Cooper Lighting Metalux Indoor Lighting Accessories User Manual

COOPER LIGHTING - METALUX

®

PARABOLIC, RECESSED AND SURFACE ACCESSORIES (ORDER SEPARATELY)

ACCESSORIES

ACCESSORY DESIGNATION DESCRIPTION

T-Bar Safety Clips EQ-Clip-U (U.L. Listed E61165)

Suspension Sets

SCF SCS SCA

CCA CCA CCA
PFC PFS NPF

(U.L. Listed 912Y) U.L. approved safety clips used to secure recessed

T3A End EQ Bracket Parts Bag EQ end brackets for use on fixture ends.
(Includes (4) Screws and (4) Brackets Use four per fixture

Stem Sets SCF-XX-B Fixed Stem Set

SCS-XX-B Swivel Stem Set

(Deep canopy, 3/8" stem, 5/8"
outside diameter)

XX= Length 6, 8, 12, 24, 36, 48, 60, 72

SCA-48-B Adjustable Stem Set (1/4" IPS Stem, 1/2" O.D.)

Used with all surface fixtures as stem sets. SCS stems have 45° swivel, one direction. One set consists of
one stem assembly. Minimum of two sets required per fixture. NOTE: Coupler, 3/8" IPS Pipe Coupler to
join lengths. Coupler is standard baked white enamel or special order of black.

Cable Sets CCA-XX-PFC-U CCA=Adjustable Cable (XX=48" or 120")

CCA-XX-PFS-U CCF=Fixed Cable (XX=12", 15", 18", 21", 24" or 27")
CCA-XX-NPF-U PFC=Power Feed, coil power cord
CCF-XX-PFC PFS=Power Feed, straight power cord
CCF-XX-PFS NPF=Non Power Feed
CCF-XX-NPF

troffers to T-bar. EQ clips used on fixture sides and

Plaster Frames 95-PF-14 (1x4)

95-PF-22 (2x2)
95-PF-24 (2x4)
95-PF-44 (4x4)

Side Filler Panel SFP-4FT-B Heavy gauge side filler panels for 20" x 48" fixture

Spacer A-1-B/Spacer-U Spaces fixture 1 1/2" to 2 1/2" from ceiling

End Fillers 12-EFS-B (1x2, 1x4) 6" Heavy gauge end fillers use 2 per fixture. End

20-EFS-B (20x48, 20x24) fillers lay on T-bars and are held in place by fixtures

End Support Brackets ESS-B Heavy gauge end support brackets. Four per

CR Wall Mounting Kit CR-WALLKIT Kit including clips to install the CR Surface Corridor

Heavy Gauge Metal Construction. Used with
Flanged Recessed Fixtures. (Intended to serve as
a plaster stop only, not to fit into an opening).

for use in a 2' x 4' ceiling installation. (Baked white
finish/2 per set)

24-EFS-B (2x2, 2x4) but are not attached

fixture are required when fixtures are supported
from ends. Must be used with fixture that has a
modified end plate (MEP).

fixture for wall mount applications.

Items listed are the major accessories available on Metalux Recessed (Parabolic and Recessed) and Surface Fixtures. Additional options and accessories are available.
Consult Pre-Sales Technical Support for additional information.

COOPER LIGHTING

470