DESCRIPTION
18.00”
Flexible Conduit
3.50” dia.
2.25” dia.
8.90”
20º
2.00”
A
D
B
C
E
5.50”
Miniature cylindrical recessed housing and round trim with adjustable
gimbal. Includes enclosure with integral electronic metal halide ballast and
wiring compartment.
For new construction or remodel applications. Insulation must be kept 3”
from all sides and at least 1” above the housing.
SPECIFICATION FEATURES
A ...Housing
All aluminum construction with 18” of
flexible conduit attached to a cylindrical
transformer/wiring enclosure. Swing
out mounting clips form pressure fit for
mounting in 1/2” - 3/4” drywall.
B ...Trim:
3.5” o.d. round trim with adjustable gimbal - up to 20º. Finished in white, black,
industrial silver, stainless steel (painted),
and custom colors.
C ...System Protection:
Thermal protection inside housing.
Vent holes in housing provide cooler
D ...Electrical
Electronic metal halide ballast housed
in a separate metal enclosure.
Enclosure includes a separated wiring
compartment and entry for primary
leads.
E ...Lamp
Metal Halide ES16 in 20/39 watts or
CMHMR16 in 20 watts. (not included). GX10
twist-lock lamp socket for firm, mechanical
lamp connection. Can accept one (1)
optical accessory total.
Ceiling Cut-Out: 3.19” dia.
operation. All aluminum construction
provides overall reduced temperatures.
Catalog # Type
Project
Comments Date
Prepared by
LYNX
LX3002MH
Miniature Round
Trim w/ Adjustable
Gimbal
ORD ERI NG INF ORM ATIO N
LX3002MH
Fixture
LX3002MH
Regressed Adjustable Gimbal
Lynx Trim with Housing &
Ballast Enclosure
Finish
WH = White
BK = Black
S = Industrial Silver
SS = Stainless Steel (painted)
PM = Primer
Lamp/Ballast Wattage
20 = 20 watts
39 = 39 watts
Voltage
120 = 120 volts
277 = 277 volts
Cylindrical Housing
Ballast/Wiring
Enclosure
ES16 Metal Halide 20 or 39 watts
CMHMR16 Metal Halide 20 watts
U.L. Listed. Suitable for use in
combustible ceilings.
www.coo perlighti ng.com
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349- 3031
rev. 011007