Page 1
NEO-RAY
™
SUSPENDED
TWIN BEAM
611-IP
SEMI-INDIRECT
• Minimalist fixture profile –
8.625” wide by 1.75” high.
• Signature void detail.
• Optimized T5 optics for wide
light distribution and good
efficiency.
• Die formed perforated steel
modular housing lengths – 4’
and 8’.
• Incremental mounting on the
ceiling grid - 4’ and 8’
centers.
• Precision die cast end caps.
1-3/4"
[44mm]
SS
8-5/8" [218mm]
Construction: Two piece housing is die-formed
cold rolled steel, forming an 8-5/8” x 1-3/4”
architectural profile. Standard 4’-0” and 8’-0” fixture
lengths combine for individual or continuous runs.
End Caps: End caps are precision die-cast
aluminum, mechanically attached with no exposed
fasteners.
Reflectors: Optical reflectors are die-formed high
reflectance white painted steel.
Electrical: Fixtures use UL listed Class P, T5
program rapid start electronic ballasts. Power factor
of 97% with less than 10% THD. Fixtures and
electrical components certified to UL and CUL
standards.
Finish: Low-gloss white powder coated acrylic
finish.
Mounting: Standard modular mounting includes
hardware that integrates and suspends luminaire
from suspended tile ceiling grid, or from a junction
box with a 1/4-20 threaded stud (by others). Consult
factory for non-standard ceiling applications.
ORDERING INFORMATION:
Sample number: 611-IP-WP-2T5HO-1C-120-AC48-T1-24
Series
611-IP=Twin Beam
Optics Up
W=White Reflector
Optics Down
P=Perforated N=None
Number of Lamps (in cross section)
2=2 Lamps
Lamp Type (not included)
T5=28W (4’ Unit) T5HO=54W (4’ Unit)
Number of Circuits
1=1 Circuit
1
Wiring
C=Standard Circuit E=Emergency/Nightlight
D=Dimming B=Battery Pack
*Slim line ballast only (small case)
1
Voltage
1=120V 2=277V 3=347V U=Universal
Suspension
A=Aircraft Cable P=Rigid Pendant
(single stem)
Power Feed
C=Straight Cord P=Rigid Pendant K=Curly Cord
Suspension Length
FC=Fixed Cable
12”, 15”, 18”, 21”, 24” or 27” (+/- 1/2” adjustment)
AC=Adjustable Cable
48”, 120”, 240”, 300”, or 360”
(infinite adjustment along entire length of cable)
Ceiling Type
T1=1” T-Bar ST=Structure
T9=9/16” T-Bar JB=4” Octagonal J-Box
TS=Slotted T-Bar
Run Length
Specify row length in feet. Rows will be configured with 4’ and 8’
sections.
1
2
712
COOPER LIGHTING
1 Due to various constraints, some options may not be combined with others.
2 Available with 7° or earthquake 45° swivel canopy assembly.
= Slim Line Ballast only.
S
STANDARD LUMINAIRE LENGTHS
MODULAR ROW CONFIGURATION
• Standard length sections join easily to create rows.
• Sections align with T-grid.
• All sections prewired for through-wiring with quick connectors.
NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
Loading...