Cooper Lighting LUMARK PR Parker User Manual

DIMENSIONS MOUNTING DIMENSIONS

7 "

[178mm]

3 3/16" [81mm]

11 5/8" sq.

[295mm]

(4) 9/32" Dia. [7mm]

Mounting Holes

8 7/16" sq.

[214mm]

COOPER LIGHTING - LUMARK

DESCRIPTION

The Lumark Parker combines strength-gaining architecture with energy-saving technology. U.L. listed for wet locations and CSA certified. Mount on non-combustible surface.

The durable, versatile Parker is perfect for use in parking bays, entrances and stairwells, as well as rapid transit stations and loading docks.

70-175W

High Pressure Sodium

Metal Halide

PARKER

CANOPY

ORDERING INFORMATION

SAMPLE NUMBER: HPPR-70N-240V-XX

Lamp Type HP=High

Pressure Sodium

MH=Metal

Halide

Options Q=Quartz Restrike DC Bayonet Base

(Quartz lamp will not come on at initial cold start)

QM=Quick Mount LL=Lamp Included TR=Tamper Resistant Screws F1=Single Fuse (120, 277 or 347V) F2=Double Fuse (208, 240 or 480V)

Series PR=Parker

Lamp Wattage 70=70W 100=100W 150=150W 175=175W

CLEAR PRISMATIC

POLYCARBONATE

PARKING GARAGE

LUMINAIRE

Ballast H=Normal

Power

Factor

N=Normal

Power Factor

W=HPF CWA

Voltage 120V 208V 240V 277V 347V 480V MT=Multi-Tap wired 277V TT=Triple-Tap wired 347V

Options & Accessories

(See Below)

• One-piece injectionmolded UV stabilized polycarbonate lens is a minimum of 0.130" thick. All light-control prisms and blondels are on the inside surface of the lens, reducing dirt build-up and making cleaning easier

• Lens is held with four

Accessories TK=Trunnion Kit VRSD=Tamper-Resistant Screwdriver VRSB=Tamper-Resistant Bit

stainless steel screws. Fasteners are captive in the lens and sealed by means of a neoprene O-ring

• Die-cast aluminum with reinforcing ribs on exposed sidewalls. Thickened areas occur at lens junction and at mounting/fastening holes. Four 1/2" NPT conduit entries in sides and one

in back of housing. Black polyester powder coat is standard

NOTES: 1 Uses S-55 (55 Volt) lamp only. 2 Not Available in 70 & 100W Metal Halide. 3 Products also available in non-US voltages and 50Hz for international markets.

Consult factory for availability and ordering information. 4 Multi-Tap ballast is 120/208/240/277V wired 277V. 5 Triple-Tap ballast is 120/277/347V wired 347V. Add desired voltage to end of catalog number. 6 Add as suffix in the order shown. 7 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 8 Order separately. 9 Specifications and dimensions subject to change without notice.

• One-piece die-cut closed-cell silicone mounting gasket

• Copper-wound NPF ballast standard. Ballast is available in high power factor with some lamps. Consult ordering information

• Porcelain medium-base socket with nickel-plated brass screwshell

• Approximate net weight: 20 lbs. (9 kgs.)

COOPER LIGHTING

551