151 50%

150W 196 118 40%

Dry

Contact
– 2 +

• Front panel test switch
provides same function
as remote dry-contact
switch

• CMOS timer maintains
system in full brightness
mode for a 15 minute
warm-up period when
power is applied

• Operating temperature
2°C (35°F)—55°C (131°F)

COOPER LIGHTING

538

NOTES: 1 Products also available in non-US voltages and 50Hz for international markets. Consult your Cooper Lighting Representative for availability and ordering

information. 2 Order separately. 3 Specifications and dimensions are subject to change without notice.