Cooper Lighting MCGRAW-EDISON 84 - 168W, MCGRAW-EDISON 70 - 200W, MCGRAW-EDISON 85W User Manual

COOPER LIGHTING

MCGRAW-EDISON

®

EPL

ENVOY

70-200W

High Pressure Sodium

Pulse Start Metal Halide

Metal Halide

84-168W

Compact Fluorescent

85W

Induction

PARKING GARAGE

LUMINAIRE

ADH080511

DESCRIPTION

The McGraw Edison Envoy (EPL) is a unique presentation of form,
function and unmatched versatility, making it the right choice for
complex garage lighting applications. A toolless accessible
housing, lens and electrical access is standard. Envoy offers
solutions addressing primary and egress lighting needs for
garages, canopies and other installations where maintenance,
performance and longevity are required. UL and C-UL US listed
for wet locations under UL1598. IP66 Rated.

DIMENSIONS

ENERGY DATA

Hi-Reactance Ballast Input Watts

70W HPS HPF (95 Watts)
70W MP HPF (90 Watts)
100W HPS HPF (130 Watts)
100W MP HPF (129 Watts)
150W HPS HPF (190 Watts)
150W MP HPF (185 Watts)

CWA Ballast Input Watts

175W MH HPF (210 Watts)
175W MP HPF (208 Watts)
200W MP HPF (240 Watts)

Electronic CF Ballast Input Watts

84W CF HPF (93 Watts)
114W CF HPF (127 Watts)
126W CF HPF (139 Watts)
140W CF HPF (154 Watts)
168W CF HPF (186 Watts)

SHIPPING DATA

Approximate Net Weight:

21.5 lbs. (9.8 kgs.)

Catalog #

Typ e

Date

Project

Comments

Prepared by

Construction

Low copper, one-piece
aluminum die-cast electrical
housing features heavy cast
walls designed for effective heat
dissipation and resistance to
corrosion. Toolless aluminum
die-cast latches securely hold
lens in place and aid in efficient
installation and maintenance.
A tamper resistant option is
available to prevent
unauthorized access. Envoy is
IP66 rated, promoting long term
optical efficiency allowing for
fast efficient cleaning by power
washing. All gaskets contained
within Envoy are silicone
material including lens gasket
and housing wire grommet.

Optical
Lens: Lens employs a 2 part

system (upper and lower) by
which the reflector is accurately
located and securely locked in
place. Injection molded, virgin
Acrylic material is standard due
to its ability to resist radiation
from UV and for its superior
clarity (polycarbonate is
available). Lens is attached via
two (2) toolless die-cast latches.
When released, lens will hinge
off housing and remain captive
to allow for easy, obstruction
free lamp placement or electrical
access. Lens perimeter is
completely sealed at housing
junction using a one-piece
extruded, vulcanized silicone
gasket.

Reflectors: Envoy reflectors use
premium materials and a
durable finish process to ensure
longevity of optical performance.
The 3-part reflector system

employs a bright specular
Alzak

®

anodized aluminum
hydro-formed main reflector, a
diffuse anodized aluminum
hydro-formed upper reflector
and die-formed premium 95%
reflective, specular pre­anodized sheet aluminum
inserts. A choice of three (3)
different optical distributions
with a variety of light
controlling media may be used
to optimize your lighting layout
and comply with lighting
ordinances.

Electrical

Each fixture includes all
electrical components hard
mounted to electrical housing
for efficient operation. All HID
units use medium-base type
lamps with standard magnetic,
high power factor ballasts
(minimum starting -30°C (-22°F)
MH-MP/-40°C (-40°F) HPS).
Compact Fluorescent (CF) units
use 4-pin lamp sockets with
standard high power factor
electronic ballast (minimum
starting -18°C (0°F). Induction
lamp features a high frequency,
high power factor generator
(available in 100-120V or 200­277V, minimum starting

-25°C (-13°F) The electrical
reflector cover is keyed and
accessed via two (2) toolless
thumbscrews.

Mounting

Standard fixture mounts to a
square or octagonal 4" surface
or recessed mounted j-box via
electro-zinc plated, heavy-gauge
“quick mount” bracket system,
complete with stainless steel
hanger allowing “hands-free”

SPECIFICATION FEATURES

wiring connection. Enables
efficient fixture mounting,
wiring connection inspection
and fixture removal. Quick
mount plate features stainless
steel springs that help absorb
vibration and aid fixture to slide
and lock in place. A variety of
other mounting options and
accessories including free
swinging balanced pendant
box/bird guard, trunnion mount
and wall mount arm are
available.

Egress Options

Envoy offers multiple egress
lamp sources including quartz
halogen, compact fluorescent
and MR16, available in multiple
circuit options. Compact
fluorescent battery packs are
available integral within fixture
or remote mount in various
wattage configurations.

Finish

Housing is finished in 5 stage
premium TGIC polyester
powder coat paint, 2.5 mil
nominal thickness for superior
protection against fade and
wear. Envoy is supplied
standard in grey and available
in black, white and bronze. RAL
and custom color matches
available. Consult the
McGraw-Edison Architectural
Colors brochure for the
complete selection.

S

Y

S

T

E

M

S

C

E

R

T

I

F

I

E

D

LAMP TYPE WATTAGE

Metal Halide

175W

Pulse Start Metal Halide 70, 100, 150, 175, 200W

High Pressure Sodium 70, 100, 150W

Compact Fluorescent (2) 42, (2) 57, (3) 42, (2) 70, (4) 42W

Induction 85W

16 3/8" (416mm)

13 1/2"

(343mm)

CERTIFICATIONS

IP66 Rated
U.L. 1598 (Wet Locations)
C-UL (Wet Locations)

2G Vibration Tested
40°C Ambient *

NOTES: * Varies by model.

Patents Pending

NOTE: Specifications and dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone] ADH080511

EPL ENVOY

ORDERING INFORMATION

SAMPLE NUMBER: EPL-175-MP-MB-MT-TG-AP-L-EM/SC

EPL

Product Family
EPL=Envoy Parking

Garage Luminaire

Standby + Egress
Options (See Below)

Colors (add as suffix/must specify)
AP=Grey
BZ=Bronze
BK=Black
WH=White

Lamp Wattage
MH

1

175=175W
MP

2

70=70W
100 =100W
150=150W
175=175W
200=200W
HPS
70=70W
100 =100W
150=150W

Voltage

5

120=120V
208=208V
240=240V
277=277V
480=480V
DT=Dual-Tap

6

MT=Multi-Tap

6

TT=Triple-Tap

6

Distribution
RD=Round
SQ=Square
TG=Rectangular

Options (add as suffix)

7

CD=Concentrated

Downlight (Restricts
Uplight 360°)

8

CT=Conduit Taps (Qty (2) 3/4" NPSM)

9

F=Single Fuse (Specify 120, 277 OR 347 in

"Voltage" column).

FF=Double Fuse (Specify 208, 240 OR 480 in

"Voltage" column)

HA=40° C Ambient

10

HL=Hi/Low Dimming

11

L=Lamp Included, HID
LC=Lamp Included, Compact Fluorescent
LQ=Lamp Included, Quartz Halogen DCB
PH=Upper Polycarbonate Lens (Near Aluminum

Back Housing)

PL=Lower Polycarbonate Lens
QD=Quick Disconnect(s) (between reflector

cover/electrical housing)

TMB=Trunnion Mount with Connection Box

(some assembly required)

TMC=Trunnion Mount with Power Cord

(some assembly required)

TR=Tamper Resistant (Torx T15 CPR)
WL=24" Lead Wires

Accessories25(order

separately/replace XX with color
designation)
EPL/PBG-XX=Balanced Pendant

Box/Bird Guard

EPL/WM-XX=Wall Mount Arm

26

EPL/HS=House Side Shield Up and

Downlight 120° Coverage
(HID Lamps Only)

27

EPL/HSCF=House Side Shield Up

and Downlight 120°
Coverage (CF Lamps
Only)

27

EPL/DLS=Drive Lane Shield

28

VRBT15=T15 Torx CPR Tamper

Resistant Driver Bit

VRST15=T15 Torx CPR Tamper

Resistant Screwdriver

EPL/TL=Task Light Field Install Kit

for 120V MR16 lamp (GU10
Base]

EPL/TL12V=Task Light Field Install

Kit for 12V MR16 lamp
(GU5.3 Base)

Lamp Type
MH=Metal Halide
MP=Pulse Start Metal Halide
HPS=High Pressure Sodium
CF=Compact Fluorescent
QL=Induction

Ballast Type
MB=Magnetic

3

EB=Electronic

4

NOTES: 1 Metal Halide lamps with probe start circuit. 2 Pulse Start Metal Halide circuit includes igniter. 3 HID lamps only. 4 Must specify voltage. EB standard on CF. Available integrally in HID 100w MP (max) and 85w QL. HID

availability may vary by lamp source, wattage and voltage. For HID wattages higher than 100w, remote mount ballast possible within 5 feet of unit. Consult customer service. 5 Product also available in non-US
voltages and 50Hz for international markets. Must specify voltages for battery packs. Consult your customer service representative for availability and ordering information. 6 Dual tap ballast is 120/277V wired 277V.
Multi-tap ballast is 120/208/240/277V wired 277V. Triple tap ballast is 120/277/347 wired 347V. 7 Add as suffix in order shown. 8 Requires option PL for use in 40°C application with HID lamps 175-200w. 9 CT option
required for through branch wiring. Through branch wiring is not available with specific configurations including HID CF egress options and fixtures with integral battery pack. 10 Not available with 85w QL and
options using CF lamp sources. Requires option PH on 200-175w HID. 11 Available in 150-200w MP, 175w MH and 70-150w HPS. Operates on 24VDC type output control module. Circuit relay board is mounted
internal to fixture housing with leads exiting back. Requires low voltage wires to control module to be routed in conduit. 12 For use with HID primary lamp only. Quartz lamp 100w maximum. 13 For use with 175w
(max) or less HID primary lamp only. Uses (2) 4 pin CF lamps. CF minimum starting temperature 0°F (-18°C). Remote battery option requires “CT” option. 14 For use with 150w (max) or less HID primary lamp only.
Uses (2) 18w 4 pin CF lamps. Battery rated minimum 32°F/ 0°C. Specify 120 or 277v in "VOLTAGE" column. 15 For use with 168, 126, 84 CF units only. Requires option “CT”. Battery supplied by others. Standby lamp
combination wired by others. 16 For use with 168, 126, 84 CF units only. Battery rated minimum 32°F/ 0°C. Specify 120 or 277v in "VOLTAGE" column. 17 For use with 168, 126, 84 CF units only. Battery rated minimum

-4°F/ -20°C. Specify 120 or 277v in "VOLTAGE" column. 18 For use with 168 CF only. 19 For use with 126 CF only. 20 For use with 84, 114, or 140 CF only. 21 Task Light(s) with separate leads through back of fixture.
Specify TL location by adding to back of option logic (ex.2TLA1A2)-see diagram. Some assembly required, order lamps separately. 22 For use with HID lamps only. Task Light(s) supplied wired to relay. Specify TL
location by adding to back of option logic (ex.2TLA1A2)-see diagram. Some assembly required, order lamps separately. 23 Task Light(s) supplied with separate leads through back of fixture for connection to 12v
circuit or battery system. Specify TL location by adding to back of option logic (ex.2TLA1A2)-see diagram. Some assembly required, order lamps separately. 24 Task Light max quantity (1), supplied with transformer.
Specify TL location by adding to back of option logic (ex.2TLA1A2)-see diagram. Some assembly required, order lamps separately. 25 Order separately, replace XX with color suffix 26 Luminaires require option (WL),
24" Lead Wires. 27 Order additional shield set for more coverage (ex. 2 sets for 180° shielding) Maximum of 2 sets total. 28 Placed towards side of oncoming traffic for 60° shielding coverage. Order (2) for 2-Way
traffic lanes. 29 Some options and accessories are not available in all configurations. Consult your customer service representative for ordering information.

Standby + Egress Lamp Options
T4 Quartz Halogen + Compact Fluorescent Egress Options (For use with HID as primary
lamp source)

Q=Quartz Restrike (hot restrike only, 120v T4 DCB quartz lamp)

12

EM=Quartz Time Delay (hot and cold restrike, 120v T4 DCB quartz lamp)

12

EM/SC=Emergency Separate Circuit (120v T4 DCB quartz lamp)

12

__CFSC=CF (1) Separate Circuit (Specify 52, 64 or 84, supplied with

120-277v electronic ballast)

13

__CFHR=CF Hot Restrike Relay (Specify 52, 64 or 84, supplied with

120-277v electronic ballast)

13

__CFTR=CF Time Delay Relay (Hot and Cold Restrike) (Specify 52, 64 or

84, supplied with 120-277v electronic ballast)

13

CFRB=CF Remote Battery Pack, sockets accommodate 26-42w CF lamps (Battery Pack

specified/supplied/wired by Others)

13

36CFIB=CF Integral Battery Pack operates (2) 18w CFL

14

CFRBT=CF Remote Battery Pack with Time Delay Relay, sockets accommodate 26-42w CF

lamps (Battery Pack specified/supplied/wired by Others)

13

36CFIBT=CF Integral Battery Pack operates (2) 18w CFL with

Time Delay Relay

14

Compact Fluorescent Egress Options (For use with CF as primary lamp source)
RBP=Remote Battery Pack, sockets accommodate 26-42w CF lamps

(CF units only; Battery Pack specified/supplied/wired by Others)

15

42IBP=Integral Battery Pack, (1) 42w CF lamp standby

16

42ICB=Integral Cold Weather Battery Pack, (1) 42w CF lamp standby

17

4CF3=4 CF lamps wired as 3 independent circuits, 3 electronic ballasts (2 lamps/1 lamp/1

lamp)

18

4CF2=4 CF lamps wired as 2 independent circuits, 2 electronic ballasts (2 lamps/2 lamps)

18

3CF2=3 CF lamps wired as 2 independent circuits, 2 electronic ballasts (2 lamps/1 lamp)

19

2CF2=2 CF lamps wired as 2 independent circuits, 2 electronic ballasts (1 lamp/1 lamp)

20

MR16 Quartz Halogen Egress Options (For use with HID or CF as primary lamp source)
TL__=Task Light 120v MR16 (GU10 Twist Lock Base)

21

2TL__=(2) Task Lights 120v MR16 (GU10 Twist Lock Base)

21

TLQ__=Task Light 120v MR16 wired to Hot Restrike Relay (GU10 Twist Lock Base)

22

2TLQ__=(2) Task Lights 120v MR16 wired to Hot Restrike Relay (GU10 Twist Lock Base)

22

TLEM__=Task Light, 120v MR16 wired to Time Delay Relay (GU10 Twist Lock Base)

22

2TLEM__=(2) Task Lights, 120v MR16 wired to Time Delay Relay (GU10 Twist Lock Base)

22

TL12V__=Task Light, 12v MR16 (GU5.3 Bi-Pin Base)

23

2TL12V__= (2) Task Lights, 12v MR16 (GU5.3 Bi-Pin Base)

23

TL__MR__=Task light with transformer (GU5.3 Bi-Pin Base, specify 50 or 75w lamp,

specify 120 or 277v transformer)

24

CF
84= (2) 42W
114 = (2) 57W
126= (3) 42W
140= (2) 70W
168= (4) 42W
Induction
85= 85W

8 3/8"

[213mm]

Adustable to

13 1/4"

13 1/8"

[334mm]

3 7/16" [88mm]

16 5/8"

[423mm]

PENDANT BOX/BIRD GUARD (PBG)TRUNNION-MOUNT (TMB) WALL MOUNT (WM)

20 7/16" [519mm]

13 15/16"
[354mm]

4 1/16"

[104mm]