Cooper Lighting MR16 User Manual
DESCRIPTION
Thermal
Protector
5.75”
20.24”
Integral Low Voltage
Transformers
Perforated
Meshplate
14.11”
14.11”
3.88”
7.75”
7.75”
3.88”
14.07”
18.20”
45º x 45º
Adjust
Double
Gimbal
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FOUR (4) 12V MR16 lamps in a
2x2 square configuration.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to
1.25” ceiling thickness. Optional Chicago
Plenum configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic or magnetic
low voltage transformers on individually
removable “trays” for easy maintenance.
May also be configured for remote power.
E ... Lamps
Four (4) 12V MR16 lamps mounted in
adjustable double gimbals. Lamp holders
are individually removable and may be regressed 1” for additional cut-off. Lamp can
accept up to three optical accessories (i.e.
lens + hex louver + snoot). 45º x 45º locking
Catalog # Type
Project
Comments Date
Prepared by
lamp adjustment. Beveled-edge lamp ring
is secured with threadless, bayonet action.
Optional retractable arm is available for
lamp pulldown and extreme aiming.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 8.55” x 8.55”
COMBOLIGHT®
Multi-Lamp Fixture
Four (4) Light Square
Next Generation
Recessed
12V MR16
New Construction
Housing
Trimless
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
71W magnetic transformers are remote and sold separately.
ORDERING INFORMATION
CX N N
Configuration
=
COMBOLIGHT
CX
Recessed Four (4) Light
Square
www.cooperlighting.com
Housing
N = New Construction
C = Chicago Plenum
Lamp Type / Wattage Label
037M16 = 37 Watt max. MR16 12V
042M16 = 42 Watt max. MR16 12V
050M16 = 50 Watt max. MR16 12V
071M16 = 71 Watt max. MR16 12V
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Power Supply
E = Electronic Low Voltage
M = Magnetic Low Voltage
Power Supply
Voltage
1 = 120V
2 = 277V
Transformer
Transformer
Trim Insert
N = Trimless
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
Trim Insert Finish
N = Trimless
rev 121107
Loading...