Cooper Lighting MCGRAW-EDISON ZDW, MCGRAW-EDISON 1195 User Manual

MCGRAW-EDISON

18" [457mm]

9" [229mm]

9"

[299mm]

WALL MOUNT

®

DIMENSIONS

HOOK-N-LOCK MOUNTING (Mounting attachment included. J-Box not included)

DESCRIPTION

The Credenza wall sconce full
cutoff wall luminaire has a
traditional style of spherical form
with geometrical symmetry and
balance that gives a blended form
to complement site design.
U.L. listed and CSA Certified for
wet locations in down mounting
applications and damp location in
up mounted applications.

ZDW

CREDENZA

WALL SCONCE

In downlight applications only.

50-175W

High Pressure Sodium

Metal Halide

26-52W

Compact Fluorescent

FULL CUTOFF

WALL MOUNT LUMINAIRE

ORDERING INFORMATION

SAMPLE NUMBER: ZDW-150-MH-MT-2S-BK

5

Voltage
120=120V
208=208V
240=240V
277=277V
480=480V
MT=Multi-Tap
TT=Triple-Tap
DT=Dual-Tap

11, 12, 13, 14

15, 17

13, 14, 18

6

7

8

Distribution
2S=Type II

2

3

11, 12, 13, 14

4

13, 14, 18

Lamp
Type
MH=Metal

Halide

HPS=High

Pressure
Sodium

CF=Compact

Fluorescent

12, 14, 19

20

18, 19

Product
Family
ZDW=Credenza

Wall
Sconce

9

Options
F=Single Fuse (120, 277 or 347V)
FF=Double Fused (208, 240 or 480V)
P=Button Type Photocontrol (Specify Voltage)
TR=Tamper Resistant Screw (Door and Mounting Plate)
L=Lamp Included
Q=Quartz Restrike T4 Lamp
EM=Emergency Quartz Restrike T4 Lamp w/ Time Delay Relay
EMI40-XXX=CFL Cold Weather Emergency Battery Pack (Must specify 120 or 277V)
CF/EM-XXX=Emergency Battery Pack (Must specify 120 or 277V)
QMR=Quartz Restrike MR16 Lamp
EMMR=Emergency Quartz Restrike MR16 Lamp w/ Time Delay Relay
EM/SC=Emergency Separate Circuit T4 Lamp
EM/SC/MR=Emergency Separate Circuit MR16 Lamp
EM/SC/12V=Emergency Separate Circuit (12V)

Lamp
Wattage
HID
50=50W
70=70W
100=100W
150=150W
175=175W
Compact
Fluor
26=26W
32=32W
42=42W
52=(2) 26W

10

1

escent

15, 16

Color
BK=Black
BZ=Bronze
AP=Grey
WH= White
DP=Dark Platinum
GM=Graphite Metallic

Options &
Accessories

(See Below)

• Housing is a two-piece
design of die-cast
aluminum

• Gasketed and zinc plated
rigid steel mounting
attachment fits directly
to 4" J-Box or wall with
“Hook-N-Lock”
mechanism for quick
installation

• All optical modules
utilizes high performance
95% reflective sheet

• Die-cast door mounted
with, 1/8" heat- and
impact-resistant clear
tempered glass lens, with
internal plated steel clips
and sealed with EPDM
gasketing. Hinged door
secured in place via two
(2) captive fasteners

• HID luminaires supplied
with high power factor
ballast with Class H
insulation. Fluorescent
luminaires feature
program start, high
efficient multi-voltage
50/60Hz ballast with -18°C
(0°F) minimum starting

NOTES: 1 All lamps are medium-base. 2 Available only in 120 or 277V and Dual-Tap. 3 Not available in 480V. 4 (2) 26W quad tube lamps only. 5 Product also available

in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 6 Multi-Tap ballast is 120/208/240/277V wired
277V. 7 Triple-Tap ballast is 120/277/347V wired 347V. 8 Dual-Tap ballast is 120/277V wired 277V. 9 Add as suffix in the order shown. 10 Lamp is shipped
separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item.
11 The power might need to cycle and allow HID lamp to cool in warm climates. Available up to 175W HID. 12 For use with T4 double contact DC bayonet
base, 100W maximum, 120V halogen lamp by others. 13 Lamps wired to quartz restrike relay. 14 Not available with CFL. 15 Battery will operate up to 42W CFL
lamp for 90 minutes. 16 CF lamps only, rated for minimum temperature of 0°F (-18°C), (1) 42W CFL maximum, heater rated for 300W with thermostat control.
17 CF lamps only, rated for minimum temperature of 32°F (0°C), (1) 42W CFL maximum. 18 For use with MR16, GU10 base, 50W maximum, 120V halogen
lamp by others. 19 Leads run out back for connection to auxiliary 120V circuit. 20 Supplied with 12V Bi-pin socket for connection to emergency battery pack
(supplied by others). For use with MR16, GU5.3 base, 35W maximum, 12V halogen lamp by others. 21 Specifications and dimensions subject to change
without notice.

• Durable polyester powder
coat finish

• U.L. listed for wet
locations. CSA certified

• Approximate net weight:
18 lbs. (8 kgs.)

COOPER LIGHTING

1195