MCGRAW-EDISON®
D E S C R I P T I O N
Catalog #
The McGraw Edison Envoy (EPL) is a unique presentation of form, |
|
||
function and unmatched versatility, making it the right choice for |
Project |
||
complex garage lighting applications. A toolless accessible |
|||
|
|||
housing, lens and electrical access is standard. Envoy offers |
Comments |
||
solutions addressing primary and egress lighting needs for |
|||
|
|||
garages, canopies and other installations where maintenance, |
|
||
performance and longevity are required. UL and C-UL US listed |
Prepared by |
||
for wet locations under UL1598. IP66 Rated. |
|
||
S P E C I F I C AT I O N F E AT U R E S |
|
|
|
|
|
|
|
C o n s t ru c t i o n |
employs a bright specular |
wiring connection. Enables |
|
Low copper, one-piece |
Alzak® anodized aluminum |
efficient fixture mounting, |
|
aluminum die-cast electrical |
hydro-formed main reflector, a |
wiring connection inspection |
|
housing features heavy cast |
diffuse anodized aluminum |
and fixture removal. Quick |
|
walls designed for effective heat |
hydro-formed upper reflector |
mount plate features stainless |
|
dissipation and resistance to |
and die-formed premium 95% |
steel springs that help absorb |
|
corrosion. Toolless aluminum |
reflective, specular pre- |
vibration and aid fixture to slide |
|
die-cast latches securely hold |
anodized sheet aluminum |
and lock in place. A variety of |
|
lens in place and aid in efficient |
inserts. A choice of three (3) |
other mounting options and |
|
installation and maintenance. |
different optical distributions |
accessories including free |
|
A tamper resistant option is |
with a variety of light |
swinging balanced pendant |
|
available to prevent |
controlling media may be used |
box/bird guard, trunnion mount |
|
unauthorized access. Envoy is |
to optimize your lighting layout |
and wall mount arm are |
|
IP66 rated, promoting long term |
and comply with lighting |
available. |
|
optical efficiency allowing for |
ordinances. |
Egress Options |
|
fast efficient cleaning by power |
|
||
E l e c t ri c a l |
Envoy offers multiple egress |
||
washing. All gaskets contained |
|||
Each fixture includes all |
lamp sources including quartz |
||
within Envoy are silicone |
|||
electrical components hard |
halogen, compact fluorescent |
||
material including lens gasket |
|||
mounted to electrical housing |
and MR16, available in multiple |
||
and housing wire grommet. |
|||
for efficient operation. All HID |
circuit options. Compact |
||
|
|||
O p t i c a l |
units use medium-base type |
fluorescent battery packs are |
|
Lens: Lens employs a 2 part |
lamps with standard magnetic, |
available integral within fixture |
|
system (upper and lower) by |
high power factor ballasts |
or remote mount in various |
|
which the reflector is accurately |
(minimum starting -30°C (-22°F) |
wattage configurations. |
|
located and securely locked in |
MH-MP/-40°C (-40°F) HPS). |
Finish |
|
place. Injection molded, virgin |
Compact Fluorescent (CF) units |
||
Housing is finished in 5 stage |
|||
Acrylic material is standard due |
use 4-pin lamp sockets with |
||
premium TGIC polyester |
|||
to its ability to resist radiation |
standard high power factor |
||
powder coat paint, 2.5 mil |
|||
from UV and for its superior |
electronic ballast (minimum |
||
nominal thickness for superior |
|||
clarity (polycarbonate is |
starting -18°C (0°F). Induction |
||
protection against fade and |
|||
available). Lens is attached via |
lamp features a high frequency, |
||
wear. Envoy is supplied |
|||
two (2) toolless die-cast latches. |
high power factor generator |
||
standard in grey and available |
|||
When released, lens will hinge |
(available in 100-120V or 200- |
||
in black, white and bronze. RAL |
|||
off housing and remain captive |
277V, minimum starting |
||
and custom color matches |
|||
to allow for easy, obstruction |
-25°C (-13°F) The electrical |
||
available. Consult the |
|||
free lamp placement or electrical |
reflector cover is keyed and |
||
McGraw-Edison Architectural |
|||
access. Lens perimeter is |
accessed via two (2) toolless |
||
Colors brochure for the |
|||
completely sealed at housing |
thumbscrews. |
||
complete selection. |
|||
junction using a one-piece |
M o u n t i n g |
||
|
|||
extruded, vulcanized silicone |
|
||
Standard fixture mounts to a |
|
||
gasket. |
|
||
square or octagonal 4" surface |
|
||
Reflectors: Envoy reflectors use |
|
||
or recessed mounted j-box via |
|
||
premium materials and a |
electro-zinc plated, heavy-gauge |
|
|
durable finish process to ensure |
“quick mount” bracket system, |
|
|
longevity of optical performance. |
complete with stainless steel |
|
|
The 3-part reflector system |
hanger allowing “hands-free” |
|
Patents Pending
D I M E N S I O N S
13 1/2" (343mm)
16 3/8" (416mm)
COOPER LIGHTING
|
LAMP TYPE |
WATTAGE |
|
|
Metal Halide |
175W |
|
|
Pulse Start Metal Halide 70, 100, 150, 175, 200W |
|
|
|
High Pressure Sodium |
70, 100, 150W |
|
|
Compact Fluorescent |
(2) 42, (2) 57, (3) 42, (2) 70, (4) 42W |
|
|
Induction |
85W |
|
|
|
|
|
|
CERTIFICATIONS |
|
|
|
|
IP66 Rated |
|
2G Vibration Tested |
|
|
U.L. 1598 (Wet Locations) |
|
40°C Ambient * |
|
|
C-UL (Wet Locations) |
|
|
|
NOTES: * Varies by model. |
|
|
|
Type
Date
EPL
ENVOY
7 0 - 2 0 0 W
H i g h P re s s u re S o d i u m P u l s e S t a r t M e t a l H a l i d e M e t a l H a l i d e
8 4 - 1 6 8 W
C o m p a c t F l u o re s c e n t
8 5 W
I n d u c t i o n
PA R K I N G G A R A G E
L U M I N A I R E
E N E R G Y DATA
Hi-Reactance Ballast Input Watts
70W HPS HPF (95 Watts)
70W MP HPF (90 Watts)
100W HPS HPF (130 Watts)
100W MP HPF (129 Watts)
150W HPS HPF (190 Watts)
150W MP HPF (185 Watts)
CWA Ballast Input Watts
175W MH HPF (210 Watts)
175W MP HPF (208 Watts)
200W MP HPF (240 Watts)
Electronic CF Ballast Input Watts
84W CF HPF (93 Watts)
114W CF HPF (127 Watts)
126W CF HPF (139 Watts)
140W CF HPF (154 Watts)
168W CF HPF (186 Watts)
S H I P P I N G DATA
Approximate Net Weight:
21.5 lbs. (9.8 kgs.)
|
|
|
STE |
MS |
|
S |
Y |
||
|
|
|
|
|
|
E |
|
ED |
|
ADH080511 |
C |
RTIFI |
||
|
|
E P L E N V OY
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: E P L- 1 7 5 - M P- M B - M T- T G - A P- L- E M / S C
EPL
Product Family
EPL=Envoy Parking
Garage Luminaire
Lamp Wattage
MH 1 |
CF |
175=175W |
84= (2) 42W |
MP 2 |
114= (2) 57W |
70=70W |
126= (3) 42W |
100=100W |
140= (2) 70W |
150=150W |
168= (4) 42W |
175=175W |
Induction |
200=200W |
85= 85W |
HPS |
|
70=70W |
|
100=100W |
|
150=150W |
|
Lamp Type
MH=Metal Halide
MP=Pulse Start Metal Halide
HPS=High Pressure Sodium
CF=Compact Fluorescent
QL=Induction
Ballast Type
MB=Magnetic 3
EB=Electronic 4
Voltage 5
120=120V
208=208V
240=240V
277=277V
480=480V DT=Dual-Tap 6 MT=Multi-Tap 6 TT=Triple-Tap 6
Distribution
RD=Round
SQ=Square
TG=Rectangular
Colors (add as suffix/must specify) AP=Grey
BZ=Bronze
BK=Black
WH=White
Standby + Egress Lamp Options
T4 Quartz Halogen + Compact Fluorescent Egress Options (For use with HID as primary lamp source)
Q=Quartz Restrike (hot restrike only, 120v T4 DCB quartz lamp) 12 EM=Quartz Time Delay (hot and cold restrike, 120v T4 DCB quartz lamp) 12 EM/SC=Emergency Separate Circuit (120v T4 DCB quartz lamp) 12 __CFSC=CF (1) Separate Circuit (Specify 52, 64 or 84, supplied with
120-277v electronic ballast) 13
__CFHR=CF Hot Restrike Relay (Specify 52, 64 or 84, supplied with 120-277v electronic ballast) 13
__CFTR=CF Time Delay Relay (Hot and Cold Restrike) (Specify 52, 64 or 84, supplied with 120-277v electronic ballast) 13
CFRB=CF Remote Battery Pack, sockets accommodate 26-42w CF lamps (Battery Pack specified/supplied/wired by Others) 13
36CFIB=CF Integral Battery Pack operates (2) 18w CFL 14
CFRBT=CF Remote Battery Pack with Time Delay Relay, sockets accommodate 26-42w CF lamps (Battery Pack specified/supplied/wired by Others) 13
36CFIBT=CF Integral Battery Pack operates (2) 18w CFL with Time Delay Relay 14
Options (add as suffix) 7 |
|
|
|
|
|
|
|
Standby + Egress |
|||
CD=Concentrated |
Options (See Below) |
||
Downlight (Restricts |
|
|
|
Uplight 360°) 8 |
|
|
|
CT=Conduit Taps (Qty (2) 3/4" NPSM) 9 F=Single Fuse (Specify 120, 277 OR 347 in
"Voltage" column).
FF=Double Fuse (Specify 208, 240 OR 480 in "Voltage" column)
HA=40° C Ambient 10
HL=Hi/Low Dimming 11
L=Lamp Included, HID
LC=Lamp Included, Compact Fluorescent LQ=Lamp Included, Quartz Halogen DCB PH=Upper Polycarbonate Lens (Near Aluminum
Back Housing)
PL=Lower Polycarbonate Lens
QD=Quick Disconnect(s) (between reflector cover/electrical housing)
TMB=Trunnion Mount with Connection Box (some assembly required)
TMC=Trunnion Mount with Power Cord (some assembly required)
TR=Tamper Resistant (Torx T15 CPR) WL=24" Lead Wires
Accessories 25 (order separately/replace XX with color designation) EPL/PBG-XX=Balanced Pendant
Box/Bird Guard EPL/WM-XX=Wall Mount Arm 26 EPL/HS=House Side Shield Up and
Downlight 120° Coverage (HID Lamps Only) 27
EPL/HSCF=House Side Shield Up and Downlight 120° Coverage (CF Lamps Only) 27
EPL/DLS=Drive Lane Shield 28
VRBT15=T15 Torx CPR Tamper
Resistant Driver Bit
VRST15=T15 Torx CPR Tamper
Resistant Screwdriver
EPL/TL=Task Light Field Install Kit
for 120V MR16 lamp (GU10
Base]
EPL/TL12V=Task Light Field Install
Kit for 12V MR16 lamp
(GU5.3 Base)
Compact Fluorescent Egress Options (For use with CF as primary lamp source) RBP=Remote Battery Pack, sockets accommodate 26-42w CF lamps
(CF units only; Battery Pack specified/supplied/wired by Others) 15 42IBP=Integral Battery Pack, (1) 42w CF lamp standby 16 42ICB=Integral Cold Weather Battery Pack, (1) 42w CF lamp standby 17
4CF3=4 CF lamps wired as 3 independent circuits, 3 electronic ballasts (2 lamps/1 lamp/1 lamp) 18
4CF2=4 CF lamps wired as 2 independent circuits, 2 electronic ballasts (2 lamps/2 lamps) 18 3CF2=3 CF lamps wired as 2 independent circuits, 2 electronic ballasts (2 lamps/1 lamp) 19 2CF2=2 CF lamps wired as 2 independent circuits, 2 electronic ballasts (1 lamp/1 lamp) 20
MR16 Quartz Halogen Egress Options (For use with HID or CF as primary lamp source) TL__=Task Light 120v MR16 (GU10 Twist Lock Base) 21
2TL__=(2) Task Lights 120v MR16 (GU10 Twist Lock Base) 21
TLQ__=Task Light 120v MR16 wired to Hot Restrike Relay (GU10 Twist Lock Base) 22 2TLQ__=(2) Task Lights 120v MR16 wired to Hot Restrike Relay (GU10 Twist Lock Base) 22 TLEM__=Task Light, 120v MR16 wired to Time Delay Relay (GU10 Twist Lock Base) 22 2TLEM__=(2) Task Lights, 120v MR16 wired to Time Delay Relay (GU10 Twist Lock Base) 22 TL12V__=Task Light, 12v MR16 (GU5.3 Bi-Pin Base) 23
2TL12V__= (2) Task Lights, 12v MR16 (GU5.3 Bi-Pin Base) 23
TL__MR__=Task light with transformer (GU5.3 Bi-Pin Base, specify 50 or 75w lamp, specify 120 or 277v transformer) 24
8 3/8" |
|
|
[213mm] |
|
|
Adustable to |
|
|
13 1/4" |
20 7/16" [519mm] |
3 7/16" [88mm] |
|
|
16 5/8" |
13 1/8" |
13 15/16" |
[423mm] |
[354mm] |
|
|
[334mm] |
|
|
TRUNNION-MOUNT (TMB) |
WALL MOUNT (WM) |
PENDANT BOX/BIRD GUARD (PBG) |
NOTES: 1 Metal Halide lamps with probe start circuit. 2 Pulse Start Metal Halide circuit includes igniter. 3 HID lamps only. 4 Must specify voltage. EB standard on CF. Available integrally in HID 100w MP (max) and 85w QL. HID availability may vary by lamp source, wattage and voltage. For HID wattages higher than 100w, remote mount ballast possible within 5 feet of unit. Consult customer service. 5 Product also available in non-US voltages and 50Hz for international markets. Must specify voltages for battery packs. Consult your customer service representative for availability and ordering information. 6 Dual tap ballast is 120/277V wired 277V. Multi-tap ballast is 120/208/240/277V wired 277V. Triple tap ballast is 120/277/347 wired 347V. 7 Add as suffix in order shown. 8 Requires option PL for use in 40°C application with HID lamps 175-200w. 9 CT option required for through branch wiring. Through branch wiring is not available with specific configurations including HID CF egress options and fixtures with integral battery pack. 10 Not available with 85w QL and options using CF lamp sources. Requires option PH on 200-175w HID. 11 Available in 150-200w MP, 175w MH and 70-150w HPS. Operates on 24VDC type output control module. Circuit relay board is mounted internal to fixture housing with leads exiting back. Requires low voltage wires to control module to be routed in conduit. 12 For use with HID primary lamp only. Quartz lamp 100w maximum. 13 For use with 175w (max) or less HID primary lamp only. Uses (2) 4 pin CF lamps. CF minimum starting temperature 0°F (-18°C). Remote battery option requires “CT” option. 14 For use with 150w (max) or less HID primary lamp only. Uses (2) 18w 4 pin CF lamps. Battery rated minimum 32°F/ 0°C. Specify 120 or 277v in "VOLTAGE" column. 15 For use with 168, 126, 84 CF units only. Requires option “CT”. Battery supplied by others. Standby lamp combination wired by others. 16 For use with 168, 126, 84 CF units only. Battery rated minimum 32°F/ 0°C. Specify 120 or 277v in "VOLTAGE" column. 17 For use with 168, 126, 84 CF units only. Battery rated minimum -4°F/ -20°C. Specify 120 or 277v in "VOLTAGE" column. 18 For use with 168 CF only. 19 For use with 126 CF only. 20 For use with 84, 114, or 140 CF only. 21 Task Light(s) with separate leads through back of fixture. Specify TL location by adding to back of option logic (ex.2TLA1A2)-see diagram. Some assembly required, order lamps separately. 22 For use with HID lamps only. Task Light(s) supplied wired to relay. Specify TL location by adding to back of option logic (ex.2TLA1A2)-see diagram. Some assembly required, order lamps separately. 23 Task Light(s) supplied with separate leads through back of fixture for connection to 12v circuit or battery system. Specify TL location by adding to back of option logic (ex.2TLA1A2)-see diagram. Some assembly required, order lamps separately. 24 Task Light max quantity (1), supplied with transformer. Specify TL location by adding to back of option logic (ex.2TLA1A2)-see diagram. Some assembly required, order lamps separately. 25 Order separately, replace XX with color suffix 26 Luminaires require option (WL), 24" Lead Wires. 27 Order additional shield set for more coverage (ex. 2 sets for 180° shielding) Maximum of 2 sets total. 28 Placed towards side of oncoming traffic for 60° shielding coverage. Order (2) for 2-Way traffic lanes. 29 Some options and accessories are not available in all configurations. Consult your customer service representative for ordering information.
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH080511