NOTE: 1 150W units are for S55 lamp. 2 Metal Halide requires ED28 lamp. 3 Refer to technical section for lamp/ballast/voltage compatibility. 4 Not available in 400W. 5MOV option is not available for any system requiring a three
position terminal block (Example—240V with PCR wired120V). In order for MOV option to function center terminal of three position terminal block must be connected to “Earth” ground. 
HOUSING
Die-cast aluminum housing with 
stainless steel bail latch. Standard 
grey polyester powder coat finish. 
Other finish colors available. 
Consult your Streetworks 
Representative. Optional NEMA 
twistlock photocontrol receptacle 
also available.
SOCKET
Adjustable mogul-base porcelain 
socket.
DOOR
Die-cast aluminum door frame with 
integral hinges for hands free 
installation, relamping and 
maintenance. ANSI wattage/source 
label.
LENS
Removable tempered flat glass 
lens.
REFLECTOR
The optical system is a 
hydroformed anodized aluminum 
reflector with a Dacron polyester 
filter.
BALLAST ASSEMBLY
Hard mounted ballast with 
encapsulated starter for protection 
from environmental abuse. 
Standard two position tunnel type 
compression terminal block. 
Optional swing-down ballast bridge 
also available (Not available for 3G 
applications).
MOUNTING
Two-bolt/one bracket slipfitter with 
cast-in pipe stop and leveling steps. 
Fixed-in-place birdguard seals 
around 1 1/4" or 2" mounting arms. 
(Birdguard not needed for 2" arm.)
ROADWAY LUMINAIRE
OVF FLAT GLASS
150-400W
MH/HPS/MERCURY
EPA:
Effective Projective Area: .51
SHIPPING DATA
Approximate Net Weight: 
30 lbs. (18 kgs.)
ORDERING INFORMATION 
SAMPLE NUMBER: OVF15SWW2D4
OPTIONS (add as suffix)  
1=Single Fuse, Internally Mounted (120, 277V) 
2=Double Fuse, Internally Mounted (208, 240 & 480V) 
4=Photocontrol Receptacle 
WH=White 
BK=Black 
BZ=Bronze 
E=150W/100V/HPS Ballast 
H=Plug-in Starter Receptacle 
K=Level Indicator  
L=Lamp  
M=MOV Lightning Surge Protector 
5
T=Swing-down Ballast Bridge 
U=UL/CSA Listed
ACCESSORIES (order separately) 
OA/RA1013=Photocontrol Shorting Cap 
OA/RA1014=120V Photocontrol 
OA/RA1016=105V-285V Photocontrol 
OA/RA1027=480V Photocontrol 
OA1028=Field Installed PCR Kit 
OA1214=TufGuard Vandal Shield
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
STREETWORKS
™
OPTIONS + 
ACCESSORIES
(See Below)
PRODUCT 
FAMILY 
OVF
LAMP WATTAGE 
15=150W 
1
20=200W 
25=250W 
31=310W 
40=400W 
2
24=250/400W 
wired 250W 
2
42=400/250W 
wired 400W 
2
LAMP TYPE 
3
S=High Pressure
Sodium
V=Mercury 
4
M=Metal Halide
BALLAST TYPE 
3
C=CWI 
M=Mag. Reg. 
W=CWA 
R=Reac./NPF 
P=Hi. Reac./HPF 
H=Reac./HPF 
N=Hi. Reac./NPF 
K=10KV CWA 
VOLTAGE
3
2=120V 
0=208V 
4=240V 
7=277V 
8=480V 
9=347V 
F=120/240 wired 120V 
P=240 w/PCR wired 120V 
W=Multi-Tap wired 120V 
N=Multi-Tap wired 277V 
V=Multi-Tap wired 240V
DISTRIBUTION 
5
1=Type I 
2=Type II 
3=Type III
CUTOFF 
D=MCO
ROADWAY
OPTIONAL COLORS [Standard color is grey, other finish colors available. Consult your Cooper Lighting representative]
WH
White
BK
Black
BZ
Bronze