Cooper Lighting METALUX F-BAY I8 User Manual

Catalog #

Project

Comments

Prepared by

Type

Date

SPECIFICATION FEATURES

08/02/2008 2:58:16 PM

Consult your representative for additional options and finishes.

Specifications and Dimensions subject to change without notice.

ADF052026

MOUNTING DATA

LAMP CONFIGURATIONS

DESCRIPTION

The F-Bay I8 series is an outstanding solution for high mounting height

industrial or retail applications. The F-Bay I8 optic has been optimized to

provide maximum performance from T8 lamps. Optional uplight component

is provided to enable excellent ceiling uniformity. The I8's high lumen

package allows the benefits of fluorescent to be applied at high mounting

heights that were traditionally exclusive to H.I.D. The primary benefits

include exceptional color rendering, high system efficacy, 95% lumen

maintenance, long lamp life, instant on/instant re-strike, economical

dimming, and uniform brightness control. Primary applications include "big

box" retail, shopping malls, light industrial, school gymnasiums, etc.

A ... Construction

Specification grade full body

housing, end plates and socket

tracks are die formed 20 gauge

cold rolled steel in 4' or 8' lengths.

The housing features an integral

ballast channel that adds strength

and provides numerous KOs for

easy installation.

B ... Electrical

Class "P" ballasts are positively

secured by mounting bolts.

Rotor-lock Bi-Pin lampholders and

optional top ballast access plate

enables service from above

without disturbing the internal

optics. Optional modular power

receptacle meets UL2459 and NEC

410.73 and is UL/cUL rated for

make and break under load from

outside the luminaire to speed

maintenance. UL/cUL listed.

Suitable for damp locations.

C ... Finish

Electrostatically applied baked

white enamel finish is preceded by

a multistage cleaning cycle, iron

phosphate coating with rust

inhibitor.

D ... Downlight/Uplight Optics

Optical modules are fully enclosed

inside housing to protect against

damage. Die formed reflectors are

faceted for efficiency and control

with two optical distributions:

medium and wide. Medium beam

optical modules utilize 95%

specular aluminum finish. Open

downlight design optimizes perfor-

mance with uplight slots available

as an option for nominal 8%

uplight component. An optional

attractive thin blade white baffle

adds longitudinal shielding. A clear

or frosted white acrylic lens is also

available. Optional heavy duty

wireguard can be used with or

without the lens or baffle. Latched

retention of shielding options

(safety leader restraints) allow for

easy access.

Mounting

The I8 series is suited for surface,

suspension mounting with

optional wire hook and chain set,

stem or cable mounting. Top

connector box mounting is also

available. Narrow 11" housing

allows mounting within 12"

horizontally from the nearest edge

of the sprinkler deflector.

Options

Integral Occupancy Sensor

available and provides from 600

sq. ft.(MS) up to 1250 sq. ft. (MSO)

of coverage at a maximum

mounting height of 40'.

F-BAY

I8 Series

4' or 8'

2 LAMPS

Retail/Light Industrial

T8 Linear Fluorescent Hi-Bay

Lighting System

LAMPS CONTAIN MERCURY. DISPOSE ACCORDING

TO LOCAL, STATE OR FEDERAL LAWS

Safe and convenient means of

disconnecting power

E N E R G Y D A T A

EB/Plus Ballast

232 = 73
8T432 = 147

ER Ballast

232 = 57
8T432 = 112

ER/Plus Ballast

232 = 74
8T432 = 144

Luminaire Efficacy Rating

LER =83
Catalog Number: I8-232-UNV-UPL

Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $2.90

* Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements

** Consult Pre Sales Technical Support.

4-15/16"

[126mm]

11" [280mm]

A B C

D

96" [2438mm]

48" [1219mm]

2-3/4" [70mm]

Top Connector Box
Mounting

11/16" [18mm] K.O.
for Cable or Pendant Mounting

11"

[280mm]

11/16" [18mm] K.O.
for Cable or Pendant Mounting

Access Plate

11"

[280mm]

11/16" [18mm] K.O. (2)
for Cable or Pendant Mounting

48" [1219mm]

Top Connector Box
Mounting

Access Plate

11" [280mm]

4-5/8"

[118mm]

4-15/16"

[126mm]

COOPER LIG H T ING - META L U X

®

Specifications and Dimensions subject to change without notice.

PHOTOMETRICS

ORDERING INFORMATION

SHIPPING INFORMATION

I8 Series

F-BAY

C a nde la

Angle Along II 45° Across
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90

2836 2836 2836
2817 2803 2776
2773 2673 2494
2702 2386 2046
2604 2024 1679
2479 1701 1378
2329 1419 1158
2153 1179 918
1956 964 805
1742 761 719
1512 643 673
1271 551 655
1027 492 601

782 457 510
547 368 392
331 264 242
150 133 160

28 31 4

0 5 5

C o effi ci en ts o f Ut il iz at io n

Effective floor cavity reflectance 20%

rc 80% 70% 50% 30% 10% 0%

rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0
1
2
3
4
5
6
7
8
9

10

Z o nal L um en S um ma ry

Zone Lumens %Lamp %Fixture
0-30
0-40
0-60
0-90
0-180

I8-232-UNV-EB81

Electronic Ballast

F0332/735 Lamps
2800 Lumens

Spacing criterion:
(II) 1.2 x mounting
height, ( ) 0.7 x
mounting height

Efficiency 93.9%

Test Report:
236P176C

LER = FL-83

Yearly Cost of 1000
lumens, 3000 hrs at
.08 KWH = $2.90

1776 31.7 33.8
2615 46.7 49.7
3988 71.2 75.9
4789 85.5 91.1
5257 93.9 100.0

110 110 110 110 106106 106 106 100 100 100 94 94 94 88 88 88 86
101 97 94 90 98 94 91 88 89 86 84 84 82 80 79 78 76 74

93 86 80 75 90 83 78 74 79 74 71 75 71 68 71 68 65 63
85 76 69 64 82 74 68 63 70 65 61 67 62 59 63 60 57 54
79 68 61 55 76 67 60 54 63 57 53 60 55 51 57 53 50 48
73 62 54 48 70 60 53 48 57 51 47 55 50 45 52 48 44 42
68 56 49 43 66 55 48 42 53 46 41 50 45 41 48 43 40 38
63 52 44 39 61 50 43 38 48 42 37 46 41 37 44 39 36 34
59 47 40 35 57 46 39 35 45 38 34 43 37 33 41 36 33 31
56 44 37 32 54 43 36 32 41 35 31 40 34 30 38 33 30 28
52 41 34 29 51 40 33 29 39 33 28 37 32 28 36 31 28 26

S AM PL E N UM B ER : 8 TI 8- 23 2- TB W- UN V- EB 82 /P LU S- UP L- U

NOTES:

(1)

Requires use of MC or MPC cord accessories, specify voltage for plugs.

(2)

Use with wide distribution optic only.

(3)

Voltage must be

specified when ordered with plugs, motion sensors or emergency ballasts.

(4)

ER8 and EB8 ballast systems suitable for operation in ambient

environments up to 122°F (50°C) in open uplight configurations.

(5)

Specify voltage.

(6)

For use with Top Connector Box options. See accessories.

(7)

TAP

option available with a maximum of two ballasts, including EM battery pack.

(8)

Not for use in gymnasiums or similar recreational facilities.

(9)

Dimming

ballast must be specified at time of order.

No. of Lamps
2=2 Lamps

Lamp Type
32=32W T8 (4') Lamps

Series
I8=T8 Industrial

Length
Blank=4' Length
8T=8' Length

Voltage

(3)

UNV=Universal

120/277 Voltage
UNC=Universal
347/480 Voltage

120V=120 Volt
277V=277 Volt
347V=347 Volt
480V=480 Volt

Shielding Options
Blank=Open
TBW=Thin White Baffle
FL=Frosted Acrylic Lens & Frame

(2)

CL=Clear Acrylic Lens & Frame
ASY= Asymmetric Directional Louver

(2)

WG=Heavy Duty Wireguard

Distribution Optic
Blank=Medium (Specular Aluminum)
G=Wide (High Reflectance White)

Mounting Arrangement
Blank=Stand Alone
R=Continuous Row Mount

Options
I8 Lamps Installed
L8830=T8 Lamp, 85CRI 3000K
L8835=T8 Lamp, 85CRI 3500K
L8841=T8 Lamp, 85CRI 4100K
L8850=T8 Lamp, 85CRI 5000K

GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed

(3)

Options
NUA=No Uplight Apertures In Housing

(Cannot be combined w/UPL)

UPL=Uplight Apertures
PI/CPI=Plug-In (1, 2 or 3)

(see ordering information)

TILW=Tandem Inline Wiring
MWS=Modular Wiring System
MS=Aisle Coverage Motion Sensor

(5)

MSO=360° Coverage Motion Sensor

(5)

C3=3' Power Cord
C6=6' Power Cord
MP=Modular Power Receptacle

(1) (3)

PC3-=3' Power Cord & Plug (Specify Voltage)
TAP=Top Access Plate

(7)

TCBP=Top Connector Box Plate

(6)

Packaging
U=Unit Pack
PAL=Palletized

Out of Carton
PALC=Palletized
In Carton

Ballast Type
T8 Systems
EB8 =T8 Electronic Instant Start.

(4)

Total Harmonic Distortion < 10%

EB8 /PLUS= T8 Electronic Instant Start.

(4)

High Ballast Factor >1.15.
Total Harmonic Distortion < 10%

ER8 =T8 Electronic Program Rapid Start.

(4)

Total Harmonic Distortion < 10%

ER8 /PLUS= T8 Electronic Program Rapid Start.

High Ballast Factor >1.15.
Total Harmonic Distortion < 10%

DIM=Consult Factory

(9)

No. of Ballast
1, 2 or 3

No. of Ballast
1, 2 or 3

No. of Ballast
1, 2 or 3

Accessories (order separately)
TCB=Top Connector Box
RH-1=Retrofit Hanger
FH-1=Fixture Hook
FL-1=Fixture Loop
SHK=Hook w/ Safety Screw
PC3-=3' Power Cord & Plug (Specify Voltage)
PC6-=6' Power Cord & Plug (Specify Voltage)
AYC-CHAIN/SET/U=(2) Hooks, 36" Chain Sets w/S-

Hooks

(8)

GRIPPLE TOGGLE-=Single Toggle, #2 Cable (Specify 10' or

30')
GRIPPLE LOOP-=Loop Hanger, #2 Cable (Specify 10' or
30')

MC6=6' Modular Power Cord
MPC6=6' Modular Power Cord & Plug (Specify

Voltage)
MMS-CPD1200H=Aisle Motion Sensor, Box, Modular
Power Receptacle (120/277V)
MMS-CPD500H=360° Motion Sensor, Box, Modular
Power Receptacle (120/277V)

Door Frames (for Field Installation)
I8-FRM/LENS PK=Frosted Acrylic Lens & Frame (I8)
I8-FRM/CL PK=Clear Acrylic Lens & Frame (I8)
WG/I8-4FT-B=Heavy Duty Wireguard (I8)
BAFFLE 4FT I8 (White) 11571919=Thin White Blade

Baffle (I8)

BAFFLE 4FT I8=Thin White Blade Baffle (I8)
90801PPK=Asymmetrical Directional Louver

No. of
Ballast
1, 2 or 3

I8-232-UNV-UPL 15 lbs.
8TI8-232-UNV-UPL 30 lbs.

Catalog No. Wt.

Metalux • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]

08/02/2008 2:58:16 PM

ADF052026