Cooper Lighting Metalux 471 User Manual

COOPER LIGHTING - METALUX

STRIPS AND INDUSTRIALS ACCESSORIES (ORDER SEPARATELY)

ACCESSORY DESIGNATION DESCRIPTION

Gripper Hanger GRP-SS-U For mounting on T-bar grid. Use two per fixture.

(Use with SS, IA/IC) Can also be stem mounted or bolted to surface

using 11/16" hole provided. Fixture spacing 1-

1/2".

GRP-STN-U

(Use with STN, STM, IA/IC-HO)

ACCESSORIES

®

Tong Hanger ATG-4-U Heavy Gauge Channel Tong Hanger.

Spacer A-1-B/Spacer-U Spaces fixture 1 1/2" to 2 1/2" from ceiling

Suspension Sets

Stem Sets SCF-XX-B Fixed Stem Set

SCF SCS SCA

Cable Sets CCA-XX-PFC-U CCA=Adjustable Cable (XX=48" or 120")

27")

CCA CCA CCA
PFC PFS NPF

(Use with IA/IC-HO,STN, STM, DI, Use two per fixture. Fixture spacing 1 1/2”.
DIM, DIVM, EI, EIM, EIVM)

ATG-5-U

(Use with STW)

(Use with all Strips and Industrials)

SCS-XX-B Swivel Stem Set
(Deep canopy, 3/8" stem, 5/8"
outside diameter)

XX= Length 6, 8, 12, 24, 36, 48, 60, 72

SCA-48-B Adjustable Stem Set (1/4" IPS Stem, 1/2" O.D.)

Used with all surface fixtures as stem sets. SCS stems have 45° swivel, one direction. One set
consists of one stem assembly. Minimum of two sets required per fixture. NOTE: Coupler, 3/8" IPS
Pipe Coupler to join lengths. Coupler is standard baked white enamel or special order of black.

CCA-XX-PFS-U CCF=Fixed Cable (XX=12", 15", 18", 21", 24" or

CCA-XX-NPF-U PFC=Power Feed, coil power cord
CCF-XX-PFC PFS=Power Feed, straight power cord
CCF-XX-PFS NPF=Non Power Feed
CCF-XX-NPF

Chain Hanger AYC-Chain/Set-U Sturdy wire hook and 36" chain set.

Channel Connector CLC-B Special rigid channel connector designed to give

DI Long Connector DI2 Long Connector Extra support heavy duty channel connector.

Items listed are the major accessories available on Metalux Recessed (Parabolic and Recessed) and Surface Fixtures. Additional
options and accessories are available.
Consult Pre-Sales Technical Support for additional information.

(Use with all strips and industrials Use two per fixture. One set of two provided
except SN and STW)

Eye-Chain/ Set-B Eye bolt and 36" chain.
(SN only) Use two per fixture. One set of two provided

VT2-Chain/ Set-U Eye bolt and 36" chain.

(VT2 only)

extra support to continuous channel installation
(Use with SS, IA/IC). Provision for hanging
device. (LA City Approved)

(Use with STN, STM, DI, DIM, DIVM,
EI, EIM, EIVM, IA/IC-HO)

COOPER LIGHTING

471

COOPER LIGHTING - METALUX

®

STRIPS AND INDUSTRIALS ACCESSORIES (ORDER SEPARATELY)

ACCESSORIES

ACCESSORY DESIGNATION DESCRIPTION

Wire Guards WG/SN-4FT-U (SN) Baked white enamel finish. 14 gauge wire

WG/SS-4FT-U (SS,STN)
WG/IC-4FT-U (IA,IC)

OPTIONS & ASSESSORIES

Gym Guards Gym Guard, GG-DI Baked white enamel finish. 11 gauge wire. Steel
frame (Wire Gym Guard) to support optional shielding.

WG/DI-4FT-U (DI,DIM,DIVM, EIM, EIVM)
WG/STM-4FT-U (STM)
WG/STW-4FT-U (STW)
WG/SSL-R-2FT-B
WG/SSL-R-3FT-B
WG/SSL-R-4FT-B
WG/VT2-4FT-B

(Use with DI, DIM, DIVM)

WG/PA-4FT

(Wire Gym Guard/Acrylic Lens)

DI-SL-AW/FRM (use with Slimline and HO lamps)
DI-RS-AW/FRM (use with Rapid Start lamps)

(Steel Frame/Acrylic Lens)

Egg Crate Louvers MECL-DI/RS-49-3/4-U Baked white enamel finish. Sturdy cold rolled steel

MECL-DI/RS-99-1/2-U (Use with DI, DIM, DIVM)

MECL-DI/SL-48-U

MECL-DI/SL-96-U

Industrial Luminaire INV-IND Designed to allow easy, upside down mounting of
Inverted Mounting DI, DIM, DIVM, EI, EIM, EIVM Industrials. Field

Cricket Strip & Reflector INV-CCA-120-PFC Cost effective indirect lighting solution. Mounting
Inverted Mounting INV-CCA-120-PFS kit is field installed with standard SM strip with

INV-CCA-120-NPF reflector. Variety of mounting options available.
INV-CCA-120-INT Each fixture supported at each endand/ or each

construction. 32° parallel shielding.

installable, easily mounted to standard, unmodified
industrial. Suitable for both stand alone and row

mounted units. For use with stem or cable
mounted accessories.

fixture joining.

Cricket Micro Baffle SM-2-TBW Cost effective indirect lighting solution. Mounting

COOPER LIGHTING

472

472

SM-3-TBW kit is field installed with standard SM strip with
SM-4-TBW reflector. Variety of mounting options available.
SM-5-TBW Each fixture supported at each endand/ or each

SMW-2-TBW fixture joining.